MPX10DP vs MPXV10GC7U Karşılaştırma
Ayrıntılı yan yana karşılaştırma MPX10DP tarafından STMicroelectronics ve MPXV10GC7U tarafından NXP SemiconductorsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
STMicroelectronics
MPX10DP - 10kPa Differential Pressure Sensor 35mV | STMicroelectronics
MPX10DP ✓ Aktif
Özellik Karşılaştırması
| Parametre | MPX10DP | MPXV10GC7U |
|---|---|---|
| Marka | STMicroelectronics | NXP Semiconductors |
| Kategori | Pressure Sensors | Pressure Sensors |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Pressure Type | Differential | Vented Gauge |
| Operating Pressure Range | 0 kPa to 10 kPa (0 to 1.45 PSI) | 0 kPa to 10 kPa (0 PSI to 1.45 PSI) |
| Maximum Overload Pressure | [DATA_NEEDED: maximum overload pressure] | — |
| Çıkış Türü | Analog Wheatstone bridge (uncompensated) | Analog Wheatstone Bridge (uncompensated mV) |
| Output Voltage Span | 0 mV to 35 mV at 3 V excitation | — |
| Supply Voltage (Excitation) | 3 V DC typical | — |
| Port Configuration | Dual male 0.19 in (4.93 mm) tube, axial | — |
| Paket / Kas | 4-SIP Module | — |
| Montaj Türü | Through-Hole | Through-Hole |
| İşletim Sıcaklığı | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Bridge Impedance | [DATA_NEEDED: input/output bridge resistance] | — |
| Linearity | [DATA_NEEDED: linearity %FS] | — |
| Temperature Compensation | None (uncompensated) | — |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS compliance] |
| Media Compatibility | Dry gases (non-corrosive) | Dry non-corrosive gases (reference port vented to ambient) |
| Maximum Overpressure | — | [DATA_NEEDED: maximum overpressure rating] |
| Full-Scale Output | — | 0 mV to 35 mV at 3 V supply |
| Sensitivity | — | 3.5 mV/kPa nominal |
| Besleme Gerilimi | — | 3 V to 6 V (3 V typical excitation) |
| Besleme Akımı | — | [DATA_NEEDED: supply current] |
| Input Impedance | — | [DATA_NEEDED: bridge input impedance] |
| Output Impedance | — | [DATA_NEEDED: bridge output impedance] |
| Port Style | — | Top port, 0.13" (3.18 mm) tube inlet |
| Paket | — | 8-DIP (0.550", 13.97 mm) through-hole |
| Compensation | — | None on chip - external calibration required |