SN65HVD52D vs SN65HVD37D 比較
詳細並排比較 SN65HVD52D 由 Texas Instruments 與 SN65HVD37D 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
Texas Instruments
SN65HVD52D - 1 Mbps Full-Duplex RS-485 Transceiver | Texas Instruments
SN65HVD52D ✓ 啟用中Texas Instruments
SN65HVD37D - 3.3V Full-Duplex RS-485 Transceiver | TI (Tape & Reel)
SN65HVD37D ✓ 啟用中規格比較
| 參數 | SN65HVD52D | SN65HVD37D |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 類別 | Interface ICs | Interface ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Product Type | RS-485 / RS-422 full-duplex transceiver | — |
| Driver / Receiver Count | 1 driver and 1 receiver | — |
| 資料速率 | 1 Mbps | — |
| 供應電壓 | 5 V | — |
| Maximum Supply Voltage | 5.5 V | — |
| 工作溫度 | -40 C to +85 C | -40 C to +85 C |
| 封裝 | 8-pin SOIC (D) | 14-SOIC (D), 0.154" / 3.90 mm width |
| 安裝類型 | Surface mount | Surface Mount |
| Driver Configuration | Full-duplex | — |
| Bus Standard | RS-485 and RS-422 | — |
| Unit Load | 1/8 unit-load option | — |
| Maximum Bus Nodes | Up to 256 nodes | — |
| Bus-Pin ESD Protection | Exceeds 15 kV HBM | — |
| Standby Current | 1 uA | — |
| Maximum Transmit Delay | 230 ns | — |
| Maximum Supply Current | 8 mA | — |
| Interface Standard | EIA-485-A | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS compliance status] | — |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Device Type | — | Transceiver (1 driver / 1 receiver) |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1 / 1 |
| Duplex | — | Full |
| Supply Voltage (VCC) | — | 3 V to 3.6 V (nominal 3.3 V) |
| Signaling Rate | — | Up to 25 Mbps |
| Receiver Unit Load | — | 1/8 unit load (up to 256 nodes) |
| Bus-Pin ESD Protection (HBM) | — | >15 kV HBM |
| Receiver Hysteresis | — | 60 mV (typical) |
| Quiescent Current (active) | — | 1 mA (typical) |
| Standby / Shutdown Current | — | <1 uA (typical) |
| RoHS / Lead-Free | — | RoHS compliant, lead-free (per TI product page) |
| Fail-Safe Receiver | — | Yes (idle/open/short safe) |
| Driver / Receiver Enable | — | Independent DE and RE pins |