EPC2CC20N vs EPC21LC20 Vergleich
Detaillierter Direktvergleich von EPC2CC20N von Altera und EPC21LC20 von Intel. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | EPC2CC20N | EPC21LC20 |
|---|---|---|
| Marke | Altera | Intel |
| Kategorie | FPGA & CPLD | Memory ICs |
| Lebenszyklusstatus | NRND | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $10,85 | $10,40 |
| Funktion | Configuration device for SRAM-based LUT FPGAs | — |
| Density | [DATA_NEEDED: bitstream density in bits] | 2 Mb (2,097,152 bits) |
| Gehäuse | PLCC-20 | — |
| Configuration Interface | 16-bit parallel (FPP) / Passive Serial (PS) | — |
| Supply Voltage (VCC) | 3.3 V | — |
| Programming Interface | JTAG (IEEE 1149.1) via ByteBlasterMV / USB-Blaster | IEEE 1149.1 (JTAG) |
| In-System Programmable | Yes | — |
| Error Detection | 16-bit CRC on configuration frames | — |
| Configuration Modes Supported | FPP and PS (depends on host FPGA) | — |
| Cascadable | Yes (multiple EPC2 devices for larger bitstreams) | — |
| Open-Drain Status Pin | Yes (CONF_DONE / nSTATUS compatible) | — |
| Betriebstemperatur | [DATA_NEEDED: industrial/commercial temp range] | — |
| Montageart | Surface Mount (PLCC-20 socket compatible) | Surface Mount (PLCC socket or solder) |
| MSL-Level | [DATA_NEEDED: MSL rating] | [DATA_NEEDED: confirm moisture sensitivity level] |
| RoHS-Status | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: confirm from Altera product page] |
| Speichertyp | — | Serial Configuration PROM (Flash-based, in-system programmable) |
| Configuration Mode Supported | — | Serial (PS) for Altera SRAM-based LUT FPGAs |
| Maximum DCLK Frequency | — | 10 MHz |
| Access Time | — | approximately 35 ns [DATA_NEEDED: confirm exact datasheet figure] |
| Program/Erase Endurance | — | 100 cycles minimum [DATA_NEEDED: confirm from datasheet] |
| Operating Voltage (VCC) | — | 3.0 V to 3.6 V (3.3 V typical) |
| Standby Current | — | [DATA_NEEDED: ICCSB value] |
| Active Read Current | — | [DATA_NEEDED: ICC active current] |
| Operating Temperature (commercial) | — | 0 °C to +70 °C (LC suffix) |
| Operating Temperature (industrial) | — | [DATA_NEEDED: -40 to +85 °C for LI variant] |
| Gehäuse / Bauform | — | 20-pin PLCC (J-lead, JEDEC MS-018) |
| Lead-Free (Pb-free) | — | [DATA_NEEDED: confirm] |
| Compatible FPGA Families | — | ACEX, APEX, Cyclone, FLEX, Mercury, Stratix (SRAM-based LUT) |
| JTAG Boundary-Scan Compliant | — | Yes (IEEE Std 1149.1) |
| Data Width | — | 1 bit (serial DATA output) |