LM2902YPT vs LM2903VQPWRG4 Perbandingan
Perbandingan bersamaan detil LM2902YPT dari STMicroelectronics dan LM2903VQPWRG4 dari Texas Instruments. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
STMicroelectronics
LM2902YPT - Low-Power Quad Op Amp, 1.3 MHz | STMicroelectronics
LM2902YPT ✓ AktifPerbandingan Spesifikasi
| Parameter Umum | LM2902YPT | LM2903VQPWRG4 |
|---|---|---|
| Merek | STMicroelectronics | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Number of Amplifiers | 4 circuits | — |
| Amplifier Type | Low-power general-purpose operational amplifier | — |
| Internal Frequency Compensation | Yes | — |
| Input Bias Current | 20 nA | [DATA_NEEDED: input bias current] |
| Gain-Bandwidth Product | 1.3 MHz | — |
| Slew Rate | 0.4 V/µs | — |
| Typical Input Offset Voltage | 7 mV | — |
| Tipe Output | Push-pull | Open collector |
| Supply Voltage Range | 3 V to 36 V | — |
| Rentang Suhu Kerja | -40 °C to +125 °C | [DATA_NEEDED: operating temperature range] |
| Package Type | 14-pin TSSOP | — |
| Tipe Mounting | Surface mount | Surface mount |
| Jumlah Pin | 14 pins | — |
| Automotive and Industrial Design | Yes | — |
| Status RoHS | Compliant | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | Rail-to-rail |
| Output Current | [DATA_NEEDED: output current rating] | — |
| Arus Pemuat | [DATA_NEEDED: supply current per amplifier] | — |
| Input Offset Current | [DATA_NEEDED: input offset current] | — |
| Comparator Type | — | Dual differential comparator |
| Number of Channels | — | 2 channels |
| Supply Voltage Rating | — | 18 V |
| Response Time | — | 0.3 us |
| Supply Configuration | — | Single supply or dual supplies |
| Supply Current Drain | — | 0.4 mA typical per comparator |
| Paket | — | 8-TSSOP (PW) |
| Package Width | — | 4.40 mm |
| Product Classification | — | Standard general-purpose comparator |
| Channel Independence | — | 2 independent channels |
| Output Pull-Up Requirement | — | [DATA_NEEDED: external pull-up resistor value] |
| Input Offset Voltage | — | [DATA_NEEDED: input offset voltage] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance] |