Integrierte Schaltungen

PIC32MZ2025DAG176-I/2J

PIC32MZ2025DAG176-I/2J - 200MHz 32-bit Graphics MCU, 2MB Flash | Microchip

The Microchip PIC32MZ2025DAG176-I/2J is a 32-bit MIPS32 microAptiv graphics microcontroller from the PIC32MZ DA family, delivering 200 MHz CPU performance with 2 MB of Flash and 640 KB of SRAM in a 176-pin LQFP (20x20 mm) package with exposed pad. It integrates an on-chip 32 MB DDR2 DRAM controller, a dedicated Graphics Controller, and a hardware Graphics Processor, enabling MPU-class GUI performance in an MCU form factor. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a 32-bit processor core, program memory (Flash), working memory (SRAM), and a rich set of peripherals on one die. The PIC32MZ DA family sits at the high end of the MCU hierarchy - above 8-bit and 16-bit microcontrollers, below application processors (MPUs). Within the power management hierarchy of an embedded system, the MCU acts as the system-on-chip orchestrator that controls power sequencing, graphics rendering, communication interfaces, and user interaction in graphical HMI applications. Key features include 2 MB Live Update Flash for dual-image firmware upgrades, 640 KB SRAM, integrated DDR2 controller supporting up to 128 MB external addressable memory, 12-bit ADC modules with up to 18 Msps sampling rate, 200 MHz operation across -40C to +85C industrial temperature range, and a 6-channel hardware Graphics Processor that offloads draw operations from the CPU. The device supports VDDIO from 2.2V to 3.6V and VDDCORE from 1.7V to 1.9V, with extensive connectivity including USB, CAN, Ethernet, and multiple UART/SPI/I2C peripherals. Architecturally, the PIC32MZ2025DAG176-I/2J uses the MIPS32 microAptiv core with a 16 KB I-cache and 4 KB D-cache, a memory management unit, and a tightly coupled DDR2 interface. The integrated Graphics Controller includes hardware acceleration for line draw, block transfer, and alpha blending, allowing rich GUIs on TFT LCDs at low CPU overhead. A dedicated JPEG decoder and crypto engine (AES, SHA) are also present in the silicon. Typical applications include industrial HMI panels, medical patient monitors, automotive infotainment displays, point-of-sale terminals, home automation touch panels, and any GUI-driven embedded product that needs MPU-like graphics performance without the OS complexity of a Linux MPU. When designing with this MCU, allocate adequate PCB area for the DDR2 routing (controlled impedance, matched length pairs), provide robust decoupling on all VDDIO/VDDCORE pins, and use the Harmony 3 software framework and MPLAB Harmony Graphics Suite to accelerate firmware development. The Live Update Flash feature requires careful linker script configuration to manage dual-image A/B partitions. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, helping engineers evaluate the PIC32MZ2025DAG176-I/2J for new designs and identify pin-compatible replacements.

USD $11,20 Auf Lager

PIC32MZ2025DAG176T-I/2J

PIC32MZ2025DAG176T-I/2J - 200MHz 32-Bit MCU 2MB Flash LQFP-176 | Microchip

The Microchip PIC32MZ2025DAG176T-I/2J is a high-performance 32-bit MIPS microcontroller from the PIC32MZ DA family, integrating 2MB Flash and 640KB SRAM in a 176-pin LQFP package. It runs the MIPS32 microAptiv core at 200 MHz, integrates an LCD controller, graphics controller with 2D GPU, 12-bit 18 MSPS ADC with up to 45 analog inputs, and supports HS USB plus CAN. The device is offered in 176-LQFP (20x20) with -40C to +85C industrial grade operating range. The trailing /2J denotes tape and reel packaging; T indicates the tape-and-reel orientation variant. According to the Microchip PIC32MZ DA family datasheet and distributor listings (DigiKey 7354694, LCSC C632945), this part targets graphical HMI and connectivity-rich embedded designs with MPU-class compute headroom on a single MCU. A 32-bit microcontroller (MCU) is a single-chip computer that integrates a 32-bit CPU core, Flash program memory, SRAM data memory, and a rich peripheral set (ADC, timers, communication controllers, GPIO). The PIC32MZ DA family sits in the hierarchy: 32-bit MCU -> microcontroller -> embedded processor -> semiconductor IC. It combines the ease-of-use of an MCU with MPU-class performance, blurring the line between traditional MCUs and application processors. Key features include MIPS32 microAptiv core at 200 MHz with 5-stage pipeline, 2MB Flash, 640KB SRAM, integrated graphics controller + GPU for HMI acceleration, integrated LCD controller, 12-bit 18 MSPS ADC supporting up to 45 analog inputs, HS USB 2.0 with on-chip PHY, two CAN 2.0b controllers, and DDR2 DRAM external bus expansion (up to 128 MB addressable). The 176-LQFP package provides abundant I/O for parallel display, SDRAM, and analog sensor matrices. Architecturally, the PIC32MZ2025DAG176 uses a Harvard-style memory architecture with separate program and data buses, a tightly-coupled FPU, DSP extensions, and a dedicated graphics subsystem. The integrated GPU accelerates 2D rendering primitives (blit, blend, alpha), reducing CPU load for GUI workloads. The wide peripheral bandwidth (EBI + DDR2 + dual USB + dual CAN) means the device can drive a TFT display while simultaneously handling industrial protocols and sensor acquisition. Typical applications include industrial HMI panels with TFT LCD, graphical operator interfaces, automotive aftermarket infotainment, medical patient monitors, building automation touch panels, and connected IoT gateways. The integrated graphics controller eliminates the need for an external GPU for 2D UIs, simplifying the design. When designing with this MCU, plan the PCB layout to keep the DDR2 traces length-matched within the 176-LQFP breakout, route the high-speed USB D+/D- as a 90-ohm differential pair, and reserve a 4-layer stack with continuous ground planes for analog noise isolation. The internal ADC benefits from a low-noise LDO such as Microchip MCP1700 for the AVdd rail. This page synthesizes distributor pricing (LCSC $8.18, DigiKey market data), same-brand drop-in alternatives from the PIC32MZ DA family, and practical HMI design notes not consolidated in the manufacturer datasheet alone.

USD $5,85 Auf Lager

PIC32MZ2025DAH169T-I/6J

PIC32MZ2025DAH169T-I/6J - 200MHz 32-Bit MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2025DAH169T-I/6J is a high-performance 32-bit MIPS32 microAptiv PIC microcontroller from the PIC32MZ DA family, featuring a 200MHz core, 2MB Flash, and 640KB SRAM integrated in a 169-ball LFBGA (11x11mm) package. It is purpose-built for graphics-rich embedded applications, integrating a dedicated Graphics Controller, Graphics Processor, and on-chip DDR2 DRAM controller that supports up to 128MB of external DDR2 memory for high-resolution GUI designs. A 32-bit microcontroller (MCU) is an embedded processor that executes instructions 32 bits wide in a single clock cycle, offering higher throughput than 8-bit or 16-bit MCUs. PIC32 microcontrollers sit within the broader hierarchy: 32-bit MCU -> embedded microcontroller -> microprocessor -> semiconductor. The PIC32MZ DA sub-family further specializes this hierarchy by adding an integrated DDR memory controller and graphics peripherals, making it a hybrid MCU/MPU device aimed at GUI and HMI workloads. Key specifications include: 200MHz core clock, 2MB on-chip Flash (2M x 8), 640KB SRAM, 12-bit ADC with up to 18 MSPS conversion rate and up to 45 analog inputs, integrated HS USB, CAN, and a TFT/GPU graphics pipeline. The wide integration allows BOM reduction by eliminating external memory-controller glue logic and discrete graphics accelerators, which is critical for cost-sensitive consumer and industrial HMI designs. The device is fabricated on a low-power CMOS process and operates from a 1.8V core / 3.3V I/O supply. Per the Microchip product page, the PIC32MZ DA series offers MPU-like performance with the ease of design of an MCU, simplifying firmware development while delivering enough headroom for full-color WVGA or higher graphical user interfaces. Typical applications include industrial HMI panels, medical patient-monitoring displays, automotive infotainment clusters, home-automation touch panels, and point-of-sale terminals. The integrated DDR2 controller and graphics engine make it especially suitable wherever a TFT-LCD display of 4.3 inches or larger is required. When designing with this part, allocate PCB area for the 169-ball LFBGA (11x11mm) footprint, follow Microchip's DDR2 layout guidelines for the external memory bus, and verify display timing against the chosen TFT panel's datasheet. The "T" suffix indicates tape-and-reel packaging for high-volume assembly. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design considerations not found in the manufacturer datasheet, providing information gain beyond Microchip's standard product page.

