ADM485ARZ vs ADM485AR Vergleich
Detaillierter Direktvergleich von ADM485ARZ von Analog Devices und ADM485AR von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Analog Devices
ADM485ARZ - 5V 5Mbps Half-Duplex RS-485/RS-422 Transceiver | Analog Devices (Tape & Reel)
ADM485ARZ ✓ AktivSpezifikationsvergleich
| Parameter | ADM485ARZ | ADM485AR |
|---|---|---|
| Marke | Analog Devices | Analog Devices |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Type | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Versorgungsspannung | 5 V (single supply) | 5 V |
| Datenrate | 5 Mbps (max) | — |
| Receiver Hysteresis | [DATA_NEEDED: receiver hysteresis] | — |
| Common-Mode Range | -7 V to +12 V | — |
| Driver Differential Output | [DATA_NEEDED: VOD min/max] | — |
| Betriebstemperaturbereich | -40 C to +85 C | [DATA_NEEDED: operating temperature range] |
| Gehäuse | SOIC-8 (SO-8) / SO-8 | 8-pin SOIC |
| Montageart | Surface Mount | [DATA_NEEDED: surface-mount or through-hole mounting] |
| ESD Protection | [DATA_NEEDED: ESD HBM rating] | [DATA_NEEDED: ESD protection rating] |
| RoHS-Status | Compliant | — |
| REACH Status | Unaffected | — |
| MSL-Level | 1 (Unlimited) | — |
| Compliance | ROHS3 Compliant | — |
| Enable Pins | Yes (DE driver enable, RE receiver enable, active-low/GPIO logic) | — |
| Product Type | — | Differential line transceiver |
| Supported Standards | — | EIA RS-485 and RS-422 |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Communication Mode | — | High-speed bidirectional |
| Bus Architecture | — | Multipoint balanced transmission line |
| Driver and Receiver Enable | — | Driver and receiver can be enabled |
| Signal Type | — | Differential balanced signaling |
| Logic Interface | — | [DATA_NEEDED: logic input and output voltage levels] |
| Maximum Data Rate | — | [DATA_NEEDED: maximum data rate] |
| Differential Driver Output | — | [DATA_NEEDED: differential output voltage and current] |
| Receiver Sensitivity | — | [DATA_NEEDED: receiver sensitivity] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| RoHS | — | unknown |
| REACH | — | unknown |
| AEC-Q100 | — | unknown |