ADM485ARZ vs ADM485AR तुलना
विस्तृत दोनों ओर की तुलना ADM485ARZ द्वारा Analog Devices और ADM485AR द्वारा Analog Devices. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
Analog Devices
ADM485ARZ - 5V 5Mbps Half-Duplex RS-485/RS-422 Transceiver | Analog Devices (Tape & Reel)
ADM485ARZ ✓ सक्रियविशेषता तुलना
| पैरामीटर | ADM485ARZ | ADM485AR |
|---|---|---|
| ब्रांड | Analog Devices | Analog Devices |
| श्रेणी | Interface ICs | Interface ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Type | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| सप्लाई वोल्टेज | 5 V (single supply) | 5 V |
| डेटा दर | 5 Mbps (max) | — |
| Receiver Hysteresis | [DATA_NEEDED: receiver hysteresis] | — |
| Common-Mode Range | -7 V to +12 V | — |
| Driver Differential Output | [DATA_NEEDED: VOD min/max] | — |
| ऑपरेटिंग तापमान रेंज | -40 C to +85 C | [DATA_NEEDED: operating temperature range] |
| पैकेज | SOIC-8 (SO-8) / SO-8 | 8-pin SOIC |
| माउंटिंग प्रकार | Surface Mount | [DATA_NEEDED: surface-mount or through-hole mounting] |
| ESD Protection | [DATA_NEEDED: ESD HBM rating] | [DATA_NEEDED: ESD protection rating] |
| RoHS स्थिति | Compliant | — |
| REACH Status | Unaffected | — |
| MSL स्तर | 1 (Unlimited) | — |
| Compliance | ROHS3 Compliant | — |
| Enable Pins | Yes (DE driver enable, RE receiver enable, active-low/GPIO logic) | — |
| Product Type | — | Differential line transceiver |
| Supported Standards | — | EIA RS-485 and RS-422 |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Communication Mode | — | High-speed bidirectional |
| Bus Architecture | — | Multipoint balanced transmission line |
| Driver and Receiver Enable | — | Driver and receiver can be enabled |
| Signal Type | — | Differential balanced signaling |
| Logic Interface | — | [DATA_NEEDED: logic input and output voltage levels] |
| Maximum Data Rate | — | [DATA_NEEDED: maximum data rate] |
| Differential Driver Output | — | [DATA_NEEDED: differential output voltage and current] |
| Receiver Sensitivity | — | [DATA_NEEDED: receiver sensitivity] |
| Common-Mode Voltage Range | — | [DATA_NEEDED: common-mode voltage range] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| RoHS | — | unknown |
| REACH | — | unknown |
| AEC-Q100 | — | unknown |