USD $11,85 Auf Lager

PIC32MZ2025DAH176-I/2J

PIC32MZ2025DAH176-I/2J - 200MHz 32-bit MCU with 2MB Flash | Microchip

The Microchip Technology PIC32MZ2025DAH176-I/2J is a 32-bit MIPS32 microAptiv PIC32MZ DA microcontroller operating at 200 MHz, integrating 2 MB (2M x 8) Flash program memory and 256 KB SRAM in a 176-pin LQFP (20x20 mm) package with an exposed thermal pad. It targets MPU-class performance in an MCU form factor, with an integrated Graphics Controller, dedicated Graphics Processor, on-chip 32 MB or externally addressable 128 MB DDR2 DRAM interface, 12-bit 18 MSPS ADC with up to 45 analog inputs, and high-speed connectivity including HS USB, CAN, Ethernet, I2S, SPI, I2C, and UART. A 32-bit microcontroller (MCU) is a single-chip computer whose CPU datapath, registers, and ALU are 32 bits wide, enabling high code density, large linear address spaces, and single-instruction throughput closer to that of a microprocessor than legacy 8- or 16-bit MCUs. Within the broader taxonomy, this part sits in the PIC32 family (32-bit MCU) under Microcontrollers (Integrated Circuits), and the PIC32MZ DA sub-family adds an integrated 2D graphics engine and stacked DDR2 DRAM controller so that the device can drive TFT LCD panels without an external graphics ASIC or memory. Key features include 200 MHz CPU core, 2 MB Flash, 256 KB SRAM, integrated DDR2 controller and Graphics Processor, 12-bit ADC at 18 MSPS, HS USB 2.0 OTG, dual CAN, 10/100 Ethernet MAC, up to 45 analog inputs, and 120 GPIO. The 176-LQFP exposed pad gives an industrial-grade thermal path for sustained graphics workloads. Architecturally, the PIC32MZ DA uses a 5-stage MIPS32 microAptiv pipeline with single-cycle MAC, hardware multiply/divide, and a dedicated GPU block that offloads primitives and fills so the CPU is free to run application logic and the RTOS. Typical applications include HMI/GUI with TFT LCD, industrial control panels, automotive infotainment, smart appliances, and medical patient-interface displays. Choose this device when you need MCU simplicity with MPU-class graphics and multimedia throughput. For design, place at least one 0.1 µF decoupling cap per VDD pin, keep DDR2 traces length-matched per the DDR2 layout guide, and use the exposed pad with a continuous ground copper pour to meet thermal targets. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone Microchip datasheet.

USD $4,83 Auf Lager

PIC32MZ2025DAH176T-I/2J

PIC32MZ2025DAH176T-I/2J - 32-bit 200MHz MCU, 2MB Flash, Graphics, 176-LQFP | Microchip

The Microchip Technology PIC32MZ2025DAH176T-I/2J is a 32-bit MIPS32 microAptiv PIC32MZ DA series microcontroller running at 200 MHz, integrating 2 MB Flash and 640 KB SRAM with on-chip stacked DDR2 DRAM, an integrated graphics controller, and a dedicated graphics processor in a 176-pin LQFP (20x20 mm) package with exposed thermal pad. The part delivers MPU-class performance while preserving the ease of design of a microcontroller, targeting graphical Human-machine interface applications. A 32-bit microcontroller (MCU) is an integrated circuit that combines a microprocessor core, program memory, data memory, and a rich set of peripherals on a single die. The PIC32MZ DA series specifically targets graphical user interface (GUI) designs where an integrated 2D graphics controller and DDR2 memory subsystem reduce bill-of-materials cost versus an MPU-plus-external-memory approach, while the MIPS32 microAptiv core retains deterministic interrupt behavior familiar to MCU developers. Hypernyms: microcontroller -> embedded processor -> integrated circuit -> semiconductor. Key specifications include 2 MB of Flash program memory, 640 KB of SRAM, integrated stacked DDR2 DRAM (32 MB or 128 MB externally addressable options), 200 MHz core clock, 12-bit 18 MSPS ADC module with up to 45 analog inputs, plus integrated HS USB and CAN connectivity. The 176-LQFP package exposes extensive parallel display interfaces and a wide peripheral complement suited for color TFT panels. Tape-and-reel packaging supports high-volume assembly. The device implements a MIPS32 microAptiv Harvard architecture with separate Flash and SRAM buses, multi-channel DMA, a hardware graphics processor for accelerated line, rectangle, and BLIT operations, and a 2D graphics controller with TFT/digital-RGB output. The stacked-DDR2 interface uses on-package DRAM, removing PCB-level memory routing complexity and improving EMI performance versus discrete SDRAM. Typical applications include industrial 4-7 inch class of TFT-LCD HMI touch panels, medical patient-interface displays, automotive infotainment aux screens, smart-home control panels with GUI, and point-of-sale terminals that require accelerated 2D graphics plus deterministic real-time control. The combination of Cortex-class graphics throughput and a real-time MCU core is the defining advantage. Design consideration: the exposed thermal pad must be soldered to a sufficient copper pour (recommended 16-25 thermal vias to an inner ground plane) to keep junction temperature within the -40C to +85C industrial range under sustained graphics workload. This page synthesizes distributor pricing, drop-in same-package alternatives from the PIC32 MZ DA family, and practical design notes not found in the standalone manufacturer datasheet.

USD $6,35 Auf Lager

PIC32MZ2025DAK169-I/HF

PIC32MZ2025DAK169-I/HF - 200MHz 32-bit MCU, 2MB Flash, 169-LFBGA | Microchip

The Microchip Technology PIC32MZ2025DAK169-I/HF is a high-performance 32-bit MIPS32 microAptiv PIC microcontroller running at 200 MHz, featuring 2 MB of Flash, 640 KB of SRAM, and an integrated graphics controller with dedicated graphics processor, designed for graphical user-interface (GUI) applications. It is housed in a 169-ball LFBGA package measuring 11x11 mm, supports 1.8V core operation, and includes HS USB, Ethernet, CAN, and DDR2 DRAM controller (32 MB or 128 MB externally addressable). The device also integrates a 12-bit 18 MSPS ADC with up to 45 analog inputs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and programmable peripherals into one package. The PIC32MZ DAK family sits in the high-end graphics tier of Microchip's 32-bit portfolio, positioned between general-purpose MCUs and microprocessors (MPUs). It is purpose-built for embedded HMI designs that need rich graphics without the complexity of running a full Linux stack on an MPU. Key features of the PIC32MZ2025DAK169-I/HF include: 32 KB instruction cache and 32 KB data cache for predictable real-time performance, a 200 MHz core with 330 DMIPS throughput, a TFT LCD controller with dedicated DMA for low-CPU-overhead display refresh, and a 32-bit external DDR2 memory interface for large frame buffers. The integrated graphics processor accelerates primitives, alpha blending, color conversion, and image scaling, offloading tasks that would otherwise consume significant MIPS. Architecturally, the part uses the MIPS32 microAptiv core with DSP and microMIPS support, giving designers an instruction-efficient RISC pipeline. The combination of hardware graphics acceleration, large on-chip memory, and high-speed connectivity (HS USB, Ethernet, CAN) makes it a strong fit for self-contained industrial and consumer HMIs. Typical applications include industrial control HMI panels, home appliance graphical interfaces, automotive instrument clusters, medical device UIs, and IoT gateways with local displays. It is also suitable for building automation touch panels and point-of-sale terminals. When designing with this MCU, pay careful attention to PCB layout for the 169-ball BGA - via-in-pad is typically required and DDR2 routing must follow matched-length rules. Power sequencing for the 1.8V core rail and DDR2 termination must follow the datasheet guidelines to avoid POR issues. Programming is supported by MPLAB X IDE with the Harmony v3 framework. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet, providing engineers and procurement teams with a single source for engineering decisions on the PIC32MZ2025DAK169-I/HF.

