ICS651MT vs ICS651M Comparaison
Comparaison détaillée côte à côte de ICS651MT par Renesas Electronics et ICS651M par Renesas Electronics. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | ICS651MT | ICS651M |
|---|---|---|
| Marque | Renesas Electronics | Renesas Electronics |
| Catégorie | Clock & Timing | Clock & Timing |
| Statut du cycle de vie | Unknown | Actif |
| Device Type | Fanout Buffer (Distribution) | Clock Fanout Buffer (Distribution) IC |
| Clock Buffer Configuration | 1 input to 4 outputs | — |
| Maximum Frequency | 200 MHz | 200 MHz |
| Supply Voltage Range | 1.425 V to 2.625 V | 1.425 V to 2.625 V |
| Alternate Supply Voltage Range | 1.42 V to 2.62 V | — |
| Input Signal Type | Clock | Clock |
| Output Signal Type | Clock | Clock |
| Output Skew | 250 ps | — |
| Interface Standard | CMOS | — |
| Plage de température de fonctionnement | 0 C to 70 C | [DATA_NEEDED: operating temperature range] |
| Boîtier | 8-pin SOIC, 0.150 inch | 8-SOIC (0.154 inch, 3.90 mm width) |
| Type de montage | Surface Mount | Surface Mount |
| Decoupling Capacitor | 0.01 uF between VDD and GND | — |
| Series Output Termination | 33 ohm for clock traces longer than 1 inch | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Statut du cycle de vie | [DATA_NEEDED: lifecycle status] | — |
| Absolute Maximum Ratings | [DATA_NEEDED: absolute maximum ratings] | — |
| Manufacturer | — | Renesas Electronics Corporation |
| Fanout Ratio | — | 1:4 |
| Number of Clock Inputs | — | 1 input |
| Number of Clock Outputs | — | 4 outputs |
| Nominal Core Supply | — | 2 V |
| Product Function | — | Single-input, four-output clock distribution |
| Clock Skew | — | [DATA_NEEDED: clock skew] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Output Enable | — | [DATA_NEEDED: output enable configuration] |