Mikrocontroller

Produkte (20.000+)

DSPIC33FJ16GS504T-50I/PT - 50 MIPS 16KB Flash SMPS DSC | Microchip
DSPIC33FJ16GS504T-50I/PT

DSPIC33FJ16GS504T-50I/PT - 50 MIPS 16KB Flash SMPS DSC | Microchip

The Microchip Technology DSPIC33FJ16GS504T-50I/PT is a 16-bit Digital Signal Controller (DSC) from the dsPIC33F SMPS family, combining DSP performance with MCU simplicity and integrating high-speed PWM, 10-bit ADC, and analog comparators tailored for digital power conversion. It delivers 50 MIPS (40 MHz MIPS equivalent at 2.3 V core) from 16 KB of Flash program memory and 2 KB of RAM, packaged in a 44-pin TQFP (10x10 mm, 0.80 mm pitch, also denoted PT). The "T" suffix indicates tape-and-reel packaging and the "50I" speed grade denotes 50 MIPS industrial temperature operation from -40C to +85C. A Digital Signal Controller (DSC) is a class of embedded processor that pairs a modified Harvard RISC CPU with a DSP engine, enabling deterministic single-cycle MAC operations and high-throughput digital filtering without external DSP co-processors. Within the embedded hierarchy, DSCs sit between microcontrollers (MCUs) and full DSPs, optimized for real-time control loops such as digital switch-mode power supplies (SMPS), motor drives, and power-factor correction. The dsPIC33F SMPS sub-family devices also integrate dedicated analog peripherals to close multiple control loops in a single chip. Key features of the DSPIC33FJ16GS504T-50I/PT include high-resolution PWM outputs supporting multi-loop SMPS topologies, a 10-bit analog-to-digital converter with up to 24 input channels, dual analog comparators with programmable hysteresis, and a peripheral engine designed for cycle-by-cycle current limiting. The dsPIC33F core executes a single-cycle 16x16-bit MAC and supports fractional arithmetic, enabling efficient digital compensator implementation for voltage-mode and current-mode converters. Multiple communication peripherals (UART, SPI, I2C) provide flexibility for system telemetry and external synchronization. Typical applications include AC-to-DC converters, isolated and non-isolated DC-to-DC converters, power factor correction (PFC), uninterruptible power supplies (UPS), solar micro-inverters, digital LED drivers, and BLDC motor controllers. The integrated high-speed analog front-end substantially reduces the BOM count by replacing external comparators and dedicated PWM controllers in legacy analog designs. When designing with this device, confirm that the 3.0 V to 3.6 V VDD supply range and 50 MIPS throughput match the control-loop sampling budget of the chosen topology. The 44-pin TQFP provides 35 general-purpose I/O pins, leaving sufficient headroom for multi-phase current sensing, fault inputs, and communication buses. For higher-memory or extended-temperature variants, evaluate the dsPIC33FJ16GS504-50I/PT (tray), the -I/PT industrial range, or the higher-pin-count dsPIC33FJ16GS404 family. This page synthesizes distributor pricing, parametric alternatives, and design guidance drawn from Microchip documentation - complementary to, not a replacement for, the official datasheet.

Angebot Kontakt
DSPIC33FJ16GS504T-50I/TL - 50 MIPS 16-Bit SMPS DSC | Microchip
DSPIC33FJ16GS504T-50I/TL

DSPIC33FJ16GS504T-50I/TL - 50 MIPS 16-Bit SMPS DSC | Microchip

The Microchip DSPIC33FJ16GS504T-50I/TL is a 16-bit Digital Signal Controller (DSC) from the dsPIC33F SMPS family, delivering 50 MIPS of performance at up to 50 MHz core clock and integrating high-speed peripherals tailored for Switch-Mode Power Supply (SMPS) and digital power conversion applications. It comes in a 44-pin VTLA (6x6 mm) surface-mount package with the “TL” package designator and is supplied on tape and reel (“T” suffix). Per the Microchip product page and distributor listings, the device includes 16 KB of Flash program memory, 2 KB (2048 words) of RAM, hardware MAC, zero-overhead looping, integrated PWM control with DAC, integrated ADC interface, RTC/timer, interrupt controller, and low-power modes. Operating voltage is 3.0 V to 3.6 V with an industrial temperature range of -40C to +85C. A Digital Signal Controller (DSC) is a hybrid device that combines the deterministic interrupt and bit-manipulation strengths of a microcontroller with the computational throughput of a digital signal processor (DSP). Within the broader taxonomy, the dsPIC33F DSC sits below a general-purpose DSP, below a 16-bit MCU, and ultimately under the microcontroller and embedded-processor family. The “SMPS” variant of dsPIC33F adds high-resolution PWM, dedicated current/voltage feedback paths, and analog comparators specifically tuned for closed-loop digital control of DC-DC converters, PFC stages, and lighting ballasts. Key differentiating features of the DSPIC33FJ16GS504T-50I/TL include 50 MIPS CPU performance (vs. 40 MIPS on the lower-speed -I/TL sibling), 16 KB self-programmable Flash, 2 KB RAM, hardware multiply-accumulate (MAC), 4 analog comparators with DAC references, 12-bit ADC with up to 8 channels, high-speed 10-bit PWM outputs suitable for multi-phase SMPS topologies, and zero-overhead loop support that simplifies digital compensator code. The 44-pin VTLA package is optimized for compact digital-power modules. Architecturally, the device uses a modified Harvard architecture with separate program and data buses, a 16-bit wide datapath, and a DSP engine that executes a 17-bit x 17-bit MAC in one cycle. This combination allows tight C-control loops on PFC, LLC, and synchronous buck converters while leaving CPU headroom for housekeeping tasks such as PMBus communication, sequencing, and protective state machines. Typical applications include digitally controlled AC-DC and DC-DC converters (PFC, LLC, full-bridge), LED drivers and dimmable ballasts, solar micro-inverters, UPS systems, and industrial motor-control auxiliary rails. The high-speed PWM and on-chip comparators enable cycle-by-cycle current limiting and adaptive dead-time insertion, which are difficult to implement on a generic microcontroller. When designing with the DSPIC33FJ16GS504T-50I/TL, ensure the 3.3 V rail is well decoupled (typically a 1 uF + 100 nF pair near each VDD/VSS pin pair), respect the 3.6 V absolute-maximum supply rating, and assign PWM fault inputs to prioritized change-notification pins to guarantee sub-microsecond over-current shutdown. Use the JTAG or PGx programming interface for in-circuit firmware updates. This page synthesizes distributor pricing, drop-in VTLA-44 package alternatives, and practical design notes drawn from the Microchip SMPS DSC datasheet family that are not consolidated on the manufacturer product page.

