MW7IC2220NBR1 vs MW7IC2240NBR1 Comparison
Detailed side-by-side comparison of MW7IC2220NBR1 by NXP Semiconductors and MW7IC2240NBR1 by NXP Semiconductors. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
NXP Semiconductors
MW7IC2220NBR1 - 2W W-CDMA RF Power Amplifier 2.11-2.17 GHz | NXP
MW7IC2220NBR1 ✓ Active
Specification Comparison
| Parameter | MW7IC2220NBR1 | MW7IC2240NBR1 |
|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors |
| Category | RF Amplifiers | RF Amplifiers |
| Lifecycle Status | Active | Obsolete |
| Stock Status | In Stock | In Stock |
| Unit Price (USD) | $21.50 | $29.00 |
| Technology | RF LDMOS (Laterally Diffused MOSFET) | RF LDMOS (multi-stage integrated) |
| Function | W-CDMA Wideband Integrated Power Amplifier | — |
| Frequency Range | 2000 MHz to 2200 MHz (usable), 2110-2170 MHz (W-CDMA band) | 2110 MHz to 2170 MHz (usable 2000-2200 MHz) |
| Operating Frequency (typical) | 2167.5 MHz | — |
| Average Output Power | 2 W (33 dBm) | — |
| Drain Supply Voltage (VDD) | 28 V (24 V to 32 V operating range) | — |
| Small-Signal Gain | 31 dB (typical at 2.17 GHz) | — |
| Quiescent Current Stage 1 (IDQ1) | 80 mA | 90 mA |
| Quiescent Current Stage 2 (IDQ2) | 300 mA | 420 mA |
| Package Type | TO-272WB-16 (over-molded plastic) | — |
| Input Matching | On-chip (50 ohm nominal) | — |
| Output Matching | On-chip (50 ohm nominal) | — |
| Characteristic Impedance | 50 ohm | — |
| Maximum Operating Temperature | 150 C | — |
| Mounting Type | Surface Mount (flange/over-molded) | Surface Mount |
| Modulation Support | W-CDMA, TD-SCDMA, LTE, multi-carrier | — |
| Test Signal | Single-Carrier W-CDMA, IQ Magnitude Clipping, PAR = 7.5 dB | — |
| ACPR Measurement | 3.84 MHz channel bandwidth at +/-5 MHz offset | — |
| Modulation / RF Type | — | W-CDMA (also TD-SCDMA, LTE) |
| Output Power (Average) | — | 4 W Avg. @ 2112.5 MHz, single-carrier W-CDMA |
| Supply Voltage (VDD) | — | 28 V (rated 24 V to 32 V operation) |
| Minimum Gain | — | 15 dB (typical 30 dB) |
| Input VSWR | — | 5:1 |
| Output VSWR | — | 5:1 |
| Nominal Impedance | — | 50 ohm (on-chip matched) |
| P1dB (Output) | — | 46 dBm (per distributor listing) |
| Package | — | TO-272 WB-16 (over-molded plastic, 16-lead) |
| Terminal Finish | — | Matte Tin (Sn) |
| Package Body Material | — | Plastic / Epoxy |
| Operating Mode | — | 100% PAR tested for W-CDMA-like signals |
| RoHS Status | — | [DATA_NEEDED: RoHS compliance] |