ICS651MT vs ICS651M Сравнение
Подробное сравнение бок о бок ICS651MT от Renesas Electronics и ICS651M от Renesas Electronics. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
Сравнение характеристик
| Параметр | ICS651MT | ICS651M |
|---|---|---|
| Бренд | Renesas Electronics | Renesas Electronics |
| Категория | Clock & Timing | Clock & Timing |
| Статус жизненного цикла | Unknown | Активен |
| Device Type | Fanout Buffer (Distribution) | Clock Fanout Buffer (Distribution) IC |
| Clock Buffer Configuration | 1 input to 4 outputs | — |
| Maximum Frequency | 200 MHz | 200 MHz |
| Supply Voltage Range | 1.425 V to 2.625 V | 1.425 V to 2.625 V |
| Alternate Supply Voltage Range | 1.42 V to 2.62 V | — |
| Input Signal Type | Clock | Clock |
| Output Signal Type | Clock | Clock |
| Output Skew | 250 ps | — |
| Interface Standard | CMOS | — |
| Диапазон рабочих температур | 0 C to 70 C | [DATA_NEEDED: operating temperature range] |
| Корпус | 8-pin SOIC, 0.150 inch | 8-SOIC (0.154 inch, 3.90 mm width) |
| Тип монтажа | Surface Mount | Surface Mount |
| Decoupling Capacitor | 0.01 uF between VDD and GND | — |
| Series Output Termination | 33 ohm for clock traces longer than 1 inch | — |
| Статус RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Статус жизненного цикла | [DATA_NEEDED: lifecycle status] | — |
| Absolute Maximum Ratings | [DATA_NEEDED: absolute maximum ratings] | — |
| Manufacturer | — | Renesas Electronics Corporation |
| Fanout Ratio | — | 1:4 |
| Number of Clock Inputs | — | 1 input |
| Number of Clock Outputs | — | 4 outputs |
| Nominal Core Supply | — | 2 V |
| Product Function | — | Single-input, four-output clock distribution |
| Clock Skew | — | [DATA_NEEDED: clock skew] |
| Propagation Delay | — | [DATA_NEEDED: propagation delay] |
| Output Enable | — | [DATA_NEEDED: output enable configuration] |