EPC2CC20N vs EPC21LC20 Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng EPC2CC20N sa pamamagitan ng Altera at EPC21LC20 sa pamamagitan ng Intel. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Intel
EPC21LC20 - Altera 2 Mb Config PROM for SRAM-based LUT Devices | PLCC-20
EPC21LC20 ✓ NakahandaPagsanggunian na paghahambing
| Parametro | EPC2CC20N | EPC21LC20 |
|---|---|---|
| Brand | Altera | Intel |
| Kategorya | FPGA & CPLD | Memory ICs |
| Katayuan ng Lifecycle | NRND | Aktibo |
| Fungsi | Configuration device for SRAM-based LUT FPGAs | — |
| Density | [DATA_NEEDED: bitstream density in bits] | 2 Mb (2,097,152 bits) |
| Packhaging | PLCC-20 | — |
| Configuration Interface | 16-bit parallel (FPP) / Passive Serial (PS) | — |
| Supply Voltage (VCC) | 3.3 V | — |
| Programming Interface | JTAG (IEEE 1149.1) via ByteBlasterMV / USB-Blaster | IEEE 1149.1 (JTAG) |
| In-System Programmable | Yes | — |
| Error Detection | 16-bit CRC on configuration frames | — |
| Configuration Modes Supported | FPP and PS (depends on host FPGA) | — |
| Cascadable | Yes (multiple EPC2 devices for larger bitstreams) | — |
| Open-Drain Status Pin | Yes (CONF_DONE / nSTATUS compatible) | — |
| Temperature na Operasyon | [DATA_NEEDED: industrial/commercial temp range] | — |
| Uri ng Pagpapasok | Surface Mount (PLCC-20 socket compatible) | Surface Mount (PLCC socket or solder) |
| Level ng MSL | [DATA_NEEDED: MSL rating] | [DATA_NEEDED: confirm moisture sensitivity level] |
| Tindminan RoHS | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: confirm from Altera product page] |
| Uri ng Memory | — | Serial Configuration PROM (Flash-based, in-system programmable) |
| Configuration Mode Supported | — | Serial (PS) for Altera SRAM-based LUT FPGAs |
| Maximum DCLK Frequency | — | 10 MHz |
| Access Time | — | approximately 35 ns [DATA_NEEDED: confirm exact datasheet figure] |
| Program/Erase Endurance | — | 100 cycles minimum [DATA_NEEDED: confirm from datasheet] |
| Operating Voltage (VCC) | — | 3.0 V to 3.6 V (3.3 V typical) |
| Standby Current | — | [DATA_NEEDED: ICCSB value] |
| Active Read Current | — | [DATA_NEEDED: ICC active current] |
| Operating Temperature (commercial) | — | 0 °C to +70 °C (LC suffix) |
| Operating Temperature (industrial) | — | [DATA_NEEDED: -40 to +85 °C for LI variant] |
| Packhaging / Kaso | — | 20-pin PLCC (J-lead, JEDEC MS-018) |
| Lead-Free (Pb-free) | — | [DATA_NEEDED: confirm] |
| Compatible FPGA Families | — | ACEX, APEX, Cyclone, FLEX, Mercury, Stratix (SRAM-based LUT) |
| JTAG Boundary-Scan Compliant | — | Yes (IEEE Std 1149.1) |
| Data Width | — | 1 bit (serial DATA output) |