ICS651MT vs ICS651M Karşılaştırma
Ayrıntılı yan yana karşılaştırma ICS651MT tarafından Renesas Electronics ve ICS651M tarafından Renesas ElectronicsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | ICS651MT | ICS651M |
|---|---|---|
| Marka | Renesas Electronics | Renesas Electronics |
| Kategori | Clock & Timing | Clock & Timing |
| Yaşam Döngüsü Durumu | Unknown | Aktif |
| Device Type | Fanout Buffer (Distribution) | Clock Fanout Buffer (Distribution) IC |
| Clock Buffer Configuration | 1 input to 4 outputs | — |
| Maximum Frequency | 200 MHz | 200 MHz |
| Supply Voltage Range | 1.425 V to 2.625 V | 1.425 V to 2.625 V |
| Alternate Supply Voltage Range | 1.42 V to 2.62 V | — |
| Input Signal Type | Clock | Clock |
| Output Signal Type | Clock | Clock |
| Output Skew | 250 ps | — |
| Interface Standard | CMOS | — |
| İşletim Sıcaklığı Aralığı | 0 C to 70 C | [DATA_NEEDED: operating temperature range] |
| Paket | 8-pin SOIC, 0.150 inch | 8-SOIC (0.154 inch, 3.90 mm width) |
| Montaj Türü | Surface Mount | Surface Mount |
| Decoupling Capacitor | 0.01 uF between VDD and GND | — |
| Series Output Termination | 33 ohm for clock traces longer than 1 inch | — |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Yaşam Döngüsü Durumu | [DATA_NEEDED: lifecycle status] | — |
| Absolute Maximum Ratings | [DATA_NEEDED: absolute maximum ratings] | — |
| Manufacturer | — | Renesas Electronics Corporation |
| Fanout Ratio | — | 1:4 |
| Number of Clock Inputs | — | 1 input |
| Number of Clock Outputs | — | 4 outputs |
| Nominal Core Supply | — | 2 V |
| Product Function | — | Single-input, four-output clock distribution |
| Clock Skew | — | [DATA_NEEDED: clock skew] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Output Enable | — | [DATA_NEEDED: output enable configuration] |