MPXV2010DP vs MPX2010DP Karşılaştırma
Ayrıntılı yan yana karşılaştırma MPXV2010DP tarafından STMicroelectronics ve MPX2010DP tarafından NXP SemiconductorsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
STMicroelectronics
MPXV2010DP - 10kPa Differential Pressure Sensor, 8-BSOP | STMicroelectronics
MPXV2010DP ✓ Aktif
Özellik Karşılaştırması
| Parametre | MPXV2010DP | MPX2010DP |
|---|---|---|
| Marka | STMicroelectronics | NXP Semiconductors |
| Kategori | Pressure Sensors | Pressure Sensors |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Product Type | Pressure Sensor (Piezoresistive, Differential) | — |
| Operating Pressure Range | 0 kPa to 10 kPa (0 PSI to 1.45 PSI) | — |
| Pressure Type | Differential | — |
| Çıkış Türü | Analog, Ratiometric | Analog voltage, Wheatstone bridge (mV level) |
| Çıkış Gerilimi Aralığı | 0 mV to 25 mV | — |
| Besleme Gerilimi | 10 V nominal | 10 V DC typical (max 16 V) |
| Port Style | Dual Ports, Same Side (3.3 mm Tube Male) | — |
| Paket | 8-BSOP (0.475", 12.06 mm Width), Surface Mount | — |
| İşletim Sıcaklığı | 0 C to 85 C | -40 °C to +125 °C |
| Calibration | On-Chip, Laser-Trimmed | — |
| Temperature Compensation | On-Chip, 0 C to 85 C | 0 °C to +85 °C (on-chip) |
| Output Impedance | [DATA_NEEDED: typical output impedance per side, ohms] | — |
| Hysteresis & Linearity | [DATA_NEEDED: %FSS linearity and %FSS hysteresis] | — |
| Response Time / Bandwidth | [DATA_NEEDED: response time or bandwidth] | — |
| Montaj Türü | Surface Mount | — |
| RoHS Durumu | Compliant | Compliant |
| MSL Seviyesi | [DATA_NEEDED: moisture sensitivity level] | — |
| Duyarlılık Türü | — | Differential Pressure Sensor |
| Pressure Range | — | 0 to 10 kPa (0 to 1.45 PSI) |
| Technology | — | Piezoresistive (silicon strain gauge bridge) |
| Typical Full-Scale Span | — | 25 mV at 10 V excitation |
| Zero Pressure Offset | — | 0 mV nominally (±1.0 mV max) |
| Linearity | — | ±0.05% (typ) |
| Response Time | — | 1.0 ms (typical) |
| Maximum Overpressure | — | 75 kPa |
| Burst Pressure | — | 200 kPa |
| Port Configuration | — | Dual ports (differential), 0.19 inch / 4.93 mm tubes |
| Package / Mounting | — | 4-SIP Module (through-hole with axial tubes) |
| Media Compatibility | — | Dry air or non-corrosive gas |