ITS4035SEPDXUMA1 vs BTS70402EPGXUMA1 तुलना

विस्तृत दोनों ओर की तुलना ITS4035SEPDXUMA1 द्वारा Infineon और BTS70402EPGXUMA1 द्वारा Infineon. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Infineon
ITS4035SEPDXUMA1 ITS4035SEPDXUMA1 - 35mΩ Smart High-Side Switch 13.2A | Infineon

ITS4035SEPDXUMA1 - 35mΩ Smart High-Side Switch 13.2A | Infineon

ITS4035SEPDXUMA1 ✓ सक्रिय
Infineon
BTS70402EPGXUMA1 BTS70402EPGXUMA1 - 4-Channel Smart High-Side Switch | Infineon

BTS70402EPGXUMA1 - 4-Channel Smart High-Side Switch | Infineon

BTS70402EPGXUMA1 ✓ सक्रिय

विशेषता तुलना

पैरामीटर ITS4035SEPDXUMA1 BTS70402EPGXUMA1
ब्रांड Infineon Infineon
श्रेणी Power MOSFET Drivers Power MOSFET Drivers
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Switch Type Single-channel Smart High-Side Power Switch —
टोपोलॉजी 1:1 N-Channel MOSFET —
RDS(ON) (typical) 35 mΩ at 25 °C —
Continuous Output Current 13.2 A —
Current Limit (programmable) 3 A to 13.2 A —
Operating Supply Voltage (Vbb) 5 V to 28 V —
Logic-Level Input (IN) Active high, CMOS/TTL compatible —
Status Output (ST) Open-drain diagnostic flag —
Protection Features Overcurrent, Overtemperature, Short-Circuit, Overvoltage, Ground-Loss, Reverse Polarity Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection
ऑपरेटिंग तापमान रेंज -40 °C to +150 °C -40 °C to +150 °C junction
पैकेज PG-TSDSO-14 (Exposed Pad) PG-TSDSO-14 (exposed thermal pad)
माउंटिंग प्रकार Surface Mount Surface Mount
Family PROFET™ Industrial —
MSL स्तर [DATA_NEEDED: MSL level] —
RoHS स्थिति Compliant —
Manufacturer — Infineon Technologies
Part Family — PROFET+2 (BTS70xxx series)
फ़ंक्शन — Smart High-Side Power Switch
Number of Channels — 4
आउटपुट कॉन्फ़िगरेशन — High-side, N-channel MOSFET
Continuous Load Current per Channel — 3.5 A (typical)
On-State Resistance (Ron) per Channel — 65 mOhm typical
Operating Voltage Range — 6 V to 18 V nominal (load-dump tolerant to 40 V)
Logic Supply Voltage — 3.3 V / 5 V compatible MCU I/O
Diagnostic Interface — SPI status register, current-sense feedback
AEC-Q100 Qualification — Qualified (automotive grade)
RoHS Compliance — Compliant

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध