LM2902YPT vs LM2903VQPWRG4 So sánh
So sánh chi tiết song song của LM2902YPT bằng STMicroelectronics và LM2903VQPWRG4 bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
STMicroelectronics
LM2902YPT - Low-Power Quad Op Amp, 1.3 MHz | STMicroelectronics
LM2902YPT ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | LM2902YPT | LM2903VQPWRG4 |
|---|---|---|
| Thương hiệu | STMicroelectronics | Texas Instruments |
| Danh mục | Amplifier ICs | Amplifier ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Number of Amplifiers | 4 circuits | — |
| Amplifier Type | Low-power general-purpose operational amplifier | — |
| Internal Frequency Compensation | Yes | — |
| Input Bias Current | 20 nA | [DATA_NEEDED: input bias current] |
| Gain-Bandwidth Product | 1.3 MHz | — |
| Slew Rate | 0.4 V/µs | — |
| Typical Input Offset Voltage | 7 mV | — |
| Kiểu đầu ra | Push-pull | Open collector |
| Supply Voltage Range | 3 V to 36 V | — |
| Khoảng nhiệt độ hoạt động | -40 °C to +125 °C | [DATA_NEEDED: operating temperature range] |
| Package Type | 14-pin TSSOP | — |
| Kiểu lắp đặt | Surface mount | Surface mount |
| Số lượng chân | 14 pins | — |
| Automotive and Industrial Design | Yes | — |
| Trạng thái RoHS | Compliant | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | Rail-to-rail |
| Output Current | [DATA_NEEDED: output current rating] | — |
| Điện áp cung cấp | [DATA_NEEDED: supply current per amplifier] | — |
| Input Offset Current | [DATA_NEEDED: input offset current] | — |
| Comparator Type | — | Dual differential comparator |
| Number of Channels | — | 2 channels |
| Supply Voltage Rating | — | 18 V |
| Response Time | — | 0.3 us |
| Supply Configuration | — | Single supply or dual supplies |
| Supply Current Drain | — | 0.4 mA typical per comparator |
| Hộp | — | 8-TSSOP (PW) |
| Package Width | — | 4.40 mm |
| Product Classification | — | Standard general-purpose comparator |
| Channel Independence | — | 2 independent channels |
| Output Pull-Up Requirement | — | [DATA_NEEDED: external pull-up resistor value] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance] |