MPX10DP vs MPXV10GC7U तुलना

विस्तृत दोनों ओर की तुलना MPX10DP द्वारा STMicroelectronics और MPXV10GC7U द्वारा NXP Semiconductors. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

STMicroelectronics
MPX10DP MPX10DP - 10kPa Differential Pressure Sensor 35mV | STMicroelectronics

MPX10DP - 10kPa Differential Pressure Sensor 35mV | STMicroelectronics

MPX10DP ✓ सक्रिय
NXP Semiconductors
MPXV10GC7U MPXV10GC7U - 10 kPa Vented Gauge Pressure Sensor | NXP

MPXV10GC7U - 10 kPa Vented Gauge Pressure Sensor | NXP

MPXV10GC7U ✓ सक्रिय

विशेषता तुलना

पैरामीटर MPX10DP MPXV10GC7U
ब्रांड STMicroelectronics NXP Semiconductors
श्रेणी Pressure Sensors Pressure Sensors
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Pressure Type Differential Vented Gauge
Operating Pressure Range 0 kPa to 10 kPa (0 to 1.45 PSI) 0 kPa to 10 kPa (0 PSI to 1.45 PSI)
Maximum Overload Pressure [DATA_NEEDED: maximum overload pressure] —
आउटपुट प्रकार Analog Wheatstone bridge (uncompensated) Analog Wheatstone Bridge (uncompensated mV)
Output Voltage Span 0 mV to 35 mV at 3 V excitation —
Supply Voltage (Excitation) 3 V DC typical —
Port Configuration Dual male 0.19 in (4.93 mm) tube, axial —
पैकेज / केस 4-SIP Module —
माउंटिंग प्रकार Through-Hole Through-Hole
ऑपरेटिंग तापमान [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Bridge Impedance [DATA_NEEDED: input/output bridge resistance] —
Linearity [DATA_NEEDED: linearity %FS] —
Temperature Compensation None (uncompensated) —
RoHS स्थिति [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS compliance]
Media Compatibility Dry gases (non-corrosive) Dry non-corrosive gases (reference port vented to ambient)
Maximum Overpressure — [DATA_NEEDED: maximum overpressure rating]
Full-Scale Output — 0 mV to 35 mV at 3 V supply
Sensitivity — 3.5 mV/kPa nominal
सप्लाई वोल्टेज — 3 V to 6 V (3 V typical excitation)
सप्लाई करंट — [DATA_NEEDED: supply current]
Input Impedance — [DATA_NEEDED: bridge input impedance]
Output Impedance — [DATA_NEEDED: bridge output impedance]
Port Style — Top port, 0.13" (3.18 mm) tube inlet
पैकेज — 8-DIP (0.550", 13.97 mm) through-hole
Compensation — None on chip - external calibration required

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध