MPXV2010DP vs MPX2010DP So sánh

So sánh chi tiết song song của MPXV2010DP bằng STMicroelectronics và MPX2010DP bằng NXP Semiconductors. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

STMicroelectronics
MPXV2010DP MPXV2010DP - 10kPa Differential Pressure Sensor, 8-BSOP | STMicroelectronics

MPXV2010DP - 10kPa Differential Pressure Sensor, 8-BSOP | STMicroelectronics

MPXV2010DP ✓ Hoạt động
NXP Semiconductors
MPX2010DP MPX2010DP - 10 kPa Differential Pressure Sensor | NXP/STMicro

MPX2010DP - 10 kPa Differential Pressure Sensor | NXP/STMicro

MPX2010DP ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số MPXV2010DP MPX2010DP
Thương hiệu STMicroelectronics NXP Semiconductors
Danh mục Pressure Sensors Pressure Sensors
Trạng thái vòng đời Hoạt động Hoạt động
Product Type Pressure Sensor (Piezoresistive, Differential) —
Operating Pressure Range 0 kPa to 10 kPa (0 PSI to 1.45 PSI) —
Pressure Type Differential —
Kiểu đầu ra Analog, Ratiometric Analog voltage, Wheatstone bridge (mV level)
Khoảng điện áp đầu ra 0 mV to 25 mV —
Điện áp cung cấp 10 V nominal 10 V DC typical (max 16 V)
Port Style Dual Ports, Same Side (3.3 mm Tube Male) —
Hộp 8-BSOP (0.475", 12.06 mm Width), Surface Mount —
Nhiệt độ hoạt động 0 C to 85 C -40 °C to +125 °C
Calibration On-Chip, Laser-Trimmed —
Temperature Compensation On-Chip, 0 C to 85 C 0 °C to +85 °C (on-chip)
Output Impedance [DATA_NEEDED: typical output impedance per side, ohms] —
Hysteresis & Linearity [DATA_NEEDED: %FSS linearity and %FSS hysteresis] —
Response Time / Bandwidth [DATA_NEEDED: response time or bandwidth] —
Kiểu lắp đặt Surface Mount —
Trạng thái RoHS Compliant Compliant
Cấp MSL [DATA_NEEDED: moisture sensitivity level] —
Kiểu cảm biến — Differential Pressure Sensor
Pressure Range — 0 to 10 kPa (0 to 1.45 PSI)
Technology — Piezoresistive (silicon strain gauge bridge)
Typical Full-Scale Span — 25 mV at 10 V excitation
Zero Pressure Offset — 0 mV nominally (±1.0 mV max)
Linearity — ±0.05% (typ)
Response Time — 1.0 ms (typical)
Maximum Overpressure — 75 kPa
Burst Pressure — 200 kPa
Port Configuration — Dual ports (differential), 0.19 inch / 4.93 mm tubes
Package / Mounting — 4-SIP Module (through-hole with axial tubes)
Media Compatibility — Dry air or non-corrosive gas

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá