LM2902YPT vs LM2903VQPWRG4 Comparaison
Comparaison détaillée côte à côte de LM2902YPT par STMicroelectronics et LM2903VQPWRG4 par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
STMicroelectronics
LM2902YPT - Low-Power Quad Op Amp, 1.3 MHz | STMicroelectronics
LM2902YPT ✓ ActifComparaison des spécifications
| Paramètre | LM2902YPT | LM2903VQPWRG4 |
|---|---|---|
| Marque | STMicroelectronics | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Number of Amplifiers | 4 circuits | — |
| Amplifier Type | Low-power general-purpose operational amplifier | — |
| Internal Frequency Compensation | Yes | — |
| Input Bias Current | 20 nA | [DATA_NEEDED: input bias current] |
| Gain-Bandwidth Product | 1.3 MHz | — |
| Slew Rate | 0.4 V/µs | — |
| Typical Input Offset Voltage | 7 mV | — |
| Type de sortie | Push-pull | Open collector |
| Supply Voltage Range | 3 V to 36 V | — |
| Plage de température de fonctionnement | -40 °C to +125 °C | [DATA_NEEDED: operating temperature range] |
| Package Type | 14-pin TSSOP | — |
| Type de montage | Surface mount | Surface mount |
| Nombre de broches | 14 pins | — |
| Automotive and Industrial Design | Yes | — |
| Statut RoHS | Compliant | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | Rail-to-rail |
| Output Current | [DATA_NEEDED: output current rating] | — |
| Courant d'alimentation | [DATA_NEEDED: supply current per amplifier] | — |
| Input Offset Current | [DATA_NEEDED: input offset current] | — |
| Comparator Type | — | Dual differential comparator |
| Number of Channels | — | 2 channels |
| Supply Voltage Rating | — | 18 V |
| Response Time | — | 0.3 us |
| Supply Configuration | — | Single supply or dual supplies |
| Supply Current Drain | — | 0.4 mA typical per comparator |
| Boîtier | — | 8-TSSOP (PW) |
| Package Width | — | 4.40 mm |
| Product Classification | — | Standard general-purpose comparator |
| Channel Independence | — | 2 independent channels |
| Output Pull-Up Requirement | — | [DATA_NEEDED: external pull-up resistor value] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance] |