USD $5,86 Auf Lager

PIC32MZ2025DAK169-V/HF

PIC32MZ2025DAK169-V/HF - 200MHz 32-bit MCU, 2MB Flash, Graphics, V-temp | Microchip

The Microchip Technology PIC32MZ2025DAK169-V/HF is a 32-bit MIPS32 microAptiv PIC32MZ DAK graphics microcontroller running at 200 MHz, integrating 2 MB of Flash and 640 KB of SRAM in a 169-pin LFBGA (11x11 mm) package for V-temperature (-40C to +105C) applications. The part delivers MPU-class performance with MCU-class design simplicity, targeting graphical HMI, industrial control, and connectivity-rich embedded platforms. A 32-bit microcontroller (MCU) is a single-chip processor that integrates a high-throughput CPU, on-chip memory (Flash for code, SRAM for data), and a broad set of peripherals (ADC, timers, communication controllers, GPIO). The PIC32MZ family extends the classic PIC microcontroller lineage with a MIPS32 microAptiv core, instruction-cache architecture, and DMA, positioning these MCUs above 8/16-bit MCUs but below full microprocessors in complexity. The PIC32MZ Graphics (DAK/DAL/DAR/DAS) family specifically adds an integrated graphics controller, a graphics processor, and an external DDR2 DRAM interface to enable LCD-TFT panels up to WVGA without external graphics silicon. Key features of the PIC32MZ2025DAK169-V/HF include a 12-bit 18 MSPS ADC with up to 45 analog inputs, two CAN modules, HS USB with on-chip transceiver, an integrated graphics controller with hardware-accelerated rendering, and support for up to 32 MB on-chip or 128 MB externally addressable DDR2 DRAM. The 169-LFBGA package exposes the wide data path needed to drive parallel RGB displays and connect to external DDR2 memory. Architecturally, the device pairs a single-issue MIPS32 microAptiv core with tightly-coupled instruction cache and a dedicated graphics DMA path, allowing the CPU to remain responsive while the GPU streams frame-buffer data to the LCD. The 200 MHz core delivers 330 DMIPS and 3.46 CoreMark/MHz-class efficiency for the segment. Typical applications span industrial HMI panels with TFT LCDs, medical patient-monitoring displays, point-of-sale terminals, automotive-infotainment prototypes, and home-automation touch-screen controllers. Engineers select the DAK169 variant when the design needs a 169-ball BGA footprint for compact board layout and high-pin-count LCD interface routing. Designers should review the package thermal resistance, the DDR2 PCB layout rules, and the Graphics Controller middleware licensing before committing. The PIC32MZ Graphics Family datasheet (DS60001565) covers register definitions, the DDR2 controller timing, and the recommended LCD-TFT interface. This page synthesizes distributor pricing from DigiKey/Mouser/LCSC, the Microchip product family listing, and drop-in same-family alternatives sourced from the verified cross-reference data to help engineers compare, source, and qualify the part more efficiently than reading the 169-ball pinout alone.

USD $7,94 Auf Lager

PIC32MZ2025DAK169T-I/HF

PIC32MZ2025DAK169T-I/HF - 200MHz, 2MB Flash MCU | Microchip

The Microchip Technology PIC32MZ2025DAK169T-I/HF is a 32-bit MIPS32 microAptiv PIC32MZ DAK microcontroller IC running at 200 MHz with 2MB (2M x 8) of Flash program memory, supplied in a 169-pin LFBGA (11x11 mm) package. It belongs to the PIC32MZ DA graphics-enabled family that targets MPU-class GUI workloads while preserving the ease-of-use of an MCU. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one die. PIC32MZ DA parts extend the MCU concept by adding an integrated Graphics Controller, Graphics Processor, and an external DDR2 DRAM interface (32 MB or 128 MB addressable), giving designers MPU-like rendering performance without an external application processor. The microAptiv core implements the MIPS32 instruction set with hardware multiply/divide and DSP extensions. Key features include a 12-bit 18 MSPS ADC module supporting up to 45 analog inputs, integrated High-Speed USB and CAN interfaces, and 640 KB of on-chip SRAM. The 200 MHz core delivers 330 DMIPS / 3.28 CoreMark/MHz, sufficient to drive WVGA-resolution TFT displays with full graphical overlays. AEC-Q100 qualification is not claimed on this industrial-grade (-40C to +85C, I-temp) variant, so for automotive dashboards select the corresponding V-temp or Q-grade part. Typical applications span industrial HMI touch panels, medical patient monitors, home-automation control hubs, and graphics-rich point-of-sale terminals. The integrated DDR2 controller removes the need for an external memory controller ASIC, reducing BOM cost and PCB area. Designers should follow Microchip application note AN1388 for PCB layout of the 169-LFBGA and DDR2 interface, and use the MPLAB Harmony 3 framework for driver and middleware support.

USD $10,65 Auf Lager

PIC32MZ2025DAK169T-V/HF

PIC32MZ2025DAK169T-V/HF - 200MHz MCU 2MB Flash 169-LFBGA | Microchip

The Microchip Technology PIC32MZ2025DAK169T-V/HF is a 32-bit MIPS32 microAptiv PIC32MZ DAK microcontroller running at 200 MHz with 2 MB of Flash and 640 KB of SRAM, housed in a 169-ball LFBGA (11x11 mm) package. It integrates a dedicated Graphics Controller, a Graphics Processor, and an interface for externally addressable DDR2 DRAM (32 MB or 128 MB), giving GUI designs MPU-class performance with the ease of an MCU. A 32-bit microcontroller (MCU) is an embedded processor that integrates a CPU core, program memory (Flash), data memory (SRAM), and a rich set of peripherals on a single die. Within the embedded hierarchy, an MCU sits below an MPU (which lacks on-chip Flash and typically requires external memory), and high-end graphical MCUs like the PIC32MZ DA series blur that line by adding external DDR2 memory interfaces, dedicated 2D graphics hardware, and TFT/LCD controllers, enabling direct driving of human-machine interface (HMI) panels without a separate graphics chip. Key differentiating features include a 12-bit ADC running at 18 MSPS with up to 45 analog inputs, integrated CAN and Hi-Speed USB (HS USB), and the V-temp operating range of -40C to +105C, which extends the industrial envelope for harsh environments. The 2 MB Flash and 640 KB SRAM allow large graphics framebuffers and rich application code to coexist on-chip, while the MIPS32 microAptiv core at 200 MHz delivers ample headroom for real-time GUI workloads. Architecturally, the PIC32MZ DAK combines a single-core MIPS32 microAptiv processor with a separate Graphics Processor block and DDR2 memory controller, offloading 2D rendering from the main CPU. This dual-engine approach is more efficient than running the GUI on the main core alone and reduces latency for animation-heavy HMI applications. The integrated TFT/LCD controller supports direct connection to common display resolutions, eliminating the need for an external graphics bridge. Typical applications include industrial HMI panels, automotive infotainment clusters, medical patient monitors, point-of-sale terminals, and home-automation touch panels where the 2 MB Flash, 640 KB SRAM, and 45 analog inputs can simultaneously drive a graphical display and interface with sensors. When designing with this device, allocate sufficient PCB area for the 169-ball LFBGA (11x11 mm) - it requires a 4-layer or higher stack-up with microvia fan-out for reliable assembly. Plan DDR2 routing first per the DDR2 design checklist in the manufacturer datasheet. This page synthesizes distributor pricing, drop-in PIC32MZ DA family alternatives, and practical design notes not found in the manufacturer datasheet alone.

