ADM485ARZ vs ADM485AR Comparación
Comparación detallada lado a lado de ADM485ARZ por Analog Devices y ADM485AR por Analog Devices. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Analog Devices
ADM485ARZ - 5V 5Mbps Half-Duplex RS-485/RS-422 Transceiver | Analog Devices (Tape & Reel)
ADM485ARZ ✓ ActivoComparación de especificaciones
| Parámetro | ADM485ARZ | ADM485AR |
|---|---|---|
| Marca | Analog Devices | Analog Devices |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Activo | Activo |
| Type | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Tensión de alimentación | 5 V (single supply) | 5 V |
| Velocidad de datos | 5 Mbps (max) | — |
| Receiver Hysteresis | [DATA_NEEDED: receiver hysteresis] | — |
| Common-Mode Range | -7 V to +12 V | — |
| Driver Differential Output | [DATA_NEEDED: VOD min/max] | — |
| Rango de temperatura de funcionamiento | -40 C to +85 C | [DATA_NEEDED: operating temperature range] |
| Encapsulado | SOIC-8 (SO-8) / SO-8 | 8-pin SOIC |
| Tipo de montaje | Surface Mount | [DATA_NEEDED: surface-mount or through-hole mounting] |
| ESD Protection | [DATA_NEEDED: ESD HBM rating] | [DATA_NEEDED: ESD protection rating] |
| Estado RoHS | Compliant | — |
| REACH Status | Unaffected | — |
| Nivel MSL | 1 (Unlimited) | — |
| Compliance | ROHS3 Compliant | — |
| Enable Pins | Yes (DE driver enable, RE receiver enable, active-low/GPIO logic) | — |
| Product Type | — | Differential line transceiver |
| Supported Standards | — | EIA RS-485 and RS-422 |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Communication Mode | — | High-speed bidirectional |
| Bus Architecture | — | Multipoint balanced transmission line |
| Driver and Receiver Enable | — | Driver and receiver can be enabled |
| Signal Type | — | Differential balanced signaling |
| Logic Interface | — | [DATA_NEEDED: logic input and output voltage levels] |
| Maximum Data Rate | — | [DATA_NEEDED: maximum data rate] |
| Differential Driver Output | — | [DATA_NEEDED: differential output voltage and current] |
| Receiver Sensitivity | — | [DATA_NEEDED: receiver sensitivity] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| RoHS | — | unknown |
| REACH | — | unknown |
| AEC-Q100 | — | unknown |