INA116UAG4 vs INA116UA 比較
詳細な並列比較: INA116UAG4 メーカー: Texas Instruments および INA116UA メーカー: Texas Instruments。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
Texas Instruments
INA116UAG4 - 3 fA Input Bias Instrumentation Amplifier | Texas Instruments
INA116UAG4 Obsolete仕様比較
| パラメータ | INA116UAG4 | INA116UA |
|---|---|---|
| ブランド | Texas Instruments | Texas Instruments |
| カテゴリ | Amplifier ICs | Amplifier ICs |
| ライフサイクル状態 | Obsolete | 有効 |
| Product Type | Ultra-low-input-bias-current instrumentation amplifier | — |
| Input Bias Current at 25°C | 3 fA typical | — |
| Input Bias Current at 85°C | 25 fA typical | — |
| Gain Range | 1 to 1000 | 1 V/V to 1000 V/V (single external resistor) |
| Gain Setting Method | 1 external resistor | — |
| Internal Topology | 3-op-amp instrumentation amplifier | — |
| Input Stage | Monolithic FET input | — |
| Bandwidth | 800 kHz -3 dB | 800 kHz |
| Slew Rate | 0.8 V/µs | — |
| Number of Circuits | 1 circuit | — |
| Differential Input | Yes | — |
| Input Guarding | Special input guarding techniques | — |
| パッケージ | 16-pin SOIC | 16-SOIC (0.295 in, 7.50 mm width) |
| Package Code | UA | — |
| 実装タイプ | Surface mount | Surface Mount |
| Temperature Grade | Industrial | — |
| Amplifier Type | Standard general-purpose instrumentation amplifier | Instrumentation Amplifier |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | 9 V to 36 V total (dual or single supply) |
| 動作温度範囲 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Common-Mode Input Range | [DATA_NEEDED: common-mode input voltage range] | — |
| 出力電圧範囲 | [DATA_NEEDED: output voltage range] | — |
| RoHS ステータス | [DATA_NEEDED: RoHS compliance] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance] | — |
| Number of Channels | — | 1 |
| Input Bias Current | — | 3 fA typ at 25C |
| Input Bias Current at 85C | — | 25 fA |
| Input Offset Voltage | — | 2 mV max |
| Input Voltage Noise | — | 28 nV/sqrt(Hz) at 1 kHz |
| 静止電流 | — | 1 mA |
| Input Topology | — | Difet FET inputs with buffered guard drive |
| Guard Drive Pins | — | Yes (buffered, adjacent to both inputs) |
| Input Overvoltage Protection | — | Yes (internal) |