MPX10DP vs MPXV10GC7U Ikinahambing

Detalyadong pagkakahiwalay na pagkakahambing ng MPX10DP sa pamamagitan ng STMicroelectronics at MPXV10GC7U sa pamamagitan ng NXP Semiconductors. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.

NXP Semiconductors
MPXV10GC7U MPXV10GC7U - 10 kPa Vented Gauge Pressure Sensor | NXP

MPXV10GC7U - 10 kPa Vented Gauge Pressure Sensor | NXP

MPXV10GC7U ✓ Nakahanda

Pagsanggunian na paghahambing

Parametro MPX10DP MPXV10GC7U
Brand STMicroelectronics NXP Semiconductors
Kategorya Pressure Sensors Pressure Sensors
Katayuan ng Lifecycle Aktibo Aktibo
Pressure Type Differential Vented Gauge
Operating Pressure Range 0 kPa to 10 kPa (0 to 1.45 PSI) 0 kPa to 10 kPa (0 PSI to 1.45 PSI)
Maximum Overload Pressure [DATA_NEEDED: maximum overload pressure] —
Type ng Output Analog Wheatstone bridge (uncompensated) Analog Wheatstone Bridge (uncompensated mV)
Output Voltage Span 0 mV to 35 mV at 3 V excitation —
Supply Voltage (Excitation) 3 V DC typical —
Port Configuration Dual male 0.19 in (4.93 mm) tube, axial —
Packhaging / Kaso 4-SIP Module —
Uri ng Pagpapasok Through-Hole Through-Hole
Temperature na Operasyon [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Bridge Impedance [DATA_NEEDED: input/output bridge resistance] —
Linearity [DATA_NEEDED: linearity %FS] —
Temperature Compensation None (uncompensated) —
Tindminan RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS compliance]
Media Compatibility Dry gases (non-corrosive) Dry non-corrosive gases (reference port vented to ambient)
Maximum Overpressure — [DATA_NEEDED: maximum overpressure rating]
Full-Scale Output — 0 mV to 35 mV at 3 V supply
Sensitivity — 3.5 mV/kPa nominal
Volte ng Pagbibigay — 3 V to 6 V (3 V typical excitation)
Kuru-kuryente ng Pagbibigay — [DATA_NEEDED: supply current]
Input Impedance — [DATA_NEEDED: bridge input impedance]
Output Impedance — [DATA_NEEDED: bridge output impedance]
Port Style — Top port, 0.13" (3.18 mm) tube inlet
Packhaging — 8-DIP (0.550", 13.97 mm) through-hole
Compensation — None on chip - external calibration required

Mga Datasheets at Resources

Tingnan ang Lahat ng mga Produkto Lumikha ng BOM Hilingin ang Kita