MW7IC2220NBR1 vs MW7IC2240NBR1 对比
详细并排对比 MW7IC2220NBR1 出自 NXP Semiconductors 和 MW7IC2240NBR1 出自 NXP Semiconductors。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况，以确定最适合您设计需求的元器件。
NXP Semiconductors
MW7IC2220NBR1 - 2W W-CDMA RF Power Amplifier 2.11-2.17 GHz | NXP
MW7IC2220NBR1 ✓ 量产中
规格对比
| 参数 | MW7IC2220NBR1 | MW7IC2240NBR1 |
|---|---|---|
| 品牌 | NXP Semiconductors | NXP Semiconductors |
| 分类 | RF Amplifiers | RF Amplifiers |
| 生命周期状态 | 有效 | Obsolete |
| 库存状态 | 有库存 | 有库存 |
| 单价（USD） | $21.50 | $29.00 |
| Technology | RF LDMOS (Laterally Diffused MOSFET) | RF LDMOS (multi-stage integrated) |
| 功能 | W-CDMA Wideband Integrated Power Amplifier | — |
| Frequency Range | 2000 MHz to 2200 MHz (usable), 2110-2170 MHz (W-CDMA band) | 2110 MHz to 2170 MHz (usable 2000-2200 MHz) |
| Operating Frequency (typical) | 2167.5 MHz | — |
| Average Output Power | 2 W (33 dBm) | — |
| Drain Supply Voltage (VDD) | 28 V (24 V to 32 V operating range) | — |
| Small-Signal Gain | 31 dB (typical at 2.17 GHz) | — |
| Quiescent Current Stage 1 (IDQ1) | 80 mA | 90 mA |
| Quiescent Current Stage 2 (IDQ2) | 300 mA | 420 mA |
| Package Type | TO-272WB-16 (over-molded plastic) | — |
| Input Matching | On-chip (50 ohm nominal) | — |
| Output Matching | On-chip (50 ohm nominal) | — |
| Characteristic Impedance | 50 ohm | — |
| Maximum Operating Temperature | 150 C | — |
| 安装类型 | Surface Mount (flange/over-molded) | Surface Mount |
| Modulation Support | W-CDMA, TD-SCDMA, LTE, multi-carrier | — |
| Test Signal | Single-Carrier W-CDMA, IQ Magnitude Clipping, PAR = 7.5 dB | — |
| ACPR Measurement | 3.84 MHz channel bandwidth at +/-5 MHz offset | — |
| Modulation / RF Type | — | W-CDMA (also TD-SCDMA, LTE) |
| Output Power (Average) | — | 4 W Avg. @ 2112.5 MHz, single-carrier W-CDMA |
| Supply Voltage (VDD) | — | 28 V (rated 24 V to 32 V operation) |
| Minimum Gain | — | 15 dB (typical 30 dB) |
| Input VSWR | — | 5:1 |
| Output VSWR | — | 5:1 |
| Nominal Impedance | — | 50 ohm (on-chip matched) |
| P1dB (Output) | — | 46 dBm (per distributor listing) |
| 封装 | — | TO-272 WB-16 (over-molded plastic, 16-lead) |
| Terminal Finish | — | Matte Tin (Sn) |
| Package Body Material | — | Plastic / Epoxy |
| Operating Mode | — | 100% PAR tested for W-CDMA-like signals |
| RoHS 状态 | — | [DATA_NEEDED: RoHS compliance] |