INA116UAG4 vs INA116UA So sánh
So sánh chi tiết song song của INA116UAG4 bằng Texas Instruments và INA116UA bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Texas Instruments
INA116UAG4 - 3 fA Input Bias Instrumentation Amplifier | Texas Instruments
INA116UAG4 ObsoleteTexas Instruments
INA116UA - 3fA Ultra-Low Bias In-Amp SOIC-16 | Texas Instruments
INA116UA ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | INA116UAG4 | INA116UA |
|---|---|---|
| Thương hiệu | Texas Instruments | Texas Instruments |
| Danh mục | Amplifier ICs | Amplifier ICs |
| Trạng thái vòng đời | Obsolete | Hoạt động |
| Product Type | Ultra-low-input-bias-current instrumentation amplifier | — |
| Input Bias Current at 25°C | 3 fA typical | — |
| Input Bias Current at 85°C | 25 fA typical | — |
| Gain Range | 1 to 1000 | 1 V/V to 1000 V/V (single external resistor) |
| Gain Setting Method | 1 external resistor | — |
| Internal Topology | 3-op-amp instrumentation amplifier | — |
| Input Stage | Monolithic FET input | — |
| Bandwidth | 800 kHz -3 dB | 800 kHz |
| Slew Rate | 0.8 V/µs | — |
| Number of Circuits | 1 circuit | — |
| Differential Input | Yes | — |
| Input Guarding | Special input guarding techniques | — |
| Hộp | 16-pin SOIC | 16-SOIC (0.295 in, 7.50 mm width) |
| Package Code | UA | — |
| Kiểu lắp đặt | Surface mount | Surface Mount |
| Temperature Grade | Industrial | — |
| Amplifier Type | Standard general-purpose instrumentation amplifier | Instrumentation Amplifier |
| Supply Voltage Range | [DATA_NEEDED: supply voltage range] | 9 V to 36 V total (dual or single supply) |
| Khoảng nhiệt độ hoạt động | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Common-Mode Input Range | [DATA_NEEDED: common-mode input voltage range] | — |
| Khoảng điện áp đầu ra | [DATA_NEEDED: output voltage range] | — |
| Trạng thái RoHS | [DATA_NEEDED: RoHS compliance] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH compliance] | — |
| Number of Channels | — | 1 |
| Input Bias Current | — | 3 fA typ at 25C |
| Input Bias Current at 85C | — | 25 fA |
| Input Offset Voltage | — | 2 mV max |
| Input Voltage Noise | — | 28 nV/sqrt(Hz) at 1 kHz |
| Điện áp yên tĩnh | — | 1 mA |
| Input Topology | — | Difet FET inputs with buffered guard drive |
| Guard Drive Pins | — | Yes (buffered, adjacent to both inputs) |
| Input Overvoltage Protection | — | Yes (internal) |