ITS4035SEPDXUMA1 vs BTS70402EPGXUMA1 So sánh

So sánh chi tiết song song của ITS4035SEPDXUMA1 bằng Infineon và BTS70402EPGXUMA1 bằng Infineon. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Infineon
ITS4035SEPDXUMA1 ITS4035SEPDXUMA1 - 35mΩ Smart High-Side Switch 13.2A | Infineon

ITS4035SEPDXUMA1 - 35mΩ Smart High-Side Switch 13.2A | Infineon

ITS4035SEPDXUMA1 ✓ Hoạt động
Infineon
BTS70402EPGXUMA1 BTS70402EPGXUMA1 - 4-Channel Smart High-Side Switch | Infineon

BTS70402EPGXUMA1 - 4-Channel Smart High-Side Switch | Infineon

BTS70402EPGXUMA1 ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số ITS4035SEPDXUMA1 BTS70402EPGXUMA1
Thương hiệu Infineon Infineon
Danh mục Power MOSFET Drivers Power MOSFET Drivers
Trạng thái vòng đời Hoạt động Hoạt động
Switch Type Single-channel Smart High-Side Power Switch —
Cấu trúc 1:1 N-Channel MOSFET —
RDS(ON) (typical) 35 mΩ at 25 °C —
Continuous Output Current 13.2 A —
Current Limit (programmable) 3 A to 13.2 A —
Operating Supply Voltage (Vbb) 5 V to 28 V —
Logic-Level Input (IN) Active high, CMOS/TTL compatible —
Status Output (ST) Open-drain diagnostic flag —
Protection Features Overcurrent, Overtemperature, Short-Circuit, Overvoltage, Ground-Loss, Reverse Polarity Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection
Khoảng nhiệt độ hoạt động -40 °C to +150 °C -40 °C to +150 °C junction
Hộp PG-TSDSO-14 (Exposed Pad) PG-TSDSO-14 (exposed thermal pad)
Kiểu lắp đặt Surface Mount Surface Mount
Family PROFET™ Industrial —
Cấp MSL [DATA_NEEDED: MSL level] —
Trạng thái RoHS Compliant —
Manufacturer — Infineon Technologies
Part Family — PROFET+2 (BTS70xxx series)
Chức năng — Smart High-Side Power Switch
Number of Channels — 4
Cấu hình đầu ra — High-side, N-channel MOSFET
Continuous Load Current per Channel — 3.5 A (typical)
On-State Resistance (Ron) per Channel — 65 mOhm typical
Operating Voltage Range — 6 V to 18 V nominal (load-dump tolerant to 40 V)
Logic Supply Voltage — 3.3 V / 5 V compatible MCU I/O
Diagnostic Interface — SPI status register, current-sense feedback
AEC-Q100 Qualification — Qualified (automotive grade)
RoHS Compliance — Compliant

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá