ICS651MT vs ICS651M Vergleich
Detaillierter Direktvergleich von ICS651MT von Renesas Electronics und ICS651M von Renesas Electronics. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | ICS651MT | ICS651M |
|---|---|---|
| Marke | Renesas Electronics | Renesas Electronics |
| Kategorie | Clock & Timing | Clock & Timing |
| Lebenszyklusstatus | Unknown | Aktiv |
| Device Type | Fanout Buffer (Distribution) | Clock Fanout Buffer (Distribution) IC |
| Clock Buffer Configuration | 1 input to 4 outputs | — |
| Maximum Frequency | 200 MHz | 200 MHz |
| Supply Voltage Range | 1.425 V to 2.625 V | 1.425 V to 2.625 V |
| Alternate Supply Voltage Range | 1.42 V to 2.62 V | — |
| Input Signal Type | Clock | Clock |
| Output Signal Type | Clock | Clock |
| Output Skew | 250 ps | — |
| Interface Standard | CMOS | — |
| Betriebstemperaturbereich | 0 C to 70 C | [DATA_NEEDED: operating temperature range] |
| Gehäuse | 8-pin SOIC, 0.150 inch | 8-SOIC (0.154 inch, 3.90 mm width) |
| Montageart | Surface Mount | Surface Mount |
| Decoupling Capacitor | 0.01 uF between VDD and GND | — |
| Series Output Termination | 33 ohm for clock traces longer than 1 inch | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Lebenszyklusstatus | [DATA_NEEDED: lifecycle status] | — |
| Absolute Maximum Ratings | [DATA_NEEDED: absolute maximum ratings] | — |
| Manufacturer | — | Renesas Electronics Corporation |
| Fanout Ratio | — | 1:4 |
| Number of Clock Inputs | — | 1 input |
| Number of Clock Outputs | — | 4 outputs |
| Nominal Core Supply | — | 2 V |
| Product Function | — | Single-input, four-output clock distribution |
| Clock Skew | — | [DATA_NEEDED: clock skew] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Output Enable | — | [DATA_NEEDED: output enable configuration] |