INA121PA vs INA121P Ikinahambing
Detalyadong pagkakahiwalay na pagkakahambing ng INA121PA sa pamamagitan ng Texas Instruments at INA121P sa pamamagitan ng Texas Instruments. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.
Texas Instruments
INA121PA - Low-Power FET-Input Instrumentation Amplifier | TI
INA121PA ✓ NakahandaTexas Instruments
INA121P - FET-Input Low Power Instrumentation Amplifier DIP-8 | Texas Instruments
INA121P ✓ NakahandaPagsanggunian na paghahambing
| Parametro | INA121PA | INA121P |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Kategorya | Amplifier ICs | Amplifier ICs |
| Katayuan ng Lifecycle | Aktibo | Aktibo |
| Amplifier Type | Instrumentation amplifier | Instrumentation Amplifier (3-op-amp topology) |
| Number of Circuits | 1 circuit | — |
| Input Bias Current | ±4 pA | ±4 pA typical |
| Kuru-kuryente ng Kapayapaan | ±450 µA | ±450 µA typical |
| Input Offset Voltage | ±200 µV | ±200 µV typical |
| Input Offset Drift | ±2 µV/°C | ±2 µV/°C typical |
| Input Noise | 100 nV/√Hz | — |
| Common-Mode Rejection Ratio | 106 dB | — |
| Supply Voltage Range | ±18 V | ±2.25 V to ±18 V |
| Gain Range | 1 to 10,000 V/V | 1 V/V to 10,000 V/V (single external resistor) |
| Gain-Bandwidth Product | 600 kHz | — |
| Nonlinearity Error | 0.001% | 0.001% (G = 10) |
| Architecture | Three-op-amp | — |
| Packhaging | 8-pin plastic DIP | 8-Pin PDIP (P) |
| Hanay ng Temperature na Operasyon | -40°C to +85°C | -40 °C to +85 °C |
| Uri ng Pagpapasok | Through-hole | Through-Hole |
| Tindminan RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Number of Channels | — | 1 |
| Input Type | — | FET / CMOS |
| Input Voltage Noise Density | — | 20 nV/√Hz at 1 kHz |
| Common-Mode Rejection Ratio (CMRR) | — | 106 dB minimum |
| Bandwidth (-3 dB) | — | 600 kHz at G = 100 |
| Input Protection | — | ±40 V differential and common-mode |
| Slew Rate | — | [DATA_NEEDED: slew rate from datasheet] |
| Lead-Free Finish | — | Yes (Matte Tin) |