AD621AR vs AD621BNZ 비교
다음의 상세 나란히 비교: AD621AR 제조: Analog Devices 및 AD621BNZ 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | AD621AR | AD621BNZ |
|---|---|---|
| 브랜드 | Analog Devices | Analog Devices |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Product Type | Single-channel instrumentation amplifier | Instrumentation amplifier |
| Manufacturer | Analog Devices | — |
| 패키지 | 8-SOIC | 8-pin PDIP |
| Number of Circuits | 1 circuit | — |
| Architecture | Integrated three-op-amp instrumentation-amplifier architecture | — |
| Power Class | Low power | — |
| Drift Class | Low drift | — |
| Accuracy Class | High accuracy | — |
| 공급 전압 | ±18 V maximum | — |
| Gain Range | 10 to 10,000 | — |
| Gain Error | [DATA_NEEDED: maximum gain error] | — |
| Gain Drift | [DATA_NEEDED: maximum gain drift] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | 125 µV typical |
| Input Bias Current | [DATA_NEEDED: input bias current] | 1 nA listed for AD621BNZ comparison |
| Common-Mode Rejection Ratio | [DATA_NEEDED: minimum common-mode rejection ratio] | 120 dB to 130 dB, condition dependent |
| Small-Signal Bandwidth | [DATA_NEEDED: gain-dependent bandwidth] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | 1.2 V/µs typical |
| 공급 전류 | [DATA_NEEDED: typical and maximum supply current] | [DATA_NEEDED: supply current] |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| RoHS 상태 | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| Number of Amplifiers | — | 1 circuit |
| Supply Voltage Range | — | ±2.3 V to ±18 V |
| Bandwidth | — | 800 kHz typical |
| Gain | — | 10 or 100, pin-strappable |
| 출력 유형 | — | Single-ended |
| Operating Voltage | — | ±2.3 V to ±18 V |
| Internal Gain Setting | — | Internal resistor gain |
| ESD Protection | — | Yes |
| 실장 유형 | — | Through-hole |
| AEC-Q100 Qualification | — | not_applicable |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode range] |
| 출력 전압 범위 | — | [DATA_NEEDED: output voltage range] |
| Reference Input Range | — | [DATA_NEEDED: reference input range] |