INA121PA vs INA121P Vergleich
Detaillierter Direktvergleich von INA121PA von Texas Instruments und INA121P von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
INA121P - FET-Input Low Power Instrumentation Amplifier DIP-8 | Texas Instruments
INA121P ✓ AktivSpezifikationsvergleich
| Parameter | INA121PA | INA121P |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Amplifier Type | Instrumentation amplifier | Instrumentation Amplifier (3-op-amp topology) |
| Number of Circuits | 1 circuit | — |
| Input Bias Current | ±4 pA | ±4 pA typical |
| Ruhestrom | ±450 µA | ±450 µA typical |
| Input Offset Voltage | ±200 µV | ±200 µV typical |
| Input Offset Drift | ±2 µV/°C | ±2 µV/°C typical |
| Input Noise | 100 nV/√Hz | — |
| Common-Mode Rejection Ratio | 106 dB | — |
| Supply Voltage Range | ±18 V | ±2.25 V to ±18 V |
| Gain Range | 1 to 10,000 V/V | 1 V/V to 10,000 V/V (single external resistor) |
| Gain-Bandwidth Product | 600 kHz | — |
| Nonlinearity Error | 0.001% | 0.001% (G = 10) |
| Architecture | Three-op-amp | — |
| Gehäuse | 8-pin plastic DIP | 8-Pin PDIP (P) |
| Betriebstemperaturbereich | -40°C to +85°C | -40 °C to +85 °C |
| Montageart | Through-hole | Through-Hole |
| RoHS-Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Number of Channels | — | 1 |
| Input Type | — | FET / CMOS |
| Input Voltage Noise Density | — | 20 nV/√Hz at 1 kHz |
| Common-Mode Rejection Ratio (CMRR) | — | 106 dB minimum |
| Bandwidth (-3 dB) | — | 600 kHz at G = 100 |
| Input Protection | — | ±40 V differential and common-mode |
| Slew Rate | — | [DATA_NEEDED: slew rate from datasheet] |
| Lead-Free Finish | — | Yes (Matte Tin) |