SN65HVD52D vs SN65HVD37D Comparison
Detailed side-by-side comparison of SN65HVD52D by Texas Instruments and SN65HVD37D by Texas Instruments. Compare key specifications, electrical parameters, packaging, lifecycle status, pricing, and availability to determine the best component for your design requirements.
Texas Instruments
SN65HVD52D - 1 Mbps Full-Duplex RS-485 Transceiver | Texas Instruments
SN65HVD52D ✓ ActiveTexas Instruments
SN65HVD37D - 3.3V Full-Duplex RS-485 Transceiver | TI (Tape & Reel)
SN65HVD37D ✓ ActiveSpecification Comparison
| Parameter | SN65HVD52D | SN65HVD37D |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Category | Interface ICs | Interface ICs |
| Lifecycle Status | Active | Active |
| Product Type | RS-485 / RS-422 full-duplex transceiver | — |
| Driver / Receiver Count | 1 driver and 1 receiver | — |
| Data Rate | 1 Mbps | — |
| Supply Voltage | 5 V | — |
| Maximum Supply Voltage | 5.5 V | — |
| Operating Temperature | -40 C to +85 C | -40 C to +85 C |
| Package | 8-pin SOIC (D) | 14-SOIC (D), 0.154" / 3.90 mm width |
| Mounting Type | Surface mount | Surface Mount |
| Driver Configuration | Full-duplex | — |
| Bus Standard | RS-485 and RS-422 | — |
| Unit Load | 1/8 unit-load option | — |
| Maximum Bus Nodes | Up to 256 nodes | — |
| Bus-Pin ESD Protection | Exceeds 15 kV HBM | — |
| Standby Current | 1 uA | — |
| Maximum Transmit Delay | 230 ns | — |
| Maximum Supply Current | 8 mA | — |
| Interface Standard | EIA-485-A | — |
| RoHS Status | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Device Type | — | Transceiver (1 driver / 1 receiver) |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1 / 1 |
| Duplex | — | Full |
| Supply Voltage (VCC) | — | 3 V to 3.6 V (nominal 3.3 V) |
| Signaling Rate | — | Up to 25 Mbps |
| Receiver Unit Load | — | 1/8 unit load (up to 256 nodes) |
| Bus-Pin ESD Protection (HBM) | — | >15 kV HBM |
| Receiver Hysteresis | — | 60 mV (typical) |
| Quiescent Current (active) | — | 1 mA (typical) |
| Standby / Shutdown Current | — | <1 uA (typical) |
| RoHS / Lead-Free | — | RoHS compliant, lead-free (per TI product page) |
| Fail-Safe Receiver | — | Yes (idle/open/short safe) |
| Driver / Receiver Enable | — | Independent DE and RE pins |