ADM4851ARZ vs ADM4857AR Vergleich
Detaillierter Direktvergleich von ADM4851ARZ von Analog Devices und ADM4857AR von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Analog Devices
ADM4851ARZ - 500 kbps Half-Duplex RS-485 Transceiver | Analog Devices
ADM4851ARZ ✓ AktivSpezifikationsvergleich
| Parameter | ADM4851ARZ | ADM4857AR |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Obsolete |
| Product Type | RS-485/RS-422 differential line transceiver | RS-485/RS-422 differential line transceiver |
| Versorgungsspannung | 5 V | 5 V |
| Maximum Data Rate | 500 kbps | [DATA_NEEDED: maximum data rate] |
| Duplex Mode | Half-duplex | — |
| Supported Standards | EIA RS-485 and EIA RS-422 | RS-485 and RS-422 |
| Driver Configuration | 1/1 transceiver | — |
| Slew Rate | Limited | — |
| Signal Type | Balanced differential | — |
| Gehäuse | 8-pin SOIC | 8-lead SOIC |
| Montageart | Surface mount | Surface mount |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Versorgungsstrom | [DATA_NEEDED: supply current] | — |
| Receiver Common-Mode Voltage Range | [DATA_NEEDED: receiver common-mode voltage range] | — |
| Differential Input Sensitivity | [DATA_NEEDED: differential input sensitivity] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Abschaltstrom | [DATA_NEEDED: shutdown current] | — |
| Lead Pitch | [DATA_NEEDED: lead pitch] | — |
| RoHS-Status | unknown | [DATA_NEEDED: RoHS compliance] |
| REACH Status | unknown | [DATA_NEEDED: REACH compliance] |
| AEC-Q100 Qualification | not_applicable | [DATA_NEEDED: AEC-Q100 qualification] |
| Communication Mode | — | Half-duplex and full-duplex |
| Network Topology | — | Multipoint bus |
| Output Slew Rate | — | [DATA_NEEDED: maximum and minimum slew rates] |
| Differential Driver Output | — | [DATA_NEEDED: differential output voltage] |
| Receiver Input Range | — | [DATA_NEEDED: differential receiver input voltage] |
| Driver Enable Control | — | [DATA_NEEDED: enable pin polarity and control configuration] |
| Receiver Output Logic | — | [DATA_NEEDED: receiver output voltage levels] |
| Terminal Configuration | — | Differential bus input and output |