INA116UAG4 vs INA116UA Comparison
Detailed side-by-side comparison of INA116UAG4 by Texas Instruments and INA116UA by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
INA116UAG4 - 3 fA Input Bias Instrumentation Amplifier | Texas Instruments
INA116UAG4 ObsoleteTexas Instruments
INA116UA - 3fA Ultra-Low Bias In-Amp SOIC-16 | Texas Instruments
INA116UA ✓ ActiveSpecification Comparison
| Parameter | INA116UAG4 | INA116UA |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Amplifier ICs | Amplifier ICs |
| Lifecycle Status | Obsolete | Active |
| Product Type | Ultra-low-input-bias-current instrumentation amplifier | — |
| Input Bias Current at 25°C | 3 fA typical | — |
| Input Bias Current at 85°C | 25 fA typical | — |
| Gain Range | 1 to 1000 | 1 V/V to 1000 V/V (single external resistor) |
| Gain Setting Method | 1 external resistor | — |
| Internal Topology | 3-op-amp instrumentation amplifier | — |
| Input Stage | Monolithic FET input | — |
| Bandwidth | 800 kHz -3 dB | 800 kHz |
| Slew Rate | 0.8 V/µs | — |
| Number of Circuits | 1 circuit | — |
| Differential Input | Yes | — |
| Input Guarding | Special input guarding techniques | — |
| Package | 16-pin SOIC | 16-SOIC (0.295 in, 7.50 mm width) |
| Package Code | UA | — |
| Mounting Type | Surface mount | Surface Mount |
| Temperature Grade | Industrial | — |
| Amplifier Type | Standard general-purpose instrumentation amplifier | Instrumentation Amplifier |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | 9 V to 36 V total (dual or single supply) |
| Operating Temperature Range | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Common-Mode Input Range | [DATA_NEEDED: common-mode input voltage range] | — |
| Output Voltage Range | [DATA_NEEDED: output voltage range] | — |
| RoHS Status | [DATA_NEEDED: RoHS compliance] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance] | — |
| Number of Channels | — | 1 |
| Input Bias Current | — | 3 fA typ at 25C |
| Input Bias Current at 85C | — | 25 fA |
| Input Offset Voltage | — | 2 mV max |
| Input Voltage Noise | — | 28 nV/sqrt(Hz) at 1 kHz |
| Quiescent Current | — | 1 mA |
| Input Topology | — | Difet FET inputs with buffered guard drive |
| Guard Drive Pins | — | Yes (buffered, adjacent to both inputs) |
| Input Overvoltage Protection | — | Yes (internal) |