SN65HVD52D vs SN65HVD37D তুলনা
. বিস্তৃত সাথে-সাথে তুলনা SN65HVD52D নির্দিষ্ট Texas Instruments ও SN65HVD37D নির্দিষ্ট Texas Instruments. প্রধান বিশেষত্ব, বৈদ্যুতিক প্রাকৃতিক, প্যাকেজিং, জীবনচক্র অবস্থা, মূল্যাঙ্কন, ও পরিসীমা কোন অপশনটির কেন্দ্রীয় নির্ধারণ করুন
Texas Instruments
SN65HVD52D - 1 Mbps Full-Duplex RS-485 Transceiver | Texas Instruments
SN65HVD52D ✓ সক্রিয়Texas Instruments
SN65HVD37D - 3.3V Full-Duplex RS-485 Transceiver | TI (Tape & Reel)
SN65HVD37D ✓ সক্রিয়বিশিষ্টতা তুলনা
| পারামিটার | SN65HVD52D | SN65HVD37D |
|---|---|---|
| ব্র্যান্ড | Texas Instruments | Texas Instruments |
| ক্যাটাগরি | Interface ICs | Interface ICs |
| লাইফসাইকেল স্ট্যাটাস | সক্রিয় | সক্রিয় |
| Product Type | RS-485 / RS-422 full-duplex transceiver | — |
| Driver / Receiver Count | 1 driver and 1 receiver | — |
| ডেটা রেট | 1 Mbps | — |
| সাপ্লাই ভোল্টেজ | 5 V | — |
| Maximum Supply Voltage | 5.5 V | — |
| অপারেটিং তাপমাত্রা | -40 C to +85 C | -40 C to +85 C |
| প্যাকেজ | 8-pin SOIC (D) | 14-SOIC (D), 0.154" / 3.90 mm width |
| মাউন্টিং টাইপ | Surface mount | Surface Mount |
| Driver Configuration | Full-duplex | — |
| Bus Standard | RS-485 and RS-422 | — |
| Unit Load | 1/8 unit-load option | — |
| Maximum Bus Nodes | Up to 256 nodes | — |
| Bus-Pin ESD Protection | Exceeds 15 kV HBM | — |
| Standby Current | 1 uA | — |
| Maximum Transmit Delay | 230 ns | — |
| Maximum Supply Current | 8 mA | — |
| Interface Standard | EIA-485-A | — |
| RoHS স্ট্যাটাস | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Device Type | — | Transceiver (1 driver / 1 receiver) |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1 / 1 |
| Duplex | — | Full |
| Supply Voltage (VCC) | — | 3 V to 3.6 V (nominal 3.3 V) |
| Signaling Rate | — | Up to 25 Mbps |
| Receiver Unit Load | — | 1/8 unit load (up to 256 nodes) |
| Bus-Pin ESD Protection (HBM) | — | >15 kV HBM |
| Receiver Hysteresis | — | 60 mV (typical) |
| Quiescent Current (active) | — | 1 mA (typical) |
| Standby / Shutdown Current | — | <1 uA (typical) |
| RoHS / Lead-Free | — | RoHS compliant, lead-free (per TI product page) |
| Fail-Safe Receiver | — | Yes (idle/open/short safe) |
| Driver / Receiver Enable | — | Independent DE and RE pins |