ICS651MT vs ICS651M तुलना
विस्तृत दोनों ओर की तुलना ICS651MT द्वारा Renesas Electronics और ICS651M द्वारा Renesas Electronics. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | ICS651MT | ICS651M |
|---|---|---|
| ब्रांड | Renesas Electronics | Renesas Electronics |
| श्रेणी | Clock & Timing | Clock & Timing |
| लाइफसाइकिल स्थिति | Unknown | सक्रिय |
| Device Type | Fanout Buffer (Distribution) | Clock Fanout Buffer (Distribution) IC |
| Clock Buffer Configuration | 1 input to 4 outputs | — |
| Maximum Frequency | 200 MHz | 200 MHz |
| Supply Voltage Range | 1.425 V to 2.625 V | 1.425 V to 2.625 V |
| Alternate Supply Voltage Range | 1.42 V to 2.62 V | — |
| Input Signal Type | Clock | Clock |
| Output Signal Type | Clock | Clock |
| Output Skew | 250 ps | — |
| Interface Standard | CMOS | — |
| ऑपरेटिंग तापमान रेंज | 0 C to 70 C | [DATA_NEEDED: operating temperature range] |
| पैकेज | 8-pin SOIC, 0.150 inch | 8-SOIC (0.154 inch, 3.90 mm width) |
| माउंटिंग प्रकार | Surface Mount | Surface Mount |
| Decoupling Capacitor | 0.01 uF between VDD and GND | — |
| Series Output Termination | 33 ohm for clock traces longer than 1 inch | — |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| लाइफसाइकिल स्थिति | [DATA_NEEDED: lifecycle status] | — |
| Absolute Maximum Ratings | [DATA_NEEDED: absolute maximum ratings] | — |
| Manufacturer | — | Renesas Electronics Corporation |
| Fanout Ratio | — | 1:4 |
| Number of Clock Inputs | — | 1 input |
| Number of Clock Outputs | — | 4 outputs |
| Nominal Core Supply | — | 2 V |
| Product Function | — | Single-input, four-output clock distribution |
| Clock Skew | — | [DATA_NEEDED: clock skew] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Output Enable | — | [DATA_NEEDED: output enable configuration] |