SN65HVD52D vs SN65HVD37D 비교

다음의 상세 나란히 비교: SN65HVD52D 제조: Texas Instruments 및 SN65HVD37D 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

사양 비교

파라미터 SN65HVD52D SN65HVD37D
브랜드 Texas Instruments Texas Instruments
카테고리 Interface ICs Interface ICs
수명 주기 상태 활성 활성
Product Type RS-485 / RS-422 full-duplex transceiver —
Driver / Receiver Count 1 driver and 1 receiver —
데이터 속도 1 Mbps —
공급 전압 5 V —
Maximum Supply Voltage 5.5 V —
동작 온도 -40 C to +85 C -40 C to +85 C
패키지 8-pin SOIC (D) 14-SOIC (D), 0.154" / 3.90 mm width
실장 유형 Surface mount Surface Mount
Driver Configuration Full-duplex —
Bus Standard RS-485 and RS-422 —
Unit Load 1/8 unit-load option —
Maximum Bus Nodes Up to 256 nodes —
Bus-Pin ESD Protection Exceeds 15 kV HBM —
Standby Current 1 uA —
Maximum Transmit Delay 230 ns —
Maximum Supply Current 8 mA —
Interface Standard EIA-485-A —
RoHS 상태 [DATA_NEEDED: RoHS compliance status] —
REACH Status [DATA_NEEDED: REACH compliance status] —
AEC-Q100 Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Device Type — Transceiver (1 driver / 1 receiver)
Protocol — RS-422, RS-485
Number of Drivers/Receivers — 1 / 1
Duplex — Full
Supply Voltage (VCC) — 3 V to 3.6 V (nominal 3.3 V)
Signaling Rate — Up to 25 Mbps
Receiver Unit Load — 1/8 unit load (up to 256 nodes)
Bus-Pin ESD Protection (HBM) — >15 kV HBM
Receiver Hysteresis — 60 mV (typical)
Quiescent Current (active) — 1 mA (typical)
Standby / Shutdown Current — <1 uA (typical)
RoHS / Lead-Free — RoHS compliant, lead-free (per TI product page)
Fail-Safe Receiver — Yes (idle/open/short safe)
Driver / Receiver Enable — Independent DE and RE pins

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청