AD621AR vs AD621BNZ Comparação
Comparação detalhada lado a lado de AD621AR por Analog Devices e AD621BNZ por Analog Devices. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Comparação de especificações
| Parâmetro | AD621AR | AD621BNZ |
|---|---|---|
| Marca | Analog Devices | Analog Devices |
| Categoria | Amplifier ICs | Amplifier ICs |
| Status do ciclo de vida | Ativo | Ativo |
| Product Type | Single-channel instrumentation amplifier | Instrumentation amplifier |
| Manufacturer | Analog Devices | — |
| Encapsulamento | 8-SOIC | 8-pin PDIP |
| Number of Circuits | 1 circuit | — |
| Architecture | Integrated three-op-amp instrumentation-amplifier architecture | — |
| Power Class | Low power | — |
| Drift Class | Low drift | — |
| Accuracy Class | High accuracy | — |
| Tensão de alimentação | ±18 V maximum | — |
| Gain Range | 10 to 10,000 | — |
| Gain Error | [DATA_NEEDED: maximum gain error] | — |
| Gain Drift | [DATA_NEEDED: maximum gain drift] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | 125 µV typical |
| Input Bias Current | [DATA_NEEDED: input bias current] | 1 nA listed for AD621BNZ comparison |
| Common-Mode Rejection Ratio | [DATA_NEEDED: minimum common-mode rejection ratio] | 120 dB to 130 dB, condition dependent |
| Small-Signal Bandwidth | [DATA_NEEDED: gain-dependent bandwidth] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | 1.2 V/µs typical |
| Corrente de alimentação | [DATA_NEEDED: typical and maximum supply current] | [DATA_NEEDED: supply current] |
| Faixa de temperatura de operação | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Status RoHS | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | unknown |
| Number of Amplifiers | — | 1 circuit |
| Supply Voltage Range | — | ±2.3 V to ±18 V |
| Bandwidth | — | 800 kHz typical |
| Gain | — | 10 or 100, pin-strappable |
| Tipo de saída | — | Single-ended |
| Operating Voltage | — | ±2.3 V to ±18 V |
| Internal Gain Setting | — | Internal resistor gain |
| ESD Protection | — | Yes |
| Tipo de montagem | — | Through-hole |
| AEC-Q100 Qualification | — | not_applicable |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode range] |
| Faixa de tensão de saída | — | [DATA_NEEDED: output voltage range] |
| Reference Input Range | — | [DATA_NEEDED: reference input range] |