SN65HVD52D vs SN65HVD37D Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci SN65HVD52D disebabkan oleh Texas Instruments dan SN65HVD37D disebabkan oleh Texas Instruments. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Texas Instruments
SN65HVD52D - 1 Mbps Full-Duplex RS-485 Transceiver | Texas Instruments
SN65HVD52D ✓ AktifTexas Instruments
SN65HVD37D - 3.3V Full-Duplex RS-485 Transceiver | TI (Tape & Reel)
SN65HVD37D ✓ AktifPengandingan Spesifikasi
| Parametr | SN65HVD52D | SN65HVD37D |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Product Type | RS-485 / RS-422 full-duplex transceiver | — |
| Driver / Receiver Count | 1 driver and 1 receiver | — |
| Kadar Data | 1 Mbps | — |
| Tegangan Pemberi Arus | 5 V | — |
| Maximum Supply Voltage | 5.5 V | — |
| Suhu Operasi | -40 C to +85 C | -40 C to +85 C |
| Kemasan | 8-pin SOIC (D) | 14-SOIC (D), 0.154" / 3.90 mm width |
| Jenis Pemasangan | Surface mount | Surface Mount |
| Driver Configuration | Full-duplex | — |
| Bus Standard | RS-485 and RS-422 | — |
| Unit Load | 1/8 unit-load option | — |
| Maximum Bus Nodes | Up to 256 nodes | — |
| Bus-Pin ESD Protection | Exceeds 15 kV HBM | — |
| Standby Current | 1 uA | — |
| Maximum Transmit Delay | 230 ns | — |
| Maximum Supply Current | 8 mA | — |
| Interface Standard | EIA-485-A | — |
| Status RoHS | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Device Type | — | Transceiver (1 driver / 1 receiver) |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1 / 1 |
| Duplex | — | Full |
| Supply Voltage (VCC) | — | 3 V to 3.6 V (nominal 3.3 V) |
| Signaling Rate | — | Up to 25 Mbps |
| Receiver Unit Load | — | 1/8 unit load (up to 256 nodes) |
| Bus-Pin ESD Protection (HBM) | — | >15 kV HBM |
| Receiver Hysteresis | — | 60 mV (typical) |
| Quiescent Current (active) | — | 1 mA (typical) |
| Standby / Shutdown Current | — | <1 uA (typical) |
| RoHS / Lead-Free | — | RoHS compliant, lead-free (per TI product page) |
| Fail-Safe Receiver | — | Yes (idle/open/short safe) |
| Driver / Receiver Enable | — | Independent DE and RE pins |