ADM4851ARZ vs ADM4857AR So sánh
So sánh chi tiết song song của ADM4851ARZ bằng Analog Devices và ADM4857AR bằng Analog Devices. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Analog Devices
ADM4851ARZ - 500 kbps Half-Duplex RS-485 Transceiver | Analog Devices
ADM4851ARZ ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | ADM4851ARZ | ADM4857AR |
|---|---|---|
| Thương hiệu | Analog Devices | Analog Devices |
| Danh mục | Interface ICs | Interface ICs |
| Trạng thái vòng đời | Hoạt động | Obsolete |
| Product Type | RS-485/RS-422 differential line transceiver | RS-485/RS-422 differential line transceiver |
| Điện áp cung cấp | 5 V | 5 V |
| Maximum Data Rate | 500 kbps | [DATA_NEEDED: maximum data rate] |
| Duplex Mode | Half-duplex | — |
| Supported Standards | EIA RS-485 and EIA RS-422 | RS-485 and RS-422 |
| Driver Configuration | 1/1 transceiver | — |
| Slew Rate | Limited | — |
| Signal Type | Balanced differential | — |
| Hộp | 8-pin SOIC | 8-lead SOIC |
| Kiểu lắp đặt | Surface mount | Surface mount |
| Khoảng nhiệt độ hoạt động | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Điện áp cung cấp | [DATA_NEEDED: supply current] | — |
| Receiver Common-Mode Voltage Range | [DATA_NEEDED: receiver common-mode voltage range] | — |
| Differential Input Sensitivity | [DATA_NEEDED: differential input sensitivity] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Điện áp tắt | [DATA_NEEDED: shutdown current] | — |
| Lead Pitch | [DATA_NEEDED: lead pitch] | — |
| Trạng thái RoHS | unknown | [DATA_NEEDED: RoHS compliance] |
| REACH Status | unknown | [DATA_NEEDED: REACH compliance] |
| AEC-Q100 Qualification | not_applicable | [DATA_NEEDED: AEC-Q100 qualification] |
| Communication Mode | — | Half-duplex and full-duplex |
| Network Topology | — | Multipoint bus |
| Output Slew Rate | — | [DATA_NEEDED: maximum and minimum slew rates] |
| Differential Driver Output | — | [DATA_NEEDED: differential output voltage] |
| Receiver Input Range | — | [DATA_NEEDED: differential receiver input voltage] |
| Driver Enable Control | — | [DATA_NEEDED: enable pin polarity and control configuration] |
| Receiver Output Logic | — | [DATA_NEEDED: receiver output voltage levels] |
| Terminal Configuration | — | Differential bus input and output |