INA121PA vs INA121P Karşılaştırma
Ayrıntılı yan yana karşılaştırma INA121PA tarafından Texas Instruments ve INA121P tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Texas Instruments
INA121P - FET-Input Low Power Instrumentation Amplifier DIP-8 | Texas Instruments
INA121P ✓ AktifÖzellik Karşılaştırması
| Parametre | INA121PA | INA121P |
|---|---|---|
| Marka | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Amplifier Type | Instrumentation amplifier | Instrumentation Amplifier (3-op-amp topology) |
| Number of Circuits | 1 circuit | — |
| Input Bias Current | ±4 pA | ±4 pA typical |
| Durağan Akım | ±450 µA | ±450 µA typical |
| Input Offset Voltage | ±200 µV | ±200 µV typical |
| Input Offset Drift | ±2 µV/°C | ±2 µV/°C typical |
| Input Noise | 100 nV/√Hz | — |
| Common-Mode Rejection Ratio | 106 dB | — |
| Supply Voltage Range | ±18 V | ±2.25 V to ±18 V |
| Gain Range | 1 to 10,000 V/V | 1 V/V to 10,000 V/V (single external resistor) |
| Gain-Bandwidth Product | 600 kHz | — |
| Nonlinearity Error | 0.001% | 0.001% (G = 10) |
| Architecture | Three-op-amp | — |
| Paket | 8-pin plastic DIP | 8-Pin PDIP (P) |
| İşletim Sıcaklığı Aralığı | -40°C to +85°C | -40 °C to +85 °C |
| Montaj Türü | Through-hole | Through-Hole |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Number of Channels | — | 1 |
| Input Type | — | FET / CMOS |
| Input Voltage Noise Density | — | 20 nV/√Hz at 1 kHz |
| Common-Mode Rejection Ratio (CMRR) | — | 106 dB minimum |
| Bandwidth (-3 dB) | — | 600 kHz at G = 100 |
| Input Protection | — | ±40 V differential and common-mode |
| Slew Rate | — | [DATA_NEEDED: slew rate from datasheet] |
| Lead-Free Finish | — | Yes (Matte Tin) |