INA121PA vs INA121P Comparación
Comparación detallada lado a lado de INA121PA por Texas Instruments y INA121P por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
INA121P - FET-Input Low Power Instrumentation Amplifier DIP-8 | Texas Instruments
INA121P ✓ ActivoComparación de especificaciones
| Parámetro | INA121PA | INA121P |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Amplifier Type | Instrumentation amplifier | Instrumentation Amplifier (3-op-amp topology) |
| Number of Circuits | 1 circuit | — |
| Input Bias Current | ±4 pA | ±4 pA typical |
| Corriente en reposo | ±450 µA | ±450 µA typical |
| Input Offset Voltage | ±200 µV | ±200 µV typical |
| Input Offset Drift | ±2 µV/°C | ±2 µV/°C typical |
| Input Noise | 100 nV/√Hz | — |
| Common-Mode Rejection Ratio | 106 dB | — |
| Supply Voltage Range | ±18 V | ±2.25 V to ±18 V |
| Gain Range | 1 to 10,000 V/V | 1 V/V to 10,000 V/V (single external resistor) |
| Gain-Bandwidth Product | 600 kHz | — |
| Nonlinearity Error | 0.001% | 0.001% (G = 10) |
| Architecture | Three-op-amp | — |
| Encapsulado | 8-pin plastic DIP | 8-Pin PDIP (P) |
| Rango de temperatura de funcionamiento | -40°C to +85°C | -40 °C to +85 °C |
| Tipo de montaje | Through-hole | Through-Hole |
| Estado RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Number of Channels | — | 1 |
| Input Type | — | FET / CMOS |
| Input Voltage Noise Density | — | 20 nV/√Hz at 1 kHz |
| Common-Mode Rejection Ratio (CMRR) | — | 106 dB minimum |
| Bandwidth (-3 dB) | — | 600 kHz at G = 100 |
| Input Protection | — | ±40 V differential and common-mode |
| Slew Rate | — | [DATA_NEEDED: slew rate from datasheet] |
| Lead-Free Finish | — | Yes (Matte Tin) |