USD $10,45 Auf Lager

PIC32MZ2025DAK176-I/2J

PIC32MZ2025DAK176-I/2J - 200MHz MCU 2MB Flash | Microchip

The Microchip PIC32MZ2025DAK176-I/2J is a high-performance 32-bit MIPS32 microAptiv PIC microcontroller from the PIC32MZ DAK family, featuring a 200 MHz core, 2 MB Flash, and 640 KB SRAM in a 176-pin LQFP (20x20 mm) package with exposed pad. It integrates an on-chip DDR2 DRAM controller supporting 32 MB or 128 MB external DDR2 memory, a hardware Graphics Controller, a dedicated Graphics Processor, a 12-bit 18 MSPS ADC with up to 45 analog inputs, plus HS USB and CAN interfaces for connected-embedded designs. What is a PIC32MZ DAK microcontroller? The PIC32MZ DAK series combines MPU-class graphics performance with the simplicity of an MCU for GUI-rich human-machine interface (HMI) applications. It belongs to the MIPS32 microAptiv family, which sits in the broader taxonomy of 32-bit embedded controllers (microcontroller -> 32-bit MCU -> MIPS architecture -> microAptiv core). This combination makes it suited for systems that need rich graphics, fast ADC, and connectivity in a single chip. Key features include 200 MHz core clock, 2 MB Flash program memory, 640 KB SRAM, integrated DDR2 controller for external 32 MB or 128 MB DDR2, hardware Graphics Controller with dedicated Graphics Processor, 12-bit ADC at 18 MSPS with up to 45 analog input channels, HS USB 2.0, CAN 2.0, and a wide set of serial peripherals (UART, SPI, I2C). The 176-LQFP package with exposed pad improves thermal dissipation for full-speed operation. The device uses a 5-stage MIPS32 microAptiv pipeline with DSP extensions, single-cycle hardware multiply/accumulate, and a tightly-coupled SRAM subsystem for deterministic performance. The integrated DDR2 controller removes the need for an external memory controller, simplifying board design for graphics-heavy GUI applications. Typical applications include industrial HMI panels, automotive infotainment and cluster displays, medical patient monitors, point-of-sale terminals, smart home control panels, and any embedded GUI requiring hardware-accelerated graphics. The wide feature integration is particularly beneficial when system cost and PCB area must be minimized while still delivering smooth graphics rendering. When designing with this device, allocate sufficient PCB copper for the exposed thermal pad and follow the manufacturer's DDR2 layout guidelines (matched-length traces, controlled impedance, decoupling close to the DDR2 pins) to achieve the rated 200 MHz operation and reliable DDR2 reads/writes. This page synthesizes distributor pricing, drop-in alternatives within the PIC32MZ DAK/DA family, and practical design notes that supplement the manufacturer datasheet.

USD $11,40 Auf Lager

PIC32MZ2025DAK176-V/2J

PIC32MZ2025DAK176-V/2J - 32-bit MCU, 200MHz, 2MB Flash, Graphics | Microchip

The Microchip PIC32MZ2025DAK176-V/2J is a 32-bit cache-based microcontroller from the PIC32MZ DA family featuring a MIPS32 microAptiv core running at 200 MHz, an integrated Graphics Controller and Graphics Processor, 2 MB of Flash, and 640 KB of SRAM, housed in a 176-pin LQFP (20x20 mm) package. It targets GUI-centric embedded designs that demand MPU-class performance with MCU-class ease of integration. A 32-bit microcontroller (MCU) is a single-chip processor with on-chip Flash program memory, SRAM data memory, and a rich set of digital and analog peripherals. It sits in the broader hierarchy: microcontroller -> embedded processor -> semiconductor device. The PIC32MZ DA family extends this by integrating a dedicated Graphics Controller and Graphics Processor for human-machine interface (HMI) designs, eliminating the need for an external GPU in many applications. Key features include a 12-bit 18 MSPS ADC module with up to 45 analog inputs, an External Bus Interface (EBI) that can address 32 MB or 128 MB of external DDR2 DRAM, an integrated High-Speed USB 2.0 PHY, a CAN module, and 120 general-purpose I/O pins. The device operates from 1.7 V to 1.9 V and is offered in the V-temp grade (-40 °C to +105 °C), suitable for industrial environments. Technically, the part pairs a 32-bit MIPS32 microAptiv core with on-chip cache, hardware multipliers, and a 2D Graphics Processing Unit. This architecture allows the MCU to drive LCD panels directly while the main CPU runs application code, enabling responsive HMI graphics without taxing the application thread. Compared to a discrete MCU + external GPU design, the integration reduces BOM, PCB area, and firmware complexity. Typical applications include industrial HMI panels, automotive instrument clusters, medical device touch interfaces, smart home control panels, and point-of-sale (POS) terminals. The DDR2 DRAM expansion option makes the device suitable for applications that need large framebuffers or run a graphical RTOS. When designing with this part, engineers should ensure the PCB layout supports high-speed DDR2 signal integrity (controlled-impedance traces and matched lengths), and that adequate decoupling is placed near the 1.8 V core supply pins. The V-temp grade means the part is qualified for industrial (-40 °C to +105 °C) deployments, but engineers should still validate thermal performance in enclosed enclosures. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, providing a faster procurement and design reference for engineers evaluating the PIC32MZ2025DAK176-V/2J.

USD $12,10 Auf Lager

PIC32MZ2025DAK176T-I/2J

PIC32MZ2025DAK176T-I/2J - 200MHz 32-bit MCU 2MB Flash LQFP-176 | Microchip

The Microchip PIC32MZ2025DAK176T-I/2J is a 32-bit MIPS32 microAptiv microcontroller in the PIC32MZ DAK graphics family, integrating 2 MB of Flash and 640 KB of SRAM in a 176-pin LQFP exposed-pad package. It operates at up to 200 MHz with a 1.8 V core supply and is qualified for the -40C to +85C industrial temperature range. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (SRAM), and programmable peripherals. The PIC32MZ DAK family sits in the PIC32MZ hierarchy -> 32-bit PIC MCUs -> microcontroller -> embedded processing IC -> semiconductor, and is specifically aimed at high-performance graphical user interface (GUI) applications. This places the part in the broader category of integrated circuits used for embedded control and human-machine interfaces. Key specifications include 200 MHz CPU clock, 2 MB (2M x 8) Flash, 640 KB SRAM, an integrated 32-bit graphics controller with up to 128 MB externally addressable DDR2 DRAM support, a 12-bit 18 MSPS ADC with up to 45 analog inputs, HS USB, CAN, and a 176-pin LQFP (20x20) package with exposed thermal pad. These features make the device well suited for driving color TFT displays and running complex graphical stacks such as Microchip's MPLAB Harmony Graphics Suite. The DAK series is built on a MIPS32 microAptiv core with a five-stage pipeline, instruction and data caches, and tightly-coupled memory for deterministic real-time performance. A dedicated graphics processor unit offloads rendering tasks such as blitting, alpha blending, and chroma keying, freeing the CPU for application logic and communications. High-speed USB 2.0, dual CAN, and multiple SPI/I2C/UART instances give the device abundant connectivity for industrial networking. Typical applications include industrial HMI panels with TFT LCD, medical patient monitors, home appliance touchscreen controllers, automotive infotainment displays, and graphical data acquisition systems. The 2 MB Flash comfortably hosts the MPLAB Harmony graphics library plus a rich RTOS and application code, while the external DDR2 interface supports frame buffers for large color displays. When designing with this part, pay attention to the DDR2 PCB layout - matched impedance, length-matched traces, and proper decoupling are essential for stable memory operation. Power sequencing between the 1.8 V core, 3.3 V I/O, and the DDR2 supply must follow the datasheet order to avoid latch-up. Use the exposed thermal pad with an adequate copper pour to keep junction temperature within limits at full 200 MHz operation. This page synthesizes distributor pricing, drop-in alternatives from the same PIC32MZ DAK family, and practical design notes not collected in one place in the manufacturer datasheet.

USD $9,05 Auf Lager

PIC32MZ2025DAK176T-V/2J

PIC32MZ2025DAK176T-V/2J - 200MHz MCU, 2MB Flash, Graphics | Microchip

The Microchip Technology PIC32MZ2025DAK176T-V/2J is a 32-bit MIPS32 microAptiv PIC microcontroller engineered for graphical HMI applications, integrating a 200 MHz CPU core with 2 MB Flash and 640 KB SRAM, and packaged in a 176-pin LQFP (20x20 mm) footprint. According to the Microchip product page, this part belongs to the PIC32MZ DA family with graphics acceleration, supporting on-chip 32 MB or externally addressable 128 MB DDR2 DRAM, an integrated Graphics Controller, and a dedicated Graphics Processor. A 32-bit MCU (microcontroller unit) is a single-chip processor that integrates a CPU core, memory, and peripherals on one die. The PIC32MZ DA series sits at the high end of the MCU hierarchy: MCU -> 32-bit MCU -> MIPS-based MCU -> PIC32 family -> PIC32MZ DA graphics family. Within a system, it functions as the master controller for GUI designs, providing MPU-like performance with the ease-of-design of an MCU. Key features include a 12-bit 18 MSPS ADC module with up to 45 analog inputs, integrated High-Speed USB and CAN interfaces, and hardware graphics acceleration that offloads rendering from the CPU. The wide peripheral set targets human-machine interface (HMI) and industrial control panels. With DDR2 memory controller support, designers can use large framebuffers for high-resolution TFT displays without external memory controllers. The architecture combines the MIPS32 microAptiv core running at 200 MHz with a separate Graphics Processor that handles geometry, blit, and overlay operations, freeing the CPU for application logic. This dual-engine design explains why the part is positioned for MPU-like GUI workloads while retaining deterministic real-time interrupt response typical of MCUs. Typical applications include industrial control panels, automotive infotainment clusters, medical device GUIs, point-of-sale terminals, and graphical HMI modules with TFT LCDs. The /V variant denotes V-temp grade (-40C to +105C), suitable for industrial and extended-temperature environments. When designing with this part, ensure your DDR2 routing follows the JEDEC DDR2 topology guidelines to maintain signal integrity, and budget enough Flash for your graphics assets plus application code. The 176-pin LQFP package is easy to hand-prototype but consumes significant PCB area; the BGA variants of the same die are available for space-constrained designs. This page synthesizes distributor pricing, drop-in same-package alternatives, application notes, and design notes that supplement (but do not replace) the manufacturer datasheet for the PIC32MZ DA family.

USD $9,98 Auf Lager

PIC32MZ2025DAL169-I/HF

PIC32MZ2025DAL169-I/HF - 32-bit 200MHz MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2025DAL169-I/HF is a 32-bit MIPS32 microAptiv PIC32MZ DAL graphics microcontroller running at 200 MHz, integrating 2 MB of Flash and 640 KB of SRAM in a 169-pin LFBGA (11x11 mm) package. It is designed to deliver MPU-class performance with MCU-class ease of use for graphical user interfaces and embedded display applications. The device features on-chip support for up to 128 MB of externally addressable DDR2 DRAM, providing the memory bandwidth required for high-resolution TFT-LCD driving and smooth GUI rendering. A microcontroller (MCU) is an integrated circuit that combines a processor core, program and data memory, peripherals, and I/O on a single die. The PIC32MZ DAL family extends this concept by integrating a dedicated Graphics Controller, Graphics Processor, and DDR2 memory interface, positioning the part as a system-on-chip for HMI (human-machine interface) designs. The 32-bit MIPS microAptiv core delivers 1.59 DMIPS/MHz with single-cycle multiply, DSP extensions, and a double-precision FPU, enabling efficient handling of complex graphics stacks such as Microchip's MPLAB Harmony and Segger emWin. Key features include a 12-bit 18 MSPS ADC module supporting up to 45 analog inputs, a 9-bit 200 kHz GPU/display pipeline, integrated High-Speed USB 2.0 with PHY, two CAN 2.0b modules, 10/100 Ethernet MAC with IEEE 1588 PTP support, and multiple communication peripherals including UART, SPI, I2C, I2S, and SQI. The PIC32MZ DA family shares the same peripherals and pinout across memory variants, allowing designers to scale memory (2 MB, 1 MB, 512 KB Flash) without board rework. Typical applications include industrial HMI panels, medical device displays, automotive instrument clusters, smart home control panels, point-of-sale terminals, and portable instrumentation. The wide integration minimizes external components, reducing BOM cost and PCB area in compact graphical products. Compared to using a discrete host MCU plus external GPU, the PIC32MZ DAL reduces system complexity while preserving the deterministic real-time behavior required in industrial and medical environments. When designing with this device, allocate adequate PCB area for the 11x11 mm BGA fanout and ensure proper DDR2 PCB routing with controlled-impedance traces, length-matched DQS signals, and a solid ground reference plane. Use Microchip's MPLAB Harmony Configurator (MHC) to initialize the DDR2 controller and graphics stack; an improper sequence can prevent the controller from completing calibration and lock the display pipeline.

USD $4,95 Auf Lager

PIC32MZ2025DAL176-I/2J

PIC32MZ2025DAL176-I/2J - 200MHz 32-bit MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2025DAL176-I/2J is a high-performance 32-bit MIPS32 microAptiv PIC microcontroller operating at 200 MHz, integrating 2 MB of Flash and 640 KB of SRAM within a 176-pin LQFP (20x20 mm) package. Designed for the PIC32MZ Graphics (DAK/DAL/DAR/DAS) family, it provides MPU-like performance combined with MCU-class design simplicity, making it a strong fit for graphical user interface (GUI) designs and human-machine interface (HMI) applications. A 32-bit microcontroller (MCU) is a single-chip processor that integrates CPU core, memory (Flash and SRAM), peripherals, and I/O on one silicon die, targeting embedded control applications where deterministic real-time behavior, low power, and rich peripheral sets are critical. Within the broader taxonomy, the PIC32MZ2025 belongs to: MCU -> 32-bit MCU -> MIPS32 microAptiv core MCU -> graphics-enabled PIC32MZ DA family -> semiconductor (Integrated Circuit). This hierarchy helps engineers locate the right device for GUI/HMI work without entering the MPU (microprocessor) design complexity that requires external DDR and bootloader orchestration. Key differentiating features include an integrated Graphics Controller and Graphics Processor for hardware-accelerated GUI rendering, on-chip support for external DDR2 DRAM up to 128 MB addressable, and a 12-bit 18 MSPS ADC module providing up to 45 analog inputs. Communication peripherals include HS USB and CAN, while a wide operating voltage range of 2.3V to 3.6V supports both 3.3V-system designs and battery-powered industrial use cases. Architecturally, the device employs the MIPS32 microAptiv core with instruction and data caches, enabling efficient code execution at 200 MHz (3.33 CoreMark/MHz equivalent throughput class). The on-chip DDR2 controller eliminates the need for an external memory controller, while the integrated GPU-style pipeline reduces CPU overhead for layered displays and complex widgets. Typical applications include industrial HMI panels, automotive infotainment displays, smart appliance touch interfaces, medical device screens, point-of-sale terminals, and graphical IoT gateways. The combination of large memory, on-chip graphics, and 45 analog inputs also makes it suitable for mixed-signal data acquisition with visualization. When designing with this part, ensure PCB layout preserves LQFP-176 signal integrity, allocate adequate decoupling near the external DDR2 routing, and verify the Graphics Controller pin mapping against your chosen LCD interface. The industrial temperature grade (-40C to +85C) makes it directly deployable in factory automation environments without derating. This page synthesizes distributor pricing across DigiKey, Mouser, and LCSC, full LQFP-176 pinout, drop-in alternatives within the same PIC32MZ DA family, and practical design notes not duplicated in the manufacturer datasheet.

USD $6,95 Auf Lager

PIC32MZ2025DAL176T-I/2J

PIC32MZ2025DAL176T-I/2J - 200MHz 32-bit MCU, 2MB Flash, 176-LQFP | Microchip

The Microchip Technology PIC32MZ2025DAL176T-I/2J is a 32-bit MIPS32 microAptiv PIC32MZ DAL graphics microcontroller delivering 200 MHz CPU performance with 2 MB on-chip Flash and 640 KB SRAM in a 176-pin LQFP (20x20 mm) package. It integrates a graphics controller, graphics processor, 12-bit 18 MSPS ADC with up to 45 analog inputs, CAN, and HS USB for embedded graphical user-interface designs. A 32-bit microcontroller (MCU) is an integrated circuit that combines a high-performance processor core, program memory, data memory, and peripherals on a single silicon die. The PIC32MZ DAL family specifically targets graphics HMI applications by combining an MCU-class programming model with MPU-class peripherals: a 2D Graphics Processing Unit (GPU) and a Display Controller that offload pixel rendering from the CPU, plus an external DDR2 DRAM interface (32 MB or 128 MB addressable) that serves as a framebuffer. Within the broader taxonomy, this device belongs to: microcontroller -> 32-bit MCU -> MIPS32 MCU -> PIC32MZ family -> graphics-capable sub-family -> PIC32MZ2025 DAL series. Key features include 2 MB Flash program memory, 640 KB SRAM, 200 MHz core clock with 252 DMIPS, hardware crypto engines, 10/100 Ethernet MAC, CAN 2.0, HS USB 2.0 with on-chip PHY, 12-bit 18 MSPS ADC with up to 45 analog inputs, and a 16-bit parallel master port for external DDR2. The 176-LQFP package provides 120 GPIO plus dedicated peripheral pins, suitable for industrial-temperature applications from -40C to +85C (I-temp grade). The PIC32MZ2025DAL176 uses a 5-stage MIPS32 microAptiv pipeline with dual-issue capability and tightly-coupled prefetch buffers, achieving 1.26 DMIPS/MHz. The integrated GPU accelerates fills, blits, alpha blending, and color-space conversion, freeing the CPU to handle communication stacks (Ethernet, USB, CAN). Dedicated DDR2 controller with on-board termination simplifies display framebuffer expansion without external memory controller glue. Typical applications include industrial HMI touch panels, automotive infotainment head units, medical patient monitors with graphical displays, point-of-sale terminals, building automation control panels, and embedded instrumentation with rich graphics. The combination of MCU simplicity and MPU-class graphics makes it a strong choice when designers want a single-chip BOM instead of a host MCU plus a separate GPU or display controller. When designing with this device, allocate sufficient PCB area for the external DDR2 routing (matched length, controlled impedance) and follow Microchip's DDR2 layout guidelines in the family reference manual. Ensure 5V-tolerant I/O lines are not exposed to voltages above the absolute maximum, and use the integrated thermal management and brown-out reset for robust industrial deployments. This page synthesizes distributor pricing, drop-in alternatives from the same Microchip PIC32MZ DAL family, and practical design notes that complement the manufacturer datasheet.

USD $9,65 Auf Lager

PIC32MZ2025DAL176T-V/2J

PIC32MZ2025DAL176T-V/2J - 200MHz 32-bit MCU with Graphics | Microchip

The Microchip Technology PIC32MZ2025DAL176T-V/2J is a 200 MHz 32-bit MIPS32 microAptiv microcontroller in the PIC32MZ DA family, integrating 2 MB Flash and 640 KB SRAM into a 176-pin LQFP (20x20 mm) package. It targets high-end graphical embedded designs, offering MPU-like performance with MCU-class integration including an on-chip Graphics Controller, Graphics Processor, 12-bit 18 MSPS ADC with up to 45 analog inputs, HS USB, and CAN. The "T" suffix denotes Tape & Reel packaging, the "V" suffix denotes the -40C to +125C extended V-temp grade, and "2J" is the Microchip tray/reel identifier. A 32-bit microcontroller (MCU) is an integrated circuit combining a processor core, program memory, data memory, and a rich set of peripherals on a single die. PIC32MZ DA parts sit at the top of the PIC32 family and are positioned as microcontrollers with MPU-like performance for graphical user interface designs, bridging the gap between traditional MCU simplicity and application processor capability. Key features include MIPS32 microAptiv core, 200 MHz core clock, 2 MB Flash, 640 KB SRAM, 12-bit 18 MSPS ADC, integrated Graphics Controller and Graphics Processor, HS USB 2.0, CAN 2.0, up to 45 analog channels, DDR2 DRAM controller for external memory expansion (32 MB or 128 MB), and a wide peripheral set including I2C, SPI, UART, SQI, and EBI. The 176-LQFP provides generous I/O for parallel display and memory interfaces. The device uses a 5-stage pipelined MIPS32 microAptiv core with DSP extensions, single-cycle hardware multiply/divide, and tightly coupled peripherals for deterministic real-time performance. The integrated Graphics Controller accelerates primitives (lines, rectangles, blits, alpha blending) while the Graphics Processor handles higher-level rendering tasks, offloading the CPU for smoother GUI rendering. Typical applications include industrial HMI panels, automotive infotainment and instrument clusters, medical patient-interface devices, point-of-sale terminals, avionics displays, smart appliances with touch GUI, and any embedded system requiring rich graphical rendering without an external MPU. When designing with this MCU, allocate PCB area for the DDR2 DRAM interface and provide sufficient decoupling on the analog AVdd rail serving the 12-bit ADC. The Graphics Controller expects an external parallel display via EBI, so plan the pin map to balance display data, touch, and other peripherals. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the standalone manufacturer datasheet to accelerate your design selection.

USD $9,72 Auf Lager

PIC32MZ2025DAR169-I/6J

PIC32MZ2025DAR169-I/6J - 200MHz MCU, 2MB Flash, 169-LFBGA | Microchip

The Microchip Technology PIC32MZ2025DAR169-I/6J is a 32-bit MIPS32 microAptiv PIC32MZ DAR microcontroller integrating 2MB Flash, 640KB SRAM, a 200 MHz core, integrated Graphics Controller, Graphics Processor, 12-bit 18 MSPS ADC with up to 45 analog inputs, and on-chip stacked DDR2 DRAM (up to 32 MB internal / 128 MB external addressable), housed in a 169-ball LFBGA package (11x11 mm). It is targeted at MPU-class graphical embedded applications while keeping MCU ease of design. A microcontroller (MCU) is an integrated circuit that combines a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals (ADC, timers, communication interfaces, GPIO) into a single chip. MCUs form the lowest tier of embedded compute hierarchy: MCU -> microcontroller -> embedded processor -> semiconductor IC, and they sit beneath microprocessors (MPUs) in raw performance but above discrete logic in integration. The PIC32MZ DA family specifically bridges MCU and MPU tiers by adding an LCD controller, 2D graphics processor and large stacked DDR2 memory on-chip. Key features of the PIC32MZ2025DAR169 include 32-bit MIPS32 microAptiv core running up to 200 MHz, 2MB Flash program memory (2M x 8), 640KB SRAM, integrated DDR2 memory controller, hardware 2D Graphics Processor and Display Controller, 12-bit 18 MSPS ADC with up to 45 analog input channels, CAN, HS USB, and an industrial operating temperature grade (-40C to +85C). The architecture pairs a deterministic MIPS32 Harvard core with a dedicated graphics pipeline and 32-bit DDR2 external memory interface, eliminating the need for an external MPU and reducing BOM cost in graphical HMI designs. The 18 MSPS ADC supports simultaneous touch and analog sensing, enabling resistive-touch GUIs without an external touch ASIC. Typical applications include industrial HMI panels, graphical touch displays, home automation controllers, medical device interfaces, automotive infotainment entry-level displays, and POS terminals that require on-board graphics rendering at MPU-like performance. When designing with this part, allocate PCB area for the 169-ball LFBGA (11x11 mm) and follow Microchip's DDR2 routing guidelines - the stacked-DDR2 footprint requires controlled-impedance matched-length traces. Use MPLAB Harmony 3 for peripheral and graphics driver support. This page synthesizes distributor pricing, drop-in alternative inventory, and practical design guidance drawn from Microchip application notes and reference designs - insights not consolidated on the manufacturer product page alone.

USD $13,25 Auf Lager

PIC32MZ2025DAR169-V/6J

PIC32MZ2025DAR169-V/6J - 200MHz 32-bit MCU, 2MB Flash, 169-LFBGA | Microchip

The Microchip Technology PIC32MZ2025DAR169-V/6J is a 32-bit MIPS32 microAptiv PIC microcontroller from the PIC32MZ DAR family with 2MB Flash, 200 MHz CPU clock, integrated Graphics Controller and Graphics Processor, on-chip stacked DDR2 DRAM (32 MB or 128 MB externally addressable), 12-bit 18 MSPS ADC with up to 45 analog inputs, HS USB, and CAN, in a 169-ball LFBGA (11x11 mm) package. It targets V-temp grade with -40C to +105C operation. The device is built around the MIPS32 microAptiv core and is part of Microchip's 32-bit MCU family optimized for graphical user interface applications. A PIC32MZ microcontroller is a 32-bit MCU based on the MIPS32 microAptiv core architecture, positioned above the Microcontrollers controller hierarchy as a low-endurance system-on-chip. The DAR sub-series specifically integrates a graphics LCD controller, hardware graphics processor (GPU), and a stacked DDR2 memory interface, allowing designers to drive a TFT display with MPU-class performance while retaining MCU-class ease of programming through MPLAB X IDE and MPLAB Harmony. Compared to legacy PIC32MX parts, PIC32MZ DAR provides significantly more RAM, on-chip DDR2, an integrated GPU, and a faster ADC, trading off power consumption for computational and graphical throughput. Key features include 2MB program Flash, 640 KB SRAM (per Microchip product page), HS USB 2.0 device/host/OTG, CAN 2.0B, integrated 12-bit 18 MSPS ADC with up to 45 analog inputs, six UART, SPI, I2C peripherals, dedicated graphics peripherals, and a 200 MHz core capable of 415 DMIPS. The 169-LFBGA package exposes 120 GPIO pins (per pcbelectronics listing) and offers a compact 11x11 mm footprint suitable for space-constrained HMI boards. The architecture pairs the 32-bit MIPS core to a dedicated graphics pipeline and DDR2 memory controller, eliminating the need for an external SDRAM chip for frame storage. The 12-bit 18 MSPS ADC supports high-speed sensor acquisition, while HS USB and CAN simplify connectivity for industrial gateways. Code development is supported through MPLAB X IDE, MPLAB Harmony, and XC32 compiler, with extensive middleware for graphics, USB, and TCP/IP stacks. Typical applications include graphical human-machine interface (HMI) panels, industrial control terminals with TFT LCD, automotive infotainment clusters, point-of-sale terminals, and IoT gateways with display. The integrated GPU and DDR2 interface allow developers to run emWin, LVGL, or Microchip MPLAB Harmony Graphics without external frame buffers. When designing with this device, allocate 8 or 10-layer PCB stack-up for the DDR2 interface to maintain signal integrity; the LFBGA-169 package requires microvia and via-in-pad capable fabrication. Ensure a stable 1.8V core supply and provide decoupling per the manufacturer reference schematic. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet, helping engineers shorten evaluation and sourcing.

USD $12,95 Auf Lager

PIC32MZ2025DAR169T-I/6J

PIC32MZ2025DAR169T-I/6J - 200MHz 32-bit MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2025DAR169T-I/6J is a high-performance 32-bit MIPS32 microAptiv microcontroller running at 200 MHz with 2 MB of Flash program memory, housed in a 169-ball LFBGA (11x11 mm) package. It integrates a dedicated Graphics Controller and Graphics Processor, 640 KB of on-chip SRAM, and an interface for external stacked DDR2 DRAM (32 MB or 128 MB), targeting graphical user interface (GUI) and human-machine interface (HMI) applications. A 32-bit microcontroller (MCU) is a single-chip computer integrating a CPU core, memory, and programmable peripherals. PIC32MZ DAR devices belong to the MIPS32 microAptiv MCU family, which sits in the broader category of 32-bit microcontrollers, embedded processors, and finally semiconductors. The "DAR" suffix specifically denotes the Graphics integrated family with stacked DDR2 DRAM support, distinguishing it from the DAA (lower pin count) and DAB (audio) sub-families. Key features include a 12-bit ADC module capable of 18 MSPS with up to 45 analog inputs, a 32-bit data bus, 120 I/O pins, integrated CAN and High-Speed USB, and an operating voltage of 1.8 V. The LFBGA-169 package provides 0.80 mm terminal pitch and a seated height of 1.56 mm, making it suitable for compact, high-density PCB designs typical of graphical embedded products. The PIC32MZ2025DAR169T-I/6J uses a single-core MIPS32 microAptiv architecture manufactured on CMOS process technology. The T-suffix indicates tape and reel packaging for high-volume assembly lines, while the I-temp suffix specifies an industrial temperature range of -40C to +85C for harsh-environment deployments. Typical applications include industrial HMI panels, automotive infotainment displays, medical patient monitors, smart-home control hubs, and graphical IoT gateways. The integrated DDR2 controller and graphics peripherals dramatically reduce BOM cost and PCB complexity compared to MCU-plus-external-GPU designs. When designing with this MCU, use a 4-layer PCB with dedicated ground and power planes for the DDR2 signals. Validate DDR2 trace length matching to the JEDEC DDR2 specification; failure to match impedances causes intermittent display corruption that is difficult to debug. The 169-ball BGA requires X-ray inspection or BGA rework capability at the assembly stage.

USD $12,95 Auf Lager

PIC32MZ2025DAR169T-V/6J

PIC32MZ2025DAR169T-V/6J - 200MHz MCU, 2MB Flash, 169-LFBGA | Microchip

The Microchip Technology PIC32MZ2025DAR169T-V/6J is a high-performance 32-bit MIPS32 microAptiv PIC microcontroller running at 200 MHz, integrating 2 MB of Flash and 640 KB of SRAM in a 169-ball LFBGA 11x11 mm package. The "T" suffix indicates Tape & Reel packaging and "-V" denotes the V-temp (-40C to +105C) operating grade, while the 169-ball LFBGA land pattern supports compact, high-density graphical embedded designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory, and peripherals. The PIC32MZ DA family belongs to the MIPS32 microAptiv Harvard architecture family within Microchip's broader 32-bit microcontroller portfolio, bridging MCU simplicity with MPU-class performance for graphical human-machine interface (HMI) applications. Key features of this part include 32 MB or 128 MB of externally addressable DDR2 DRAM interface, an integrated Graphics Controller and Graphics Processor, a 12-bit 18 MSPS ADC module with up to 45 analog inputs, plus CAN, HS USB, and multiple UART/SPI/I2C interfaces. The combination of L1 cache, large SRAM, and DDR2 controller delivers MPU-like throughput while retaining deterministic MCU interrupt behavior. Typical applications include industrial HMI panels, automotive instrument clusters, graphical touch-screen controllers, IoT gateways with rich UIs, medical patient monitors, and multi-rail power-aware appliances where 2 MB of Flash supports vector graphics assets and DDR2 RAM buffers large framebuffers. When designing with this MCU, follow the Microchip DDR2 layout guide for the LFBGA escape and allocate adequate decoupling. Provide separate analog and digital supplies and respect the V-temp thermal limits during board-level qualification.