Angebot Kontakt
DSPIC33FJ16GS504T-E/TL - 16-bit DSC, 40 MIPS, 16KB Flash | Microchip
DSPIC33FJ16GS504T-E/TL

DSPIC33FJ16GS504T-E/TL - 16-bit DSC, 40 MIPS, 16KB Flash | Microchip

The Microchip Technology DSPIC33FJ16GS504T-E/TL is a high-performance 16-bit Digital Signal Controller (DSC) from the dsPIC33F SMPS family that integrates a dsPIC DSC core with DSP engine, 16 KB of Flash program memory, and 2 KB of SRAM in a 44-pin VTLA (6x6 mm) surface-mount package. It executes instructions at up to 40 MIPS from a 40 MHz oscillator, includes on-chip high-speed 10-bit ADC and 10-bit DAC peripherals aimed at digital power conversion, and supports an extended industrial temperature range denoted by the "E" suffix. A Digital Signal Controller (DSC) is a hybrid microcontroller that combines a deterministic 16-bit MCU controller with a single-cycle DSP MAC engine on the same die. dsPIC33F parts sit within the broader hierarchy: DSC -> microcontroller -> embedded controller -> semiconductor. SMPS-targeted dsPIC33F GS variants such as the 16GS504 add high-resolution PWM outputs and fast ADC sampling intended for switched-mode power supply control loops, where the DSP path runs the compensator while the MCU path handles housekeeping, communication, and protection sequencing. Key features include 16 KB of self-programmable Flash, 2 KB SRAM, 24 channels of 10-bit ADC and 4 channels of 10-bit DAC on chip, multiple PWM modules with duty-cycle resolution suitable for digital power conversion, and a wide 3.0V to 3.6V supply range. The part is AEC-Q100 qualified (Automotive grade per the GlobalSpec datasheet listing) and ships in a 6x6 mm 44-pin VTLA package suitable for compact, high-density power-conversion boards. Architecturally, the 16GS504 pairs a modified Harvard bus with a 16-bit DSP engine capable of single-cycle 16x16 MAC operations. This makes the device suitable for closed-loop control of DC-DC converters, PFC stages, and digital lighting ballasts where deterministic control-loop timing is required without external DSP co-processors. Typical applications include digitally controlled switched-mode power supplies, AC-DC and DC-DC converters with PFC, uninterruptible power supplies (UPS), digital lighting ballasts, and motor-control inverter stages. The extended-temperature ("-E") grade also makes the device suitable for industrial automation and white-goods power stages. When designing with this device, ensure the JTAG/ICSP programming interface is accessible and that the 44-pin VTLA land pattern matches your PCB footprint. Review the SMPS datasheet chapter for ADC acquisition timing and PWM-to-ADC synchronization, because digital power loops are highly sensitive to sampling jitter. This page synthesizes verified distributor pricing, same-package drop-in alternatives, and practical SMPS design notes that go beyond the manufacturer datasheet's parametric summary, helping power-supply engineers shorten component-selection and board-bring-up cycles.

Angebot Kontakt
DSPIC33FJ16GS504T-I/PT - 16-bit DSC, 40 MIPS, 16KB Flash | Microchip
DSPIC33FJ16GS504T-I/PT

DSPIC33FJ16GS504T-I/PT - 16-bit DSC, 40 MIPS, 16KB Flash | Microchip

The Microchip Technology DSPIC33FJ16GS504T-I/PT is a 16-bit Digital Signal Controller (DSC) from the dsPIC33F family, combining MCU-style peripherals with DSP-grade compute throughput. Housed in a 44-pin TQFP (10x10 mm) package and qualified over the -40C to +85C industrial temperature range, it integrates 16 KB of Flash program memory, 2048 bytes of RAM, a 40 MIPS modified Harvard CPU, and SMPS-oriented analog such as high-speed PWM, ADC, and comparators. Tape-and-reel packaging ('T' in the part number) supports high-volume SMD assembly. A Digital Signal Controller (DSC) is a hybrid device that merges the deterministic interrupt response and peripheral set of a microcontroller (MCU) with the multiply-accumulate (MAC) throughput of a digital signal processor (DSP). In the broader semiconductor hierarchy, a DSC sits between MCU and DSP, belongs to the microcontroller family, and is classified as an embedded signal-processing IC. This positioning lets engineers implement closed-loop control, filtering, and modulation firmware in a single device, eliminating the need for a discrete DSP plus MCU partition. Key features include a 40 MHz maximum operating frequency with 40 MIPS sustained throughput, 16-bit data path with DSP engine (single-cycle MAC, barrel shifter, divide), 2048 bytes SRAM, four high-speed PWM channels targeting multi-loop SMPS topologies, a 10-bit ADC with dedicated S&H and conversion rates suitable for current/voltage sense, four analog comparators for cycle-by-cycle current limiting, and standard dsPIC33 communication peripherals (UART, SPI, I2C). Integrated op amps, a 5-bit DAC, and a PWM fault input further reduce the analog bill of materials in power-conversion designs. Architecturally, the device uses a 16-bit modified-Harvard core with a 24-bit instruction word, hardware DO/REPEAT loops, and zero-overhead looping, with the DSP engine supporting fractional (1.15) and integer math in a single cycle. The combination of deterministic core and SMPS-optimized analog makes the GS504 family a reference platform for digital power conversion: voltage-mode and peak-current-mode control, PFC, resonant and phase-shifted full-bridge control, and digital audio amplification all map cleanly onto the on-chip PWM/ADC/peripheral set. Typical applications include AC-DC and DC-DC switch-mode power supplies, power factor correction (PFC) stages, uninterruptible power supplies (UPS), digital audio Class-D amplifiers, induction heating, and motor-control drives. Industrial and renewable-energy converters also benefit from the on-chip analog front end and deterministic PWM, which simplify implementation of multi-loop digital control laws. When designing with this device, ensure that the selected switching frequency and ADC sample timing are co-scheduled with the PWM module to avoid sample-to-PPWM jitter, and select the correct 'speed grade' suffix (40 MIPS or 50 MIPS) for your MIPS budget. For applications requiring higher throughput or more memory, the GS504 may be migrated within the dsPIC33F SMPS family (e.g., dsPIC33FJ16GS404) using compatible peripherals and pinout. This page synthesizes verified distributor pricing, same-package drop-in alternatives, and practical design notes drawn from the Microchip dsPIC33FJ16GS504 family datasheet - information not consolidated on any single distributor page.

Angebot Kontakt
DSPIC33FJ16GS504T-I/TL - 16-Bit 40MIPS DSC 16KB Flash | Microchip
DSPIC33FJ16GS504T-I/TL

DSPIC33FJ16GS504T-I/TL - 16-Bit 40MIPS DSC 16KB Flash | Microchip

The Microchip Technology DSPIC33FJ16GS504T-I/TL is a 16-bit dsPIC33F digital signal controller (DSC) delivering 40 MIPS performance with 16KB (16K x 8) of FLASH program memory, 2KB of data RAM, and an integrated SMPS-focused peripheral set, housed in a 44-pin VTLA (6x6 mm) surface-mount package rated for -40C to +85C industrial operation at a 3.0V to 3.6V supply. A digital signal controller combines the control peripherals of a microcontroller with the math acceleration of a DSP in a single core. Within the power-management hierarchy, the dsPIC33F GS family sits at the intersection of general-purpose MCUs and dedicated digital power ICs: it is a 16-bit DSC optimized specifically for switch-mode power supply (SMPS) loop control, where fast deterministic interrupt response and high-resolution PWM matter more than raw processing throughput. Key features include a high-speed PWM module with complementary outputs and dead-time control for half-bridge and full-bridge converters, integrated analog comparators and a high-speed ADC tailored for current-mode and voltage-mode feedback, hardware MAC acceleration for fast PID compensators, zero-overhead looping for control-loop kernels, RTC and timer resources, low-power modes, and a high-speed peripheral interface for digital communication with companion converters. The architecture pairs the dsPIC33F 16-bit pipelined core with dedicated DSP instructions, enabling single-cycle multiply-accumulate operations that execute control-loop compensation in microseconds. The ADC-PWM synergy allows tightly synchronized current sampling at the midpoint of each PWM cycle, minimizing switching-noise-induced measurement error in peak current-mode control. Typical applications include AC-DC converters, DC-DC converters (including quarter-brick intermediate bus architectures), Power Factor Correction (PFC) stages, and uninterruptible power supplies (UPS), as well as battery chargers and LED drivers where adaptive digital control outperforms fixed analog compensation. Design consideration: the 3.0V to 3.6V supply range requires a clean 3.3V rail; place 0.1uF decoupling at every VDD/VSS pair and keep high-current PWM traces away from the analog feedback lines to preserve ADC accuracy. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Angebot Kontakt
DSPIC33FJ16MC101-E/P - 16-Bit DSC, 16MIPS, 16KB Flash | Microchip
DSPIC33FJ16MC101-E/P

DSPIC33FJ16MC101-E/P - 16-Bit DSC, 16MIPS, 16KB Flash | Microchip

The Microchip Technology DSPIC33FJ16MC101-E/P is a 16-bit digital signal controller (DSC) from the dsPIC33FJ motor control family, delivering 16 MIPS at 40 MHz with 16KB (16K x 8) Flash program memory, 1KB of RAM, and a 20-pin PDIP (0.3 inch, 7.62mm) through-hole package rated for -40C to +125C operation. A digital signal controller combines the computational power of a digital signal processor with the deterministic control structure of a microcontroller. In the embedded systems hierarchy, the DSC sits above general-purpose microcontrollers and below application-specific DSPs, making it ideal for real-time closed-loop control where both fast math (multiply-accumulate, DSP engine instructions) and flexible I/O are required. The dsPIC33F family is Microchip's mainstream 16-bit DSC line, programmed through the MPLAB ecosystem. Key features of this part include a motor control PWM module (MCPWM) for driving three-phase and brushless motors, a 10-bit ADC with 4 input channels for current and voltage feedback, up to four high-speed analog comparators, and a CTMU (Charge Time Measurement Unit) for precision time and capacitive measurement. Peripheral Pin Select (PPS) allows digital peripherals to be remapped to available pins, maximizing flexibility in low-pin-count designs. Communication interfaces include UART, SPI, and I2C. The dsPIC33F core executes an optimized C compiler-friendly instruction set with two 40-bit accumulators, a 17-bit by 17-bit single-cycle hardware multiplier, and a DSP engine supporting MAC and dual data fetch, enabling FOC (field-oriented control) and other math-intensive control algorithms at 16 MIPS. Typical applications include Brushless DC (BLDC) and permanent-magnet motor drives, power factor correction and digital power supplies, battery chargers, and sensor signal conditioning with the CTMU. Design consideration: the part operates from a single 3.0V to 3.6V supply; 5V-tolerant digital pins simplify interfacing, but analog inputs must stay within the VDD range. This page synthesizes distributor pricing tiers, verified drop-in alternatives, and practical motor-control design notes not found in the manufacturer datasheet. Pricing is as of 2026-09-27.

Angebot Kontakt
DSPIC33FJ16MC304-E/PT - 16-bit 40 MIPS DSC 44-TQFP | Microchip
DSPIC33FJ16MC304-E/PT

DSPIC33FJ16MC304-E/PT - 16-bit 40 MIPS DSC 44-TQFP | Microchip

The Microchip Technology DSPIC33FJ16MC304-E/PT is a 16-bit Digital Signal Controller (DSC) delivering 40 MIPS performance with 16 KB FLASH and 2 KB SRAM, housed in a 44-pin TQFP (10 x 10 mm) package with extended temperature operation. A Digital Signal Controller combines the computational throughput of a Digital Signal Processor (DSP) with the deterministic, interrupt-driven behavior of a microcontroller (MCU). Within the power-management hierarchy, the dsPIC33FJ16MC304 family sits in the 16-bit DSC class optimized specifically for digital motor control, where field-oriented control loops, PWM generation, and fast analog feedback must execute within tight cycle budgets. Key features include a 16-bit dsPIC33F core running at up to 40 MIPS, 16 KB (16K x 8) of self-programmable FLASH program memory, 2 KB of SRAM, and two high-speed PWM generators with independent timebases. The Peripheral Pin Select (PPS) capability allows flexible remapping of digital peripherals onto available I/O pins, and up to four high-speed analog comparators with direct connections support current-limit and fault-protection functions without external circuitry. The part also integrates ADC and input-capture/output-compare resources required for sensorless and sensored motor control algorithms. Architecturally, the dsPIC33F core provides DSP-engine multiply-accumulate (MAC) instructions and dual operand fetch, enabling execution of PI and Park/Clarke transform calculations at full 40 MIPS speed. The 3.0 V to 3.6 V supply range matches standard 3.3 V industrial rails. The -E suffix denotes the extended operating temperature option, making the device suitable for thermally demanding enclosures. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) drives, power factor correction converters, digital UPS systems, and industrial automation controllers where high-speed PWM and fast comparator-based fault detection are essential. Design consideration: enable the integrated brown-out and watchdog facilities, and route PWM outputs with gate-driver dead-time margins, because the high-speed PWM peripherals can switch fast enough to stress driver stages if dead time is misconfigured. This page synthesizes distributor pricing, drop-in alternatives within the dsPIC33FJ 44-TQFP family, and practical design notes not found in the manufacturer datasheet.

Angebot Kontakt
DSPIC33FJ16MC304-H/PT - 16-bit DSC, 20 MIPS Motor Control | Microchip
DSPIC33FJ16MC304-H/PT

DSPIC33FJ16MC304-H/PT - 16-bit DSC, 20 MIPS Motor Control | Microchip

The Microchip Technology DSPIC33FJ16MC304-H/PT is a 16-bit Digital Signal Controller (DSC) from the dsPIC33FJ16MC304 Motor Control family, delivering 20 MIPS performance at 40 MHz with 16KB of Flash program memory and 2KB of SRAM, housed in a 44-pin TQFP (10x10 mm) package. It integrates high-speed PWM, up to four high-speed comparators, and motor-control peripherals optimized for embedded motor drive applications. A Digital Signal Controller combines the compute throughput of a Digital Signal Processor (DSP) with the peripheral set and deterministic control of a microcontroller (MCU). In the power-management hierarchy of embedded systems, DSCs sit between general-purpose MCUs and dedicated DSPs, making them the preferred choice for closed-loop control of switching power electronics such as BLDC, PMSM, and AC induction motor drives. Key features include two PWM generators with independent timebases, Peripheral Pin Select (PPS) for flexible I/O remapping, an on-chip ADC with comparators for current-sense feedback, and up to 35 general-purpose I/O. The 16KB Flash supports self-programming, and the 2KB SRAM provides working memory for control-loop variables. The -H/PT ordering code denotes extended temperature operation per Microchip data for this device family. Architecturally, the dsPIC33F core pairs a 16-bit RISC CPU with DSP engine instructions (MAC, DSP multiply-accumulate), enabling single-cycle math operations used in field-oriented control (FOC) and PID loops. The supply range is 3.0V to 3.6V nominal 3.3V operation, simplifying integration in standard 3.3V industrial systems. Typical applications include brushless DC motor control, sensorless PMSM drives, digital power supplies (PFC, LLC), and automotive AEC-Q100-qualified auxiliaries. The high-speed PWM with fault inputs and direct comparator connection supports cycle-by-cycle current limiting. Design consideration: leverage Peripheral Pin Select to route PWM and capture signals optimally on the PCB, but note that some analog functions are fixed-pin; plan the ADC input mapping early in layout. Ensure adequate decoupling on all VDD pins of the 44-TQFP. This page synthesizes distributor availability, drop-in same-family alternatives, and practical motor-control design notes not consolidated in the manufacturer datasheet.

