MPXV2010DP vs MPX2010DP तुलना

विस्तृत दोनों ओर की तुलना MPXV2010DP द्वारा STMicroelectronics और MPX2010DP द्वारा NXP Semiconductors. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

STMicroelectronics
MPXV2010DP MPXV2010DP - 10kPa Differential Pressure Sensor, 8-BSOP | STMicroelectronics

MPXV2010DP - 10kPa Differential Pressure Sensor, 8-BSOP | STMicroelectronics

MPXV2010DP ✓ सक्रिय
NXP Semiconductors
MPX2010DP MPX2010DP - 10 kPa Differential Pressure Sensor | NXP/STMicro

MPX2010DP - 10 kPa Differential Pressure Sensor | NXP/STMicro

MPX2010DP ✓ सक्रिय

विशेषता तुलना

पैरामीटर MPXV2010DP MPX2010DP
ब्रांड STMicroelectronics NXP Semiconductors
श्रेणी Pressure Sensors Pressure Sensors
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Pressure Sensor (Piezoresistive, Differential) —
Operating Pressure Range 0 kPa to 10 kPa (0 PSI to 1.45 PSI) —
Pressure Type Differential —
आउटपुट प्रकार Analog, Ratiometric Analog voltage, Wheatstone bridge (mV level)
आउटपुट वोल्टेज रेंज 0 mV to 25 mV —
सप्लाई वोल्टेज 10 V nominal 10 V DC typical (max 16 V)
Port Style Dual Ports, Same Side (3.3 mm Tube Male) —
पैकेज 8-BSOP (0.475", 12.06 mm Width), Surface Mount —
ऑपरेटिंग तापमान 0 C to 85 C -40 °C to +125 °C
Calibration On-Chip, Laser-Trimmed —
Temperature Compensation On-Chip, 0 C to 85 C 0 °C to +85 °C (on-chip)
Output Impedance [DATA_NEEDED: typical output impedance per side, ohms] —
Hysteresis & Linearity [DATA_NEEDED: %FSS linearity and %FSS hysteresis] —
Response Time / Bandwidth [DATA_NEEDED: response time or bandwidth] —
माउंटिंग प्रकार Surface Mount —
RoHS स्थिति Compliant Compliant
MSL स्तर [DATA_NEEDED: moisture sensitivity level] —
सेंसर प्रकार — Differential Pressure Sensor
Pressure Range — 0 to 10 kPa (0 to 1.45 PSI)
Technology — Piezoresistive (silicon strain gauge bridge)
Typical Full-Scale Span — 25 mV at 10 V excitation
Zero Pressure Offset — 0 mV nominally (±1.0 mV max)
Linearity — ±0.05% (typ)
Response Time — 1.0 ms (typical)
Maximum Overpressure — 75 kPa
Burst Pressure — 200 kPa
Port Configuration — Dual ports (differential), 0.19 inch / 4.93 mm tubes
Package / Mounting — 4-SIP Module (through-hole with axial tubes)
Media Compatibility — Dry air or non-corrosive gas

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध