ADM4851ARZ vs ADM4857AR तुलना
विस्तृत दोनों ओर की तुलना ADM4851ARZ द्वारा Analog Devices और ADM4857AR द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Analog Devices
ADM4851ARZ - 500 kbps Half-Duplex RS-485 Transceiver | Analog Devices
ADM4851ARZ ✓ सक्रियविशेषता तुलना
| पैरामीटर | ADM4851ARZ | ADM4857AR |
|---|---|---|
| ब्रांड | Analog Devices | Analog Devices |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | Obsolete |
| Product Type | RS-485/RS-422 differential line transceiver | RS-485/RS-422 differential line transceiver |
| सप्लाई वोल्टेज | 5 V | 5 V |
| Maximum Data Rate | 500 kbps | [DATA_NEEDED: maximum data rate] |
| Duplex Mode | Half-duplex | — |
| Supported Standards | EIA RS-485 and EIA RS-422 | RS-485 and RS-422 |
| Driver Configuration | 1/1 transceiver | — |
| Slew Rate | Limited | — |
| Signal Type | Balanced differential | — |
| पैकेज | 8-pin SOIC | 8-lead SOIC |
| माउंटिंग प्रकार | Surface mount | Surface mount |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| सप्लाई करंट | [DATA_NEEDED: supply current] | — |
| Receiver Common-Mode Voltage Range | [DATA_NEEDED: receiver common-mode voltage range] | — |
| Differential Input Sensitivity | [DATA_NEEDED: differential input sensitivity] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| शटडाउन करंट | [DATA_NEEDED: shutdown current] | — |
| Lead Pitch | [DATA_NEEDED: lead pitch] | — |
| RoHS स्थिति | unknown | [DATA_NEEDED: RoHS compliance] |
| REACH Status | unknown | [DATA_NEEDED: REACH compliance] |
| AEC-Q100 Qualification | not_applicable | [DATA_NEEDED: AEC-Q100 qualification] |
| Communication Mode | — | Half-duplex and full-duplex |
| Network Topology | — | Multipoint bus |
| Output Slew Rate | — | [DATA_NEEDED: maximum and minimum slew rates] |
| Differential Driver Output | — | [DATA_NEEDED: differential output voltage] |
| Receiver Input Range | — | [DATA_NEEDED: differential receiver input voltage] |
| Driver Enable Control | — | [DATA_NEEDED: enable pin polarity and control configuration] |
| Receiver Output Logic | — | [DATA_NEEDED: receiver output voltage levels] |
| Terminal Configuration | — | Differential bus input and output |