ADM4851ARZ vs ADM4857AR Karşılaştırma
Ayrıntılı yan yana karşılaştırma ADM4851ARZ tarafından Analog Devices ve ADM4857AR tarafından Analog DevicesAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Analog Devices
ADM4851ARZ - 500 kbps Half-Duplex RS-485 Transceiver | Analog Devices
ADM4851ARZ ✓ AktifÖzellik Karşılaştırması
| Parametre | ADM4851ARZ | ADM4857AR |
|---|---|---|
| Marka | Analog Devices | Analog Devices |
| Kategori | Interface ICs | Interface ICs |
| Yaşam Döngüsü Durumu | Aktif | Obsolete |
| Product Type | RS-485/RS-422 differential line transceiver | RS-485/RS-422 differential line transceiver |
| Besleme Gerilimi | 5 V | 5 V |
| Maximum Data Rate | 500 kbps | [DATA_NEEDED: maximum data rate] |
| Duplex Mode | Half-duplex | — |
| Supported Standards | EIA RS-485 and EIA RS-422 | RS-485 and RS-422 |
| Driver Configuration | 1/1 transceiver | — |
| Slew Rate | Limited | — |
| Signal Type | Balanced differential | — |
| Paket | 8-pin SOIC | 8-lead SOIC |
| Montaj Türü | Surface mount | Surface mount |
| İşletim Sıcaklığı Aralığı | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Besleme Akımı | [DATA_NEEDED: supply current] | — |
| Receiver Common-Mode Voltage Range | [DATA_NEEDED: receiver common-mode voltage range] | — |
| Differential Input Sensitivity | [DATA_NEEDED: differential input sensitivity] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| Kapatma Akımı | [DATA_NEEDED: shutdown current] | — |
| Lead Pitch | [DATA_NEEDED: lead pitch] | — |
| RoHS Durumu | unknown | [DATA_NEEDED: RoHS compliance] |
| REACH Status | unknown | [DATA_NEEDED: REACH compliance] |
| AEC-Q100 Qualification | not_applicable | [DATA_NEEDED: AEC-Q100 qualification] |
| Communication Mode | — | Half-duplex and full-duplex |
| Network Topology | — | Multipoint bus |
| Output Slew Rate | — | [DATA_NEEDED: maximum and minimum slew rates] |
| Differential Driver Output | — | [DATA_NEEDED: differential output voltage] |
| Receiver Input Range | — | [DATA_NEEDED: differential receiver input voltage] |
| Driver Enable Control | — | [DATA_NEEDED: enable pin polarity and control configuration] |
| Receiver Output Logic | — | [DATA_NEEDED: receiver output voltage levels] |
| Terminal Configuration | — | Differential bus input and output |