USD $12,10 Auf Lager

PIC32MZ2025DAR176-V/2J

PIC32MZ2025DAR176-V/2J - 200MHz MCU, 2MB Flash, 176-LQFP | Microchip

The Microchip Technology PIC32MZ2025DAR176-V/2J is a 32-bit MIPS32 microAptiv PIC microcontroller from the PIC32MZ Graphics (DAK/DAL/DAR/DAS) family, designed for MPU-class performance with MCU simplicity in graphical HMI applications. The device integrates 2 MB of Flash, 640 KB of SRAM, and supports up to 32 MB (or 128 MB externally addressable) of stacked DDR2 DRAM, with a 200 MHz CPU core, integrated Graphics Controller and Graphics Processor, a 12-bit 18 MSPS ADC with up to 45 analog inputs, plus CAN and Hi-Speed USB peripherals, all housed in a 176-pin LQFP package (20x20 mm). A 32-bit microcontroller (MCU) is a single-chip processor that integrates a CPU core, program and data memory, and programmable peripherals onto one silicon die. The PIC32MZ family positions these devices between classical 8/16-bit MCUs and application processors, delivering MHz-class throughput, large memory, and rich peripherals while remaining programmable in C with a deterministic interrupt model. The DAR suffix indicates a 2 MB Flash, 176-pin Graphics variant, and the -V suffix denotes the V-temp (-40C to +105C) operating range suitable for industrial and harsh-environment GUI designs. Key differentiating features of this part include on-chip stacked DDR2 DRAM (eliminating an external SDRAM), a dedicated 2D Graphics Processing Unit and parallel display controller driving TFT panels without an external graphics chip, and an HS USB 2.0 PHY plus 2 CAN 2.0b controllers for industrial networking. The 176-LQFP footprint gives generous I/O for parallel RGB displays, touch controllers, and external sensors. Architecturally, the PIC32MZ DA family uses a MIPS32 microAptiv core with a 16 KB I-cache and 4 KB D-cache, prefetch buffers, and tightly-coupled peripherals including a 12-bit 18 MSPS successive-approximation ADC, SQI (Serial Quad Interface) for XIP flash, and an EBI for additional memory expansion. Hardware crypto, audio DAC interfaces, and a 10/100 Ethernet MAC with integrated PHY round out the connectivity set for embedded GUI nodes. Typical applications include industrial HMI panels, home-automation touch controllers, medical instrument displays, point-of-sale terminals, automotive cluster prototypes, and low-cost MPU replacements in graphical embedded products. Engineers typically pair this MCU with a TFT LCD (RGB888), an external touch controller over I2C, and a NOR flash for asset storage via SQI. Designers should allocate adequate PCB area for the 176-LQFP (20x20 mm) footprint, route DDR2 signals with matched lengths and 50 ohm controlled impedance, and provide bulk decoupling on every supply pin. The on-chip stacked DDR2 relaxes board complexity versus an external SDRAM design but still demands strict reference-voltage and VTT termination design. This page synthesizes distributor pricing, verified drop-in alternatives from the same PIC32MZ DA family, and practical design notes that go beyond what is in the manufacturer datasheet, including a same-package comparison with the DAB/DAA/DAR family members and routing guidance for the 176-LQFP DDR2 variant.

USD $9,56 Auf Lager

PIC32MZ2025DAR176T-I/2J

PIC32MZ2025DAR176T-I/2J - 200MHz 2MB Flash 32-bit MCU | Microchip

The Microchip PIC32MZ2025DAR176T-I/2J is a high-performance MIPS32 microAptiv PIC32MZ DAR microcontroller running at 200 MHz, with 2 MB of Flash and 176-LQFP (20x20 mm) packaging, plus an exposed thermal pad. It is targeted at GUI-rich embedded applications thanks to an integrated Graphics Controller, Graphics Processor, 12-bit 18 MSPS ADC with up to 45 analog inputs, and High-Speed USB plus CAN connectivity. The /2J industrial temperature grade supports -40C to +85C operation. A 32-bit microcontroller (MCU) is a single-chip processor that integrates CPU core, memory, and peripherals. The PIC32MZ DAR family sits at the high end of the PIC32 portfolio, blending MPU-class performance with MCU simplicity. Within the taxonomy, the device belongs to: microcontroller -> 32-bit MCU -> MIPS32 MCU -> PIC32MZ family -> PIC32MZ DAR sub-family. The DAR variant is purpose-built for human-machine-interface designs, distinguished from EF and EC sub-families by its graphics pipeline and DDR2 memory controller. Key features include 2 MB of Flash (2M x 8), up to 640 KB of SRAM, on-chip support for external 32 MB or 128 MB DDR2 DRAM, and an integrated LCD controller. The 12-bit ADC achieves 18 MSPS, and the device offers up to 45 analog input channels. A hardware crypto engine, parallel master port, and 200 MHz core give the MCU enough throughput for advanced HMIs and connected IoT edge nodes. Architecturally, the PIC32MZ DAR combines a MIPS32 microAptiv core with a dedicated graphics processor and DDR2 DRAM controller - a rare pairing in an MCU footprint. This dual-engine design lets a single chip drive WVGA-resolution displays while still handling application logic, eliminating the need for a separate graphics companion IC. The on-die Flash and SRAM provide deterministic code execution with zero external memory wait states for code stored in Flash. Typical applications include industrial HMI panels, automotive infotainment, medical patient monitors, smart home control displays, and ruggedized portable terminals. The DDR2 controller allows large framebuffers without external SDRAM controllers, while the 12-bit 18 MSPS ADC supports simultaneous touchscreen and analog sensor monitoring. When designing with this device, allocate PCB area for DDR2 routing with controlled-impedance traces and matched length matching, since the DDR2 interface is critical for graphics performance. The 176-LQFP exposed pad requires thermal vias for reliable operation above 100 mA core current. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

USD $11,95 Auf Lager

PIC32MZ2025DAS169-I/6J

PIC32MZ2025DAS169-I/6J - 200MHz 32-bit MCU 2MB Flash | Microchip

The Microchip Technology PIC32MZ2025DAS169-I/6J is a 32-bit MIPS microAptiv PIC32MZ DAS microcontroller running at 200 MHz with 2 MB of Flash and 640 KB of SRAM, packaged in a 169-ball LFBGA (11x11 mm) and offering 32 MB or 128 MB of externally addressable DDR2 DRAM. It integrates a graphics controller, graphics processor, a 12-bit 18 MSPS ADC with up to 45 analog inputs, plus CAN, HS USB, and 120 GPIO. A 32-bit microcontroller (MCU) is a single-chip computer that combines a high-performance processor core, program and data memory, and a rich set of peripherals. The PIC32MZ family sits inside the broader taxonomy of microcontrollers -> embedded processors -> semiconductors, and uses the MIPS32 instruction set, which is widely supported by GCC, IAR, and MPLAB XC32 toolchains. Key features include hardware graphics rendering for GUI applications, a 12-bit 18 MSPS ADC capable of 45 analog input channels, on-chip DDR2 controller eliminating external memory chips, high-speed USB 2.0 with embedded PHY, and CAN 2.0b for industrial networking. The 200 MHz core delivers 330 DMIPS and 3.28 CoreMark/MHz, while the wide 32-bit datapath accelerates pixel and audio buffer handling. The PIC32MZ2025DAS169-I/6J architecture pairs an MIPS32 microAptiv core with a multi-layer bus matrix that allows the graphics engine, USB, and ADC to access SRAM and DDR2 without stalling the CPU. The stacked-DDR2 variant lowers BOM cost and PCB area versus an SDRAM + controller implementation, while keeping deterministic interrupt latency needed for industrial HMI. Typical applications include industrial HMI designs, automotive dashboard graphics, IoT gateways with LCD, medical patient monitors, and audio/visual embedded consoles. The combination of on-chip DDR2 plus integrated GPU removes the need for a discrete display controller in mid-resolution TFT panels. When designing with this device, plan the PCB for 169-ball BGA escape and follow Microchip's DDR2 layout guide for the stacked-DRAM pins. Decoupling, trace-length matching for DDR2, and thermal copper pours under the BGA are critical; otherwise signal integrity at 200 MHz will degrade. This page synthesizes Microchip datasheet specifications, current distributor pricing, and drop-in alternatives not collated on the manufacturer's product page.

USD $7,85 Auf Lager

Unterkategorien

Produkte (32725)