ADM4851ARZ vs ADM4857AR 비교
다음의 상세 나란히 비교: ADM4851ARZ 제조: Analog Devices 및 ADM4857AR 제조: Analog Devices. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
Analog Devices
ADM4851ARZ - 500 kbps Half-Duplex RS-485 Transceiver | Analog Devices
ADM4851ARZ ✓ 활성사양 비교
| 파라미터 | ADM4851ARZ | ADM4857AR |
|---|---|---|
| 브랜드 | Analog Devices | Analog Devices |
| 카테고리 | Interface ICs | Interface ICs |
| 수명 주기 상태 | 활성 | Obsolete |
| Product Type | RS-485/RS-422 differential line transceiver | RS-485/RS-422 differential line transceiver |
| 공급 전압 | 5 V | 5 V |
| Maximum Data Rate | 500 kbps | [DATA_NEEDED: maximum data rate] |
| Duplex Mode | Half-duplex | — |
| Supported Standards | EIA RS-485 and EIA RS-422 | RS-485 and RS-422 |
| Driver Configuration | 1/1 transceiver | — |
| Slew Rate | Limited | — |
| Signal Type | Balanced differential | — |
| 패키지 | 8-pin SOIC | 8-lead SOIC |
| 실장 유형 | Surface mount | Surface mount |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| 공급 전류 | [DATA_NEEDED: supply current] | — |
| Receiver Common-Mode Voltage Range | [DATA_NEEDED: receiver common-mode voltage range] | — |
| Differential Input Sensitivity | [DATA_NEEDED: differential input sensitivity] | — |
| Driver Output Current | [DATA_NEEDED: driver output current] | — |
| 셧다운 전류 | [DATA_NEEDED: shutdown current] | — |
| Lead Pitch | [DATA_NEEDED: lead pitch] | — |
| RoHS 상태 | unknown | [DATA_NEEDED: RoHS compliance] |
| REACH Status | unknown | [DATA_NEEDED: REACH compliance] |
| AEC-Q100 Qualification | not_applicable | [DATA_NEEDED: AEC-Q100 qualification] |
| Communication Mode | — | Half-duplex and full-duplex |
| Network Topology | — | Multipoint bus |
| Output Slew Rate | — | [DATA_NEEDED: maximum and minimum slew rates] |
| Differential Driver Output | — | [DATA_NEEDED: differential output voltage] |
| Receiver Input Range | — | [DATA_NEEDED: differential receiver input voltage] |
| Driver Enable Control | — | [DATA_NEEDED: enable pin polarity and control configuration] |
| Receiver Output Logic | — | [DATA_NEEDED: receiver output voltage levels] |
| Terminal Configuration | — | Differential bus input and output |