INA116UAG4 vs INA116UA Сравнение

Подробное сравнение бок о бок INA116UAG4 от Texas Instruments и INA116UA от Texas Instruments. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.

Texas Instruments
INA116UA INA116UA - 3fA Ultra-Low Bias In-Amp SOIC-16 | Texas Instruments

INA116UA - 3fA Ultra-Low Bias In-Amp SOIC-16 | Texas Instruments

INA116UA ✓ Активен

Сравнение характеристик

Параметр INA116UAG4 INA116UA
Бренд Texas Instruments Texas Instruments
Категория Amplifier ICs Amplifier ICs
Статус жизненного цикла Obsolete Активен
Product Type Ultra-low-input-bias-current instrumentation amplifier —
Input Bias Current at 25°C 3 fA typical —
Input Bias Current at 85°C 25 fA typical —
Gain Range 1 to 1000 1 V/V to 1000 V/V (single external resistor)
Gain Setting Method 1 external resistor —
Internal Topology 3-op-amp instrumentation amplifier —
Input Stage Monolithic FET input —
Bandwidth 800 kHz -3 dB 800 kHz
Slew Rate 0.8 V/µs —
Number of Circuits 1 circuit —
Differential Input Yes —
Input Guarding Special input guarding techniques —
Корпус 16-pin SOIC 16-SOIC (0.295 in, 7.50 mm width)
Package Code UA —
Тип монтажа Surface mount Surface Mount
Temperature Grade Industrial —
Amplifier Type Standard general-purpose instrumentation amplifier Instrumentation Amplifier
Supply Voltage Range [DATA_NEEDED: supply voltage range] 9 V to 36 V total (dual or single supply)
Диапазон рабочих температур [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Common-Mode Input Range [DATA_NEEDED: common-mode input voltage range] —
Диапазон выходного напряжения [DATA_NEEDED: output voltage range] —
Статус RoHS [DATA_NEEDED: RoHS compliance] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH compliance] —
Number of Channels — 1
Input Bias Current — 3 fA typ at 25C
Input Bias Current at 85C — 25 fA
Input Offset Voltage — 2 mV max
Input Voltage Noise — 28 nV/sqrt(Hz) at 1 kHz
Ток покоя — 1 mA
Input Topology — Difet FET inputs with buffered guard drive
Guard Drive Pins — Yes (buffered, adjacent to both inputs)
Input Overvoltage Protection — Yes (internal)

Даташиты & ресурсы

Все товары Создать BOM Запросить цену