INA121PA vs INA121P Perbandingan
Perbandingan bersamaan detil INA121PA dari Texas Instruments dan INA121P dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
Texas Instruments
INA121P - FET-Input Low Power Instrumentation Amplifier DIP-8 | Texas Instruments
INA121P ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | INA121PA | INA121P |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Amplifier Type | Instrumentation amplifier | Instrumentation Amplifier (3-op-amp topology) |
| Number of Circuits | 1 circuit | — |
| Input Bias Current | ±4 pA | ±4 pA typical |
| Arus Memerintah | ±450 µA | ±450 µA typical |
| Input Offset Voltage | ±200 µV | ±200 µV typical |
| Input Offset Drift | ±2 µV/°C | ±2 µV/°C typical |
| Input Noise | 100 nV/√Hz | — |
| Common-Mode Rejection Ratio | 106 dB | — |
| Supply Voltage Range | ±18 V | ±2.25 V to ±18 V |
| Gain Range | 1 to 10,000 V/V | 1 V/V to 10,000 V/V (single external resistor) |
| Gain-Bandwidth Product | 600 kHz | — |
| Nonlinearity Error | 0.001% | 0.001% (G = 10) |
| Architecture | Three-op-amp | — |
| Paket | 8-pin plastic DIP | 8-Pin PDIP (P) |
| Rentang Suhu Kerja | -40°C to +85°C | -40 °C to +85 °C |
| Tipe Mounting | Through-hole | Through-Hole |
| Status RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Number of Channels | — | 1 |
| Input Type | — | FET / CMOS |
| Input Voltage Noise Density | — | 20 nV/√Hz at 1 kHz |
| Common-Mode Rejection Ratio (CMRR) | — | 106 dB minimum |
| Bandwidth (-3 dB) | — | 600 kHz at G = 100 |
| Input Protection | — | ±40 V differential and common-mode |
| Slew Rate | — | [DATA_NEEDED: slew rate from datasheet] |
| Lead-Free Finish | — | Yes (Matte Tin) |