LM2902YPT vs LM2903VQPWRG4 Vergleich
Detaillierter Direktvergleich von LM2902YPT von STMicroelectronics und LM2903VQPWRG4 von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
STMicroelectronics
LM2902YPT - Low-Power Quad Op Amp, 1.3 MHz | STMicroelectronics
LM2902YPT ✓ AktivSpezifikationsvergleich
| Parameter | LM2902YPT | LM2903VQPWRG4 |
|---|---|---|
| Marke | STMicroelectronics | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Number of Amplifiers | 4 circuits | — |
| Amplifier Type | Low-power general-purpose operational amplifier | — |
| Internal Frequency Compensation | Yes | — |
| Input Bias Current | 20 nA | [DATA_NEEDED: input bias current] |
| Gain-Bandwidth Product | 1.3 MHz | — |
| Slew Rate | 0.4 V/µs | — |
| Typical Input Offset Voltage | 7 mV | — |
| Ausgangstyp | Push-pull | Open collector |
| Supply Voltage Range | 3 V to 36 V | — |
| Betriebstemperaturbereich | -40 °C to +125 °C | [DATA_NEEDED: operating temperature range] |
| Package Type | 14-pin TSSOP | — |
| Montageart | Surface mount | Surface mount |
| Anzahl der Pins | 14 pins | — |
| Automotive and Industrial Design | Yes | — |
| RoHS-Status | Compliant | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | Rail-to-rail |
| Output Current | [DATA_NEEDED: output current rating] | — |
| Versorgungsstrom | [DATA_NEEDED: supply current per amplifier] | — |
| Input Offset Current | [DATA_NEEDED: input offset current] | — |
| Comparator Type | — | Dual differential comparator |
| Number of Channels | — | 2 channels |
| Supply Voltage Rating | — | 18 V |
| Response Time | — | 0.3 us |
| Supply Configuration | — | Single supply or dual supplies |
| Supply Current Drain | — | 0.4 mA typical per comparator |
| Gehäuse | — | 8-TSSOP (PW) |
| Package Width | — | 4.40 mm |
| Product Classification | — | Standard general-purpose comparator |
| Channel Independence | — | 2 independent channels |
| Output Pull-Up Requirement | — | [DATA_NEEDED: external pull-up resistor value] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance] |