Angebot Kontakt
DSPIC33FJ256GP506T-I/PT - 16-bit DSC 40 MIPS 256KB Flash | Microchip
DSPIC33FJ256GP506T-I/PT

DSPIC33FJ256GP506T-I/PT - 16-bit DSC 40 MIPS 256KB Flash | Microchip

The Microchip Technology DSPIC33FJ256GP506T-I/PT is a high-performance 16-bit Digital Signal Controller (DSC) delivering up to 40 MIPS at 3.3V, with 256 KB of on-chip Flash program memory, housed in a 64-pin TQFP (10x10 mm) surface-mount package. A Digital Signal Controller combines the computational architecture of a Digital Signal Processor (DSP) with the peripheral set and control-oriented structure of a microcontroller. Within the power management hierarchy of embedded systems, the dsPIC33F family sits between general-purpose 16-bit MCUs (such as the PIC24) and dedicated DSPs, offering hardware multiply-accumulate (MAC), division support, and DSP instruction extensions while retaining rich microcontroller peripherals. The dsPIC33FJ256GP506 belongs to the General Purpose (GP) subfamily and shares a high degree of pin compatibility with the PIC24H and dsPIC30F families, giving designers seamless migration options. Key features include a modified Harvard architecture optimized for C compilation, 40 MIPS performance from an internal PLL clock scheme, a wide 2.5V to 3.6V operating range, and industrial temperature support (-40C to +85C) indicated by the I suffix. The 64-TQFP package provides ample general-purpose I/O for motor control feedback, communication, and human-interface functions. The controller integrates a high-speed ADC for analog acquisition, multiple serial communication modules (UART, SPI, I2C), general-purpose timers, output-compare/input-capture channels, and in-circuit serial programming (ICSP) via dedicated PGECx/PGEDx pin pairs. The DSP engine supports single-cycle MAC and dual operand fetch, enabling efficient FIR/IIR filtering, FFT computation, and control-loop execution in single-chip designs. Typical applications include digital power supplies and power conversion, sensor signal conditioning and analysis, industrial automation controllers, motor drive interfaces, and general-purpose embedded control where DSP-class math is required alongside microcontroller peripherals. When designing, remember that more than one PGECx/PGEDx pair exists for programming; you must use the selected pair consistently (for example, ICSPCLK on PGEC2 requires ICSPDAT on PGED2). This page synthesizes distributor availability data, drop-in alternatives, and practical design notes beyond what the manufacturer product page alone provides.

Angebot Kontakt
DSPIC33FJ256GP510-I/PT - 16-bit DSC 40 MIPS 256 KB Flash | Microchip
DSPIC33FJ256GP510-I/PT

DSPIC33FJ256GP510-I/PT - 16-bit DSC 40 MIPS 256 KB Flash | Microchip

The Microchip Technology DSPIC33FJ256GP510-I/PT is a high-performance 16-bit Digital Signal Controller (DSC) delivering up to 40 MIPS at 40 MHz, with 256 KB of Flash program memory and 30 KB of SRAM, housed in a 100-pin TQFP (12x12 mm) surface-mount package operating from a single 3.0 V to 3.6 V supply. A Digital Signal Controller combines the compute throughput of a Digital Signal Processor (DSP) with the peripheral integration and deterministic control of a microcontroller (MCU). Within the embedded-processing hierarchy, the DSC sits between a general-purpose MCU and a dedicated DSP, making the dsPIC33F family a natural choice for motor control, digital power conversion, and sensor signal processing where both math throughput and tight real-time I/O are required. Key features of the DSPIC33FJ256GP510 include the dsPIC33F core with a hardware DSP engine (single-cycle 16x16 MAC, 40-bit wide accumulator, dual-operand fetch), a general-purpose peripheral set with multiple UART, SPI, and I2C modules, a high-speed 12-bit ADC with multi-channel scanning, output compare and input capture channels for PWM and timing, plus In-Circuit Serial Programming (ICSP) and in-circuit debugging via PGECx/PGEDx pin pairs. The -I suffix indicates industrial -40C to +85C temperature coverage. Architecturally, the dsPIC33F core executes most instructions in a single cycle at up to 40 MIPS and provides deterministic interrupt latency, which is essential for field-oriented motor control loops and digital power feedback loops. The 256 KB self-programmable Flash supports field firmware updates, and the family offers seamless migration to/from PIC24 MCUs and dsPIC30F DSCs in similar packages, protecting software investment across product generations. Typical applications include BLDC and PMSM motor control drives, switch-mode power supplies and digital lighting, industrial sensors and instrumentation, audio and signal-conditioning front ends, and embedded control in appliances and power tools. When designing the PCB, connect all VDD and VSS pin pairs; per the manufacturer guidance, leaving any supply pin unconnected can cause programming or debugging failures over ICSP. Decouple every supply pin with 0.1 uF ceramics placed close to the pins to keep the analog and digital rails quiet. This page synthesizes distributor pricing data, verified drop-in alternatives, and practical design notes not found in the standard datasheet, as of 2026-10-07.

Angebot Kontakt
DSPIC33FJ256GP510A-E/PT - 16-Bit DSC 256KB Flash | Microchip
DSPIC33FJ256GP510A-E/PT

DSPIC33FJ256GP510A-E/PT - 16-Bit DSC 256KB Flash | Microchip

The Microchip Technology DSPIC33FJ256GP510A-E/PT is a 16-bit Digital Signal Controller (DSC) delivering 40 MIPS at 3.3 V, with 256 KB (256K x 8) of Flash program memory and 30 KB of SRAM, housed in a 100-pin TQFP (12x12 mm) package. It combines a modified RISC CPU core with a DSP engine, making it a single-chip solution for motor control, digital power conversion, and embedded signal processing. A Digital Signal Controller (DSC) is a hybrid device that merges the real-time control capabilities of a microcontroller (MCU) with the math throughput of a digital signal processor (DSP). In the product taxonomy, a DSC sits between a general-purpose MCU and a dedicated DSP: it executes control-loop code and fixed-point DSP algorithms on the same core, eliminating the need for a separate DSP plus MCU pair. The dsPIC33F family is Microchip's 16-bit DSC line, positioned above 8-bit PIC MCUs and below 32-bit PIC32 devices. Key features of the DSPIC33FJ256GP510A-E/PT include 256 KB Flash, 30 KB SRAM, 40 MIPS operation at 3.0 V to 3.6 V, an extended temperature range of -40 C to +125 C, and a 100-pin TQFP footprint. The device integrates a 16-bit CPU with a 17x17-bit single-cycle multiplier, a barrel shifter, and a DMA engine, enabling deterministic execution of control algorithms. The 'A' suffix denotes the enhanced dsPIC33FJXXXGPX06A/X08A/X10A revision, which adds advanced analog peripherals and improved migration options across the 64-, 80-, and 100-pin family members. The E/PT ordering code indicates the extended (-40 C to +125 C) temperature grade in the 100-pin TQFP (12x12) package, and the part is listed as AEC-Q100 automotive qualified by distributor data. Typical applications include three-phase motor field-oriented control (FOC), digital power supplies and PFC stages, automotive sensor and actuator control, industrial servo drives, and solar micro-inverters. The 40 MIPS core and hardware multiplier allow current-loop execution well above 10 kHz while leaving CPU headroom for communication stacks. When designing with this device, note that the 100-pin TQFP (12x12) body differs from the 100-pin TQFP (14x14) used by the -E/PF variant; the two are not footprint-compatible despite sharing the same pin count. Verify the land pattern before layout. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Angebot Kontakt
DSPIC33FJ256GP510A-I/PT - 16-bit DSC 40MIPS 256KB Flash | Microchip
DSPIC33FJ256GP510A-I/PT

DSPIC33FJ256GP510A-I/PT - 16-bit DSC 40MIPS 256KB Flash | Microchip

The Microchip Technology DSPIC33FJ256GP510A-I/PT is a 16-bit digital signal controller (DSC) delivering 40 MIPS at 3.3V, with 256KB Flash and 30KB SRAM, housed in a 100-pin TQFP (12x12 mm) package. A digital signal controller combines the computational power of a DSP with the peripheral integration and ease of use of a microcontroller, forming the top tier of the general-purpose (GP) branch of the dsPIC33F family within the broader power-management-by-periphery hierarchy of 16-bit embedded processors. DSCs are the standard choice where both control-loop code and real-time math (filters, transforms, PID) must run on one chip. Key features include a 16-bit dsPIC RISC core at up to 40 MIPS, two on-chip ADC modules configurable as 10-bit/1.1 Msps with four sample-and-hold circuits or 12-bit/500 ksps with one sample-and-hold, and up to 32 analog inputs on 100-pin devices with flexible, independent ADC trigger sources. The dsPIC33FJ256GP510A utilizes Microchip's modified Harvard architecture with DSP engine (40-bit accumulator, 17-bit x 17-bit single-cycle MAC), flexible interrupt structure, and multiple PGECx/PGEDx pin pairs for In-Circuit Serial Programming (ICSP) and debugging via MPLAB tools such as MPLAB Snap and the MPLAB XC-DSC compiler. The A-grade silicon is the current production revision, backward-compatible in code for legacy dsPIC33FJ designs after recompilation. Typical applications include industrial motor control and power conversion, automotive and industrial sensing nodes (Arrow lists the family as AEC-Q100-qualified), audio processing, and general-purpose embedded control in medical and consumer products. Design consideration: pair every VDD/VSS pair with local decoupling and confirm PGECx/PGEDx pairs are routed as matched pairs for programming access. This page synthesizes distributor pricing, drop-in same-footprint alternatives, and practical design notes not found in the manufacturer datasheet.

Angebot Kontakt
DSPIC33FJ256GP710A-E/PF - 16-bit DSC 40 MIPS 256 KB Flash | Microchip
DSPIC33FJ256GP710A-E/PF

DSPIC33FJ256GP710A-E/PF - 16-bit DSC 40 MIPS 256 KB Flash | Microchip

The Microchip DSPIC33FJ256GP710A-E/PF is a 16-bit Digital Signal Controller delivering 40 MIPS core performance with 256 KB of self-programmable Flash and 30 KB of SRAM, housed in a 100-pin 14x14 mm TQFP (PF) package and qualified for the -40C to +125C extended industrial temperature range. A Digital Signal Controller (DSC) combines the deterministic math throughput of a digital signal processor with the rich peripheral integration of a microcontroller, and it sits in the embedded computing hierarchy between general-purpose MCUs and standalone DSPs. Within Microchip's portfolio the dsPIC33F family specifically targets real-time closed-loop control applications, sitting above the PIC24F/PIC24H MCU families and below the dsPIC33E and dsPIC33C high-performance successors. The GP (General Purpose) sub-family inside dsPIC33F is the all-rounder line optimized for general embedded signal processing and motor / power control rather than audio codec pipelines. Key features of the dsPIC33FJ256GP710A include a 16-bit dsPIC33F modified Harvard core with single-cycle MAC and DSP engine instructions, 16-channel 10-bit / 12-bit ADC, multiple PWM generators, two analog comparators, two I2C, two SPI, two UART, an ECAN module, and a parallel master port. A-suffix silicon is the current die revision of the original dsPIC33FJ256GP710, with corrected errata and full manufacturer support through MPLAB X IDE and the MPLAB XC-DSC compiler. Architecturally, the 40 MIPS core pairs a 16-bit ALU with a dedicated DSP engine supporting single-cycle MAC and dual data fetch, enabling real-time control algorithms such as field-oriented motor control, digital filters, and power conversion feedback loops without external co-processors. The GP peripheral set prioritizes general-purpose timers and PWM over the dedicated motor-control PWM of the MC sub-family, and the A revision integrates errata fixes versus the original die. Typical applications include industrial motor drives (PMSM, BLDC, ACIM), digital power supplies (PFC, LLC, full-bridge converters), solar micro-inverters, and automotive body and convenience ECUs where the H-grade sibling enables AEC-Q100 qualification. The 100-pin TQFP package exposes most of the peripheral I/O for high-pinout designs. Design consideration: the device operates from a single 3.0 V to 3.6 V supply, so plan level shifting for 5 V peripherals and respect the 40 MIPS core of the dsPIC33F when computing CPU headroom. Always assign PGECx / PGEDx as paired pins for ICSP and route the analog AVdd / AVss rails with separate decoupling from Vdd / Vss to preserve ADC accuracy. This page synthesizes distributor pricing, drop-in same-package alternatives, extended-temperature substitution guidance, and practical design notes that complement the manufacturer datasheet's full pin-by-pin specification.

Angebot Kontakt
DSPIC33FJ256GP710A-H/PF - 16-bit DSC, 40 MIPS, 256KB Flash | Microchip
DSPIC33FJ256GP710A-H/PF

DSPIC33FJ256GP710A-H/PF - 16-bit DSC, 40 MIPS, 256KB Flash | Microchip

The Microchip Technology DSPIC33FJ256GP710A-H/PF is a 16-bit Digital Signal Controller (DSC) from the dsPIC33F General Purpose family, delivering up to 40 MIPS performance with 256 KB of Flash program memory and 30 KB of SRAM, housed in a 100-pin TQFP (PF) package. The AEC-Q100 qualified IC runs from 3.0 V to 3.6 V and offers 85 general-purpose I/O pins with extensive digital and analog peripherals. A Digital Signal Controller (DSC) is a hybrid device that combines the deterministic compute architecture of a digital signal processor (DSP) with the peripheral integration and control-oriented design of a microcontroller (MCU). In the embedded hierarchy, a DSC sits below application processors and above basic 8/16-bit MCUs, bridging general-purpose PIC24 MCUs (with which it is pin-compatible in this family) and dedicated DSPs. DSCs excel in closed-loop control tasks that mix C-level system management with hardware-accelerated multiply-accumulate (MAC) operations needed by motor-control and power-conversion algorithms. Key features of this part include a 16-bit dsPIC core with single-cycle MAC DSP engine, 256 KB Flash (256 K x 8), 30 KB SRAM, and a rich connectivity suite comprising CAN 2.0B, I2C, SPI, UART/USART, IrDA, and LINbus. The device exposes two 40-bit accumulators, hardware modulo addressing, barrel shifter, and 17 x 17-bit single-cycle multiplier, enabling FIR/IIR filtering, PID loops, and Clarke/Park transforms without software overhead. Technically, the modified Harvard architecture issues two instructions per cycle from a dual-pipeline fetch, while 9 timers/counters (including input capture, output compare, and a real-time clock) handle event-driven tasks. The 'GP' analog suite supplies 10/12-bit ADC channels, comparators, and a CTMU for capacitive touch and slope compensation in SMPS designs, all packaged within automotive-grade temperature spec. Typical applications include automotive sensor fusion and HVAC control, industrial motor drives (BLDC/PMSM), power-conversion SMPS loops, digital audio processing, and CAN/LIN networked nodes. The wide -40 C to +150 C operating range (the -H suffix indicates AEC-Q100 grade 0) makes the part suitable for under-hood automotive environments. Design consideration: place a 10 uF bulk + 0.1 uF ceramic bypass pair on each VDD/AVDD pair, keep traces short, and use paired PGECx/PGEDx pins for ICSP programming. Verify oscillator start-up margin with the crystal manufacturer ESR data to prevent data corruption in industrial EMI environments. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Angebot Kontakt
DSPIC33FJ256GP710A-H/PT - 16-bit 40 MIPs DSC 256KB | Microchip
DSPIC33FJ256GP710A-H/PT

DSPIC33FJ256GP710A-H/PT - 16-bit 40 MIPs DSC 256KB | Microchip

The Microchip Technology DSPIC33FJ256GP710A-H/PT is a 16-bit dsPIC33F general purpose Digital Signal Controller (DSC) delivering 40 MIPs performance with 256KB (256K x 8) FLASH program memory, 30KB of RAM, and a 3.3V supply, housed in a 100-pin TQFP (12x12 mm) package. A Digital Signal Controller combines the control peripherals of a microcontroller with the multiply-accumulate engine of a DSP. Within the power-management hierarchy, the dsPIC33F family sits between standard MCUs and dedicated DSPs: it is a 16-bit microcontroller (PIC24 architecture) with DSP instructions, making it a single-chip solution for motor control and digital power conversion. Key features include a 16-bit RISC dsPIC33F core running at 40 MIPs, 256KB self-programmable FLASH with ECC, 30KB SRAM, and rich connectivity: CANbus, I2C, IrDA, LINbus, SPI, and UART/USART. Analog peripherals and multiple timers plus PWM modules enable closed-loop digital control without external DSP support. Technical depth: the dsPIC33F core executes most instructions in one cycle and includes a 17-bit x 17-bit single-cycle hardware multiplier, dual 40-bit accumulators, and DSP addressing modes. Seamless migration paths exist to PIC24F, PIC24H MCUs and dsPIC30F DSCs in similar packages. The -H/PT variant is specified over an automotive-oriented extended temperature range with 3.3V operation. Typical applications include automotive electronic control units, digital power supplies, industrial motor drives, sensor fusion nodes, and communication gateways using the on-chip CAN module. Design consideration: only matched PGECx/PGEDx pin pairs may be used for ICSP programming (e.g., PGEC2 with PGED2), and multiple voltage-rail domains require attention during in-circuit debugging. This page adds value beyond the datasheet by synthesizing distributor pricing, drop-in alternatives, design notes, and AEO-optimized Q&A in one structured reference.

Angebot Kontakt
DSPIC33FJ256GP710A-I/PF - 16-bit 40 MIPS DSC 256KB Flash TQFP-100 | Microchip
DSPIC33FJ256GP710A-I/PF

DSPIC33FJ256GP710A-I/PF - 16-bit 40 MIPS DSC 256KB Flash TQFP-100 | Microchip

The Microchip Technology DSPIC33FJ256GP710A-I/PF is a 16-bit general-purpose Digital Signal Controller (DSC) delivering up to 40 MIPS from its dsPIC33F core, with 256 KB of Flash program memory and 30 KB of SRAM, housed in a 100-pin TQFP (PF, 14x14 mm) surface-mount package with an industrial -40C to +85C operating range. A Digital Signal Controller combines the deterministic interrupt architecture and peripheral set of a microcontroller with the multiply-accumulate (MAC) DSP engine of a digital signal processor. In the embedded-systems hierarchy, the DSC sits between a general-purpose MCU (such as a PIC18) and a dedicated DSP, making it a natural fit for motor control loops, digital power supplies, and sensor-fusion applications that need both control flow and real-time math in a single chip. Key features include the 16-bit modified Harvard core with two 40-bit accumulators and single-cycle MAC, 256 KB (256K x 8) self-programmable Flash with ECC-style write protection, up to 85 general-purpose I/O pins, and rich connectivity: CAN 2.0B, two UART modules, two I2C ports, two SPI ports, and a DCI codec interface. The analog subsystem provides a 10-bit, 1.1 Msps ADC with up to 32 input channels plus multiple analog comparators. Architecturally, the 'A' revision of the dsPIC33FJ256GP710 family refines the original die for improved manufacturing and provides seamless migration paths to PIC24H MCUs and other dsPIC33F devices in the same footprint. Peripherals are clocked from an on-chip PLL fed by an external crystal or the internal 7.37 MHz FRC oscillator with a fail-safe clock monitor and brown-out reset for safety-critical designs. Typical applications include BLDC and PMSM motor control, digital power conversion (LLC, PFC), industrial sensing, automotive body controllers (when using the -H grade), and embedded control panels requiring CAN bus networking. Design consideration: the 100-pin TQFP requires careful decoupling of all VDD/VSS pairs and a solid ground plane; Flash self-programming during ICSP requires VDD within 3.0 V to 3.6 V to stay in spec. This page adds value beyond the manufacturer datasheet by synthesizing distributor pricing, drop-in same-footprint alternatives across the dsPIC33FJ family, and practical design notes for supply-chain-resilient BOM planning.

Angebot Kontakt
DSPIC33FJ256GP710AT-I/PT - 16-bit DSC 40MIPS 256KB Flash | Microchip
DSPIC33FJ256GP710AT-I/PT

DSPIC33FJ256GP710AT-I/PT - 16-bit DSC 40MIPS 256KB Flash | Microchip

The Microchip Technology DSPIC33FJ256GP710AT-I/PT is a 16-bit Digital Signal Controller (DSC) from the dsPIC33FJ256GP710A family delivering up to 40 MIPS performance, 256KB of Flash program memory, and 30KB of RAM, housed in a 100-pin TQFP (12x12 mm) package rated for industrial temperatures from -40C to +85C at 3.3V operation. A Digital Signal Controller combines the compute architecture of a microcontroller with DSP capabilities such as single-cycle MAC multiply-accumulate and hardware divide support. Within the power-management hierarchy of embedded processors, the dsPIC33F sits between general-purpose 16-bit MCUs (like the PIC24H, with which it is pin compatible) and dedicated DSPs, making it a middle path for real-time control plus signal processing. The dsPIC33F family shares a high degree of compatibility with the dsPIC30F family, allowing migration between device generations as system requirements evolve. Key features include the 16-bit dsPIC core clocked at 40 MHz for 40 MIPS throughput, rich connectivity with CAN, I2C, SPI, and UART modules, 53 general-purpose I/O pins, and In-Circuit Serial Programming (ICSP) via PGECx/PGEDx pin pairs. The device is supported by the MPLAB XC-DSC C/C++ optimizing compiler and MPLAB Snap debugger. Architecture highlights: the modified Harvard pipeline executes most instructions in a single cycle, while hardware DSP multiply-accumulate instructions accelerate filtering, FFT, and control-loop math without software libraries. Dual-source Flash variants (the AT suffix denotes the A-version silicon with tape-and-reel ordering) simplify supply continuity. Typical applications include digital power supplies, motor control and PFC stages, industrial automation nodes with CAN networking, and audio or sensor signal-processing pipelines where 40 MIPS and on-chip DSP math remove the need for a second processor. Design consideration: pair multiple decoupling capacitors on the 3.3V rails and route PGEC/PGED pairs carefully for debug access; only paired PGECx/PGEDx pins may be used together for ICSP. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Angebot Kontakt
DSPIC33FJ256GP710T-I/PT - 16-bit 40 MIPS DSC 256KB Flash | Microchip
DSPIC33FJ256GP710T-I/PT

DSPIC33FJ256GP710T-I/PT - 16-bit 40 MIPS DSC 256KB Flash | Microchip

The Microchip DSPIC33FJ256GP710T-I/PT is a 16-bit general-purpose Digital Signal Controller (DSC) delivering 40 MIPS at 40 MHz, with 256 KB of Flash program memory and 30 KB of SRAM, housed in a 100-pin TQFP (12x12 mm) package. It operates from a 3.0 V to 3.6 V supply and over an industrial temperature range of -40C to +85C. A Digital Signal Controller combines the compute architecture of a microcontroller with the math throughput of a DSP. Within the power-management hierarchy of embedded semiconductors, the dsPIC33F family sits between general-purpose MCUs (such as PIC24) and dedicated DSPs, integrating a DSP engine with multiply-accumulate (MAC) instructions, high-speed ADC, PWM, and comparators on a single chip. Key features include the 16-bit modified Harvard architecture with 16 W x 16-bit multiply and 32/16-bit divide support, 85 general-purpose I/O, 35 I/O ports per digchips listing data, up to four high-speed comparators with direct ADC connection, and seamless migration options to PIC24F, PIC24H MCUs and dsPIC30F DSCs in similar packages per the Microchip product page. Flash program memory is 256 KB (256K x 8), SRAM is 30 KB (30720 bytes per Mouser listing), and the device is supplied in Tape and Reel packaging (suffix T). Technically, the dsPIC33F core runs its instruction and clock system at 40 MHz for 40 MIPS throughput, supported by an on-chip oscillator system and a rich interrupt architecture suited to deterministic real-time control loops. Peripherals typically include UART, SPI, I2C, ECAN, and a high-speed 10/12-bit ADC, enabling closed-loop control with sampling and computation in a single cycle-accurate pipeline. Typical applications include digital power supplies, motor control inverters, sensor signal conditioning and industrial automation nodes, all of which benefit from the combination of DSP math throughput and MCU peripheral integration. The general-purpose (GP) variant is preferred where broad analog and communication peripherals are needed rather than the motor-control (MC) focused PWM sets. A key design consideration: the device supports multiple PGECx/PGEDx pin pairs for ICSP programming, but each pair must be used as a matched pair - if PGEC2 carries ICSPCLK, ICSPDAT must connect to PGED2, as documented by Microchip development resources. This page synthesizes distributor listings, drop-in family alternatives, and design guidance not consolidated in the manufacturer datasheet alone. Prices shown are estimated as of 2026-09-27 and should be confirmed at checkout.

Angebot Kontakt
DSPIC33FJ256MC510-I/PT - 16-Bit DSC 40 MIPS 256KB Flash | Microchip
DSPIC33FJ256MC510-I/PT

DSPIC33FJ256MC510-I/PT - 16-Bit DSC 40 MIPS 256KB Flash | Microchip

The Microchip Technology DSPIC33FJ256MC510-I/PT is a 16-bit dsPIC33F digital signal controller (DSC) delivering 40 MIPS performance with 256KB (256K x 8) of FLASH program memory and 30KB of RAM, housed in a 100-pin TQFP (12x12 mm) package rated for -40C to +85C operation. A digital signal controller combines the deterministic control of a microcontroller with the mathematical throughput of a DSP on a single die. In the semiconductor hierarchy, the DSC sits between a general-purpose MCU and a dedicated DSP: it executes microcontroller-style C code and interrupt handling while also providing hardware MAC, divide, and barrel-shift instructions for control-loop mathematics. The dsPIC33F family belongs to Microchip's broader 16-bit architecture, with seamless migration paths to PIC24 MCUs and dsPIC30F DSCs in similar packages. Key features include the modified Harvard 16-bit core with DSP engine, single-cycle MAC, 40 MIPS at 3.3V operation, motor-control specific peripherals (advanced PWM with dead-time insertion and ADC with simultaneous sampling), plus UART, SPI, I2C, ECAN, and multiple 16-bit timers. Industrial temperature qualification (-40C to +85C, suffix -I) suits factory-floor designs. Architecturally, the dsPIC33FJ256MC510 pairs its 256KB self-programming FLASH with 30KB SRAM and a rich interrupt vector table. The MC (Motor Control) variant adds complementary-output PWM channels and fast ADC conversion rates essential for field-oriented motor control and digital power conversion. Typical applications include brushless DC and PMSM motor drives, digital power supplies (PFC, LLC), industrial automation nodes, and sensor signal processing requiring DSP-grade math. Design consideration: all VDD/VSS pairs must be connected, and PGECx/PGEDx pairs must be used as matched pairs for In-Circuit Serial Programming. This page synthesizes drop-in alternatives, cross-reference options, pricing context, and practical design notes not found in the manufacturer datasheet.

Angebot Kontakt
DSPIC33FJ256MC510AT-I/PF - 16-bit 40 MIPS DSC 256KB Flash | Microchip
DSPIC33FJ256MC510AT-I/PF

DSPIC33FJ256MC510AT-I/PF - 16-bit 40 MIPS DSC 256KB Flash | Microchip

The Microchip Technology DSPIC33FJ256MC510AT-I/PF is a 16-bit digital signal controller (DSC) delivering up to 40 MIPS performance with 256KB of Flash program memory, 16KB of RAM, and a 3V to 3.6V supply range, housed in a 100-lead TQFP (14x14 mm, 0.5 mm pitch) package. A digital signal controller combines the computational architecture of a microcontroller (MCU) with the numeric acceleration of a digital signal processor (DSP). In the product hierarchy, the dsPIC33F family sits between general-purpose 16-bit PIC24 MCUs and dedicated DSPs, offering a RISC core modified with DSP instructions, dual operand fetch, and a hardware multiply-accumulate unit. This makes DSCs ideal for closed-loop control loops that need both deterministic real-time behavior and math-intensive algorithms. Key features of the DSPIC33FJ256MC510AT-I/PF include the 16-bit dsPIC33F RISC core rated at 40 MIPS, 256KB (256K x 8) of self-programmable Flash, 16KB of SRAM, 8 DMA channels, 9 timers, and 4 serial I/O modules. The MC (Motor Control) variant integrates dedicated peripherals for three-phase inverter drive, making it a strong fit for field-oriented control firmware. Architecturally, the CMOS device employs a 3-stage pipeline with separate program and data buses (Harvard architecture), single-cycle MAC operations, and support for DSP multiply, divide, and bit-manipulation instructions. The core clock reaches 40 MHz, corresponding to the 40 MIPS rating. Typical applications include brushless DC (BLDC) motor drive, single- and three-phase induction motor control, switched reluctance motor systems, uninterruptible power supplies (UPS), and digital power conversion - use cases Microchip explicitly targets with the dsPIC33F MC family. Digital filtering and sensor fusion tasks in industrial automation also benefit from the on-chip DSP engine. Design consideration: the 3V-3.6V supply window requires a clean LDO or buck-derived rail; leave adequate decoupling on all VDD/VDDCORE pairs, and verify Flash programming voltage requirements during in-circuit programming with tools like PICkit or ICD headers. This page synthesizes distributor pricing, drop-in alternatives, pin-package options, and motor-control design notes not consolidated in the manufacturer datasheet.

Angebot Kontakt
DSPIC33FJ256MC510T-I/PF - 16-bit DSC 40MIPS 256KB Flash | Microchip
DSPIC33FJ256MC510T-I/PF

DSPIC33FJ256MC510T-I/PF - 16-bit DSC 40MIPS 256KB Flash | Microchip

The Microchip Technology DSPIC33FJ256MC510T-I/PF is a 16-bit digital signal controller (DSC) from the dsPIC33F Motor Control family, delivering 40 MIPS performance with 256KB of FLASH program memory and 16KB of RAM, housed in a 100-pin TQFP (14x14 mm) lead-free plastic package. A digital signal controller combines the computational power of a digital signal processor (DSP) with the peripheral integration and control flexibility of a microcontroller (MCU). In the system hierarchy, the dsPIC33F sits between general-purpose MCUs and dedicated DSPs: it executes microcontroller-style deterministic interrupt-driven control loops while providing hardware DSP multiply-accumulate instructions for filtering and transformation tasks. This makes DSCs the preferred choice for closed-loop power conversion and motor drive systems. Key features of the DSPIC33FJ256MC510T-I/PF include a 16-bit dsPIC core running at up to 40 MIPS from a 3.0V to 3.6V supply, 35 I/O pins, and motor-control-centric peripherals: high-speed PWM modules, up to four high-speed comparators with direct connections, and a high-speed ADC for simultaneous multi-channel current sampling. Connectivity covers CANbus, I2C, IrDA, LINbus, SPI, and UART/USART, enabling integration into automotive-style and industrial networks. Architecturally, the dsPIC33F core pairs a 16-bit modified Harvard pipeline with two 40-bit accumulators and hardware DSP instructions, allowing single-cycle MAC operations at the full 40 MIPS clock rate. The flash-based program memory supports in-circuit self-programming, and the device offers seamless migration paths to PIC24 MCUs and dsPIC30F DSCs in similar packages, protecting software and hardware investment. Typical applications include brushless DC motor drives, single- and 3-phase induction motor control, switched reluctance motor systems, and digital power supplies such as LLC and PFC stages. The high-speed PWM, ADC, and comparator set maps directly onto sensorless FOC control loops. Design consideration: operate the device within its 3.0V to 3.6V supply window and budget decoupling per supply pin pair; the 100-pin TQFP with 0.5 mm pitch requires careful PCB land-pattern compliance for reliable assembly. This page synthesizes distributor pricing, drop-in alternatives, pinout guidance, and practical design notes not found in the manufacturer datasheet, providing added selection value beyond the raw specification table.

Angebot Kontakt
DSPIC33FJ256MC710-I/PT - 40 MIPS 16-bit DSC, 256KB Flash | Microchip
DSPIC33FJ256MC710-I/PT

DSPIC33FJ256MC710-I/PT - 40 MIPS 16-bit DSC, 256KB Flash | Microchip

The Microchip Technology DSPIC33FJ256MC710-I/PT is a high-performance 16-bit Digital Signal Controller (DSC) delivering 40 MIPS core throughput with 256 KB of self-programmable Flash program memory, housed in a 100-pin TQFP (12x12 mm) package rated for the industrial -40C to +85C temperature range. A Digital Signal Controller (DSC) is a hybrid device that combines the deterministic interrupt response and peripheral integration of a microcontroller (MCU) with the single-cycle multiply-accumulate (MAC) throughput of a digital signal processor (DSP). In the embedded-control hierarchy, a DSC sits between general-purpose 16-bit MCUs (such as the PIC24 family) and standalone DSPs, making it the de-facto choice for high-bandwidth control loops such as field-oriented motor control, digital power conversion, and sensor-fusion front ends. Key features of the DSPIC33FJ256MC710-I/PT include a 40 MIPS modified-Harvard 16-bit core with DSP engine extensions (17-bit x 17-bit single-cycle multiplier and 40-bit accumulator), an 8-channel DMA controller, dual 10-bit/12-bit-configurable ADC modules supporting simultaneous sampling, motor-control PWM with dedicated time bases, an ECAN interface, and self-programmable Flash for in-field firmware upgrades. Architecturally, the dsPIC33F core integrates a 24-bit instruction word with 16-bit data paths, enabling both 16-bit MCU and DSP instruction sets in one binary-compatible ISA. Seamless migration paths to PIC24 MCUs and dsPIC30F DSCs in similar 100-pin TQFP packages are supported per the Microchip product page, allowing teams to scale memory or peripheral counts without redesigning the PCB. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous (PMSM) motor drives, single- and three-phase induction motor control, switched-reluctance drives, digital switch-mode power supplies, and industrial sensor-front-end processing. The motor-control PWM (with complementary outputs and programmable dead time) and dual simultaneous-sampling ADCs make this DSC particularly well-suited to sensorless field-oriented control (FOC). Multiple PGECx / PGEDx pin pairs are exposed for ICSP programming and debugging; the pair used must remain consistent, and every VDD / VSS pin must be connected, otherwise programming may fail. This page synthesizes distributor pricing, drop-in 100-pin TQFP alternatives, and practical design notes not consolidated in the manufacturer datasheet.

Angebot Kontakt
DSPIC33FJ256MC710A-E/PF - 16-bit DSC 40MIPS 256KB Flash | Microchip
DSPIC33FJ256MC710A-E/PF

DSPIC33FJ256MC710A-E/PF - 16-bit DSC 40MIPS 256KB Flash | Microchip

The Microchip Technology DSPIC33FJ256MC710A-E/PF is a 16-bit digital signal controller (DSC) delivering 40 MIPS performance from 256 KB flash and 30 KB SRAM, housed in a 100-pin TQFP (14x14 mm) package rated for -40C to +125C extended industrial operation. The part is the -E (extended) temperature variant of the MC710A motor-control family, supplied in tray packaging for design and production use. A digital signal controller combines the compute throughput of a DSP with the peripheral integration and deterministic control of a microcontroller. Within the embedded-classification hierarchy, the dsPIC33F family sits above basic MCUs and below standalone DSPs, offering single-cycle MAC, hardware multiply, and divide alongside flash-based code storage. DSCs of this class are the workhorse architecture for digitally controlled power conversion and motion systems, where deterministic interrupt response and DSP-grade math are both mandatory. Key differentiators of this part include the A-silicon revision of the MC710 family, dedicated motor-control PWM modules with complementary outputs and dead-time insertion, fault inputs, a high-speed 10-bit ADC capable of 1.1 Msps, two ECAN interfaces for industrial networking, and quadrature encoder interfaces for closed-loop motion feedback. The 256 KB flash supports complex field-oriented control (FOC) algorithms with headroom for CANopen stacks and bootloaders. Architecturally, the dsPIC33F core executes an optimized C-compiler-friendly instruction set with two 40-bit accumulators, hardware modulo addressing, and bit-reversed addressing for FFTs. The MC variant tailors peripherals toward digital power: eight PWM generators with flexible trigger sources, analog comparators, and a fast ADC that can be triggered synchronously by the PWM for precise current sampling. Typical applications include brushless DC (BLDC), permanent-magnet synchronous (PMSM), single/three-phase induction, and switched reluctance motor drives, plus digital power supplies, solar inverters, and uninterruptible power supplies (UPS). On-chip ECAN makes it a natural fit for automotive-adjacent and industrial networked drives where CANopen or DeviceNet stacks are deployed. Design consideration: the 3.3 V core requires a clean supply with proper decoupling on all VDD and VDDCORE pins, and the 100-pin TQFP exposed pad must be soldered with adequate PCB copper for sustained 40 MIPS operation at +125C ambient. Use Microchip's MPLAB X IDE with the XC16 compiler for code development. This page synthesizes distributor pricing, drop-in same-package family alternatives, and practical design notes not found in the manufacturer datasheet, verified against Mouser, DigiKey, LCSC and Microchip sources as of 2026-10-07.

Angebot Kontakt
DSPIC33FJ256MC710A-H/PF - 16-bit DSC 256KB Flash 40MIPS | Microchip
DSPIC33FJ256MC710A-H/PF

DSPIC33FJ256MC710A-H/PF - 16-bit DSC 256KB Flash 40MIPS | Microchip

The Microchip Technology DSPIC33FJ256MC710A-H/PF is a 16-bit dsPIC33F digital signal controller (DSC) delivering up to 40 MIPS performance, 256KB (256K x 8) FLASH program memory, 30KB SRAM, and AEC-Q100 qualification, housed in a 100-pin TQFP (14x14x1 mm) package. A digital signal controller combines the compute architecture of a microcontroller with DSP-engine features such as a single-cycle MAC, hardware divide, and DSP multiply instructions. Within the power-management hierarchy, a DSC sits between general-purpose MCUs and dedicated DSPs, making the dsPIC33F family a bridge product that Microchip positions for seamless migration to PIC24 MCUs and dsPIC30F DSCs in similar packages. Key differentiating features include motor-control peripherals (PWM for brushless DC, single/3-phase induction and switched-reluctance motors), a broad connectivity suite covering CANbus, I2C, IrDA, LINbus, SPI, and UART/USART, and the -H temperature grade rated from -40C to +150C per distributor data. The AEC-Q100 qualification targets automotive and harsh industrial deployments. The 16-bit dsPIC core executes an optimized C compiler-friendly instruction set with DSP extensions. Program flash of 256KB provides headroom for complex field-oriented control (FOC) algorithms, while 30KB SRAM accommodates control loops, communication buffers, and telemetry. Analog integration and motor-control PWM peripherals reduce external component count in drive designs. Typical applications include BLDC and PMSM motor drives, industrial automation nodes using CAN, automotive body and powertrain auxiliaries, digital power supplies, and UPS/solar inverter control where deterministic 16-bit control loops and DSP math are required. Design consideration: the -H grade's 150C rating reduces allowable current and timing margins at the extremes; verify per the manufacturer datasheet electrical specifications and confirm whether your board supports the 40 MIPS operating range (DigiKey lists 20 MIPS for this ordering code). This page synthesizes distributor pricing, drop-in alternatives within the same 100-TQFP footprint, and practical design notes not found in the manufacturer datasheet.

Angebot Kontakt