INA116UAG4 vs INA116UA तुलना

विस्तृत दोनों ओर की तुलना INA116UAG4 द्वारा Texas Instruments और INA116UA द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Texas Instruments
INA116UA INA116UA - 3fA Ultra-Low Bias In-Amp SOIC-16 | Texas Instruments

INA116UA - 3fA Ultra-Low Bias In-Amp SOIC-16 | Texas Instruments

INA116UA ✓ सक्रिय

विशेषता तुलना

पैरामीटर INA116UAG4 INA116UA
ब्रांड Texas Instruments Texas Instruments
श्रेणी Amplifier ICs Amplifier ICs
लाइफसाइकिल स्थिति Obsolete सक्रिय
Product Type Ultra-low-input-bias-current instrumentation amplifier —
Input Bias Current at 25°C 3 fA typical —
Input Bias Current at 85°C 25 fA typical —
Gain Range 1 to 1000 1 V/V to 1000 V/V (single external resistor)
Gain Setting Method 1 external resistor —
Internal Topology 3-op-amp instrumentation amplifier —
Input Stage Monolithic FET input —
Bandwidth 800 kHz -3 dB 800 kHz
Slew Rate 0.8 V/µs —
Number of Circuits 1 circuit —
Differential Input Yes —
Input Guarding Special input guarding techniques —
पैकेज 16-pin SOIC 16-SOIC (0.295 in, 7.50 mm width)
Package Code UA —
माउंटिंग प्रकार Surface mount Surface Mount
Temperature Grade Industrial —
Amplifier Type Standard general-purpose instrumentation amplifier Instrumentation Amplifier
Supply Voltage Range [DATA_NEEDED: supply voltage range] 9 V to 36 V total (dual or single supply)
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Common-Mode Input Range [DATA_NEEDED: common-mode input voltage range] —
आउटपुट वोल्टेज रेंज [DATA_NEEDED: output voltage range] —
RoHS स्थिति [DATA_NEEDED: RoHS compliance] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH compliance] —
Number of Channels — 1
Input Bias Current — 3 fA typ at 25C
Input Bias Current at 85C — 25 fA
Input Offset Voltage — 2 mV max
Input Voltage Noise — 28 nV/sqrt(Hz) at 1 kHz
क्वाइसेंट करंट — 1 mA
Input Topology — Difet FET inputs with buffered guard drive
Guard Drive Pins — Yes (buffered, adjacent to both inputs)
Input Overvoltage Protection — Yes (internal)

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध