AD621AR vs AD621BNZ तुलना

विस्तृत दोनों ओर की तुलना AD621AR द्वारा Analog Devices और AD621BNZ द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Analog Devices
AD621AR AD621AR - Low-Power Instrumentation Amplifier | Analog Devices

AD621AR - Low-Power Instrumentation Amplifier | Analog Devices

AD621AR ✓ सक्रिय
Analog Devices
AD621BNZ AD621BNZ Low-Power Instrumentation Amplifier | Analog Devices

AD621BNZ Low-Power Instrumentation Amplifier | Analog Devices

AD621BNZ ✓ सक्रिय

विशेषता तुलना

पैरामीटर AD621AR AD621BNZ
ब्रांड Analog Devices Analog Devices
श्रेणी Amplifier ICs Amplifier ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Single-channel instrumentation amplifier Instrumentation amplifier
Manufacturer Analog Devices —
पैकेज 8-SOIC 8-pin PDIP
Number of Circuits 1 circuit —
Architecture Integrated three-op-amp instrumentation-amplifier architecture —
Power Class Low power —
Drift Class Low drift —
Accuracy Class High accuracy —
सप्लाई वोल्टेज ±18 V maximum —
Gain Range 10 to 10,000 —
Gain Error [DATA_NEEDED: maximum gain error] —
Gain Drift [DATA_NEEDED: maximum gain drift] —
Input Offset Voltage [DATA_NEEDED: input offset voltage] 125 µV typical
Input Bias Current [DATA_NEEDED: input bias current] 1 nA listed for AD621BNZ comparison
Common-Mode Rejection Ratio [DATA_NEEDED: minimum common-mode rejection ratio] 120 dB to 130 dB, condition dependent
Small-Signal Bandwidth [DATA_NEEDED: gain-dependent bandwidth] —
Slew Rate [DATA_NEEDED: slew rate] 1.2 V/µs typical
सप्लाई करंट [DATA_NEEDED: typical and maximum supply current] [DATA_NEEDED: supply current]
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
RoHS स्थिति [DATA_NEEDED: RoHS status] unknown
REACH Status [DATA_NEEDED: REACH status] unknown
Number of Amplifiers — 1 circuit
Supply Voltage Range — ±2.3 V to ±18 V
Bandwidth — 800 kHz typical
Gain — 10 or 100, pin-strappable
आउटपुट प्रकार — Single-ended
Operating Voltage — ±2.3 V to ±18 V
Internal Gain Setting — Internal resistor gain
ESD Protection — Yes
माउंटिंग प्रकार — Through-hole
AEC-Q100 Qualification — not_applicable
Input Common-Mode Range — [DATA_NEEDED: input common-mode range]
आउटपुट वोल्टेज रेंज — [DATA_NEEDED: output voltage range]
Reference Input Range — [DATA_NEEDED: reference input range]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध