MPX10DP vs MPXV10GC7U Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci MPX10DP disebabkan oleh STMicroelectronics dan MPXV10GC7U disebabkan oleh NXP Semiconductors. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
STMicroelectronics
MPX10DP - 10kPa Differential Pressure Sensor 35mV | STMicroelectronics
MPX10DP ✓ Aktif
Pengandingan Spesifikasi
| Parametr | MPX10DP | MPXV10GC7U |
|---|---|---|
| Merek | STMicroelectronics | NXP Semiconductors |
| Kategori | Pressure Sensors | Pressure Sensors |
| Status Lingkungan Hidup | Aktif | Aktif |
| Pressure Type | Differential | Vented Gauge |
| Operating Pressure Range | 0 kPa to 10 kPa (0 to 1.45 PSI) | 0 kPa to 10 kPa (0 PSI to 1.45 PSI) |
| Maximum Overload Pressure | [DATA_NEEDED: maximum overload pressure] | — |
| Jenis Output | Analog Wheatstone bridge (uncompensated) | Analog Wheatstone Bridge (uncompensated mV) |
| Output Voltage Span | 0 mV to 35 mV at 3 V excitation | — |
| Supply Voltage (Excitation) | 3 V DC typical | — |
| Port Configuration | Dual male 0.19 in (4.93 mm) tube, axial | — |
| Kemasan / Case | 4-SIP Module | — |
| Jenis Pemasangan | Through-Hole | Through-Hole |
| Suhu Operasi | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Bridge Impedance | [DATA_NEEDED: input/output bridge resistance] | — |
| Linearity | [DATA_NEEDED: linearity %FS] | — |
| Temperature Compensation | None (uncompensated) | — |
| Status RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance] |
| Media Compatibility | Dry gases (non-corrosive) | Dry non-corrosive gases (reference port vented to ambient) |
| Maximum Overpressure | — | [DATA_NEEDED: maximum overpressure rating] |
| Full-Scale Output | — | 0 mV to 35 mV at 3 V supply |
| Sensitivity | — | 3.5 mV/kPa nominal |
| Tegangan Pemberi Arus | — | 3 V to 6 V (3 V typical excitation) |
| Arus Pemberi Arus | — | [DATA_NEEDED: supply current] |
| Input Impedance | — | [DATA_NEEDED: bridge input impedance] |
| Output Impedance | — | [DATA_NEEDED: bridge output impedance] |
| Port Style | — | Top port, 0.13" (3.18 mm) tube inlet |
| Kemasan | — | 8-DIP (0.550", 13.97 mm) through-hole |
| Compensation | — | None on chip - external